| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Most of this is platform-specific anyway, and we generally have to jump through
fewer hoops to do the equivalent operation on Windows. One benefit for Windows
today is that this new structure avoids an extra `DuplicateHandle` when creating
pipes. For Unix, however, the behavior should be the same.
Note that this is just a pure refactoring, no functionality was added or
removed.
|
|
The function `CreateProcess` is not itself unsafe to call from many threads, the
article in question is pointing out that handles can be inherited by unintended
child processes. This is basically the same race as the standard Unix
open-then-set-cloexec race.
Since the intention of the lock is to protect children from inheriting
unintended handles, the lock is now lifted out to before the creation of the
child I/O handles (which will all be inheritable). This will ensure that we only
have one process in Rust at least creating inheritable handles at a time,
preventing unintended inheritance to children.
|
|
This better reflects what it's actually doing as we don't actually have an
option for "leave this I/O slot as an empty hole".
|
|
On Unix we have to be careful to not call `waitpid` twice, but we don't have to
be careful on Windows due to the way process handles work there. As a result the
cached `Option<ExitStatus>` is only necessary on Unix, and it's also just an
implementation detail of the Unix module.
At the same time. also update some code in `kill` on Unix to avoid a wonky
waitpid with WNOHANG. This was added in 0e190b9a to solve #13124, but the
`signal(0)` method is not supported any more so there's no need to for this
workaround. I believe that this is no longer necessary as it's not really doing
anything.
|
|
This is a Unix-specific function which adds the ability to register a closure to
run pre-exec to configure the child process as required (note that these
closures are run post-fork).
cc #31398
|
|
* Build up the argp/envp pointers while the `Command` is being constructed
rather than only when `spawn` is called. This will allow better sharing of
code between fork/exec paths.
* Rename `child_after_fork` to `exec` and have it only perform the exec half of
the spawning. This also means the return type has changed to `io::Error`
rather than `!` to represent errors that happen.
|
|
|
|
See #29412
|
|
See #29412
|
|
Here's another go at adding emscripten support. This needs to wait again on new [libc definitions](https://github.com/rust-lang-nursery/libc/pull/122) landing. To get the libc definitions right I had to add support for i686-unknown-linux-musl, which are very similar to emscripten's, which are derived from arm/musl.
This branch additionally removes the makefile dependency on the `EMSCRIPTEN` environment variable by not building the unused compiler-rt.
Again, this is not sufficient for actually compiling to asmjs since it needs additional LLVM patches.
r? @alexcrichton
|
|
|
|
Backtraces, and the compilation of libbacktrace for asmjs, are disabled.
This port doesn't use jemalloc so, like pnacl, it disables jemalloc *for all targets*
in the configure file.
It disables stack protection.
|
|
These commits finish up closing out https://github.com/rust-lang/rust/issues/24237 by filling out all locations we create new file descriptors with variants that atomically create the file descriptor and set CLOEXEC where possible. Previous support for doing this in `File::open` was added in #27971 and support for `try_clone` was added in #27980. This commit fills out:
* `Socket::new` now passes `SOCK_CLOEXEC`
* `Socket::accept` now uses `accept4`
* `pipe2` is used instead of `pipe`
Unfortunately most of this support is Linux-specific, and most of it is post-2.6.18 (our oldest supported version), so all of the detection here is done dynamically. It looks like OSX does not have equivalent variants for these functions, so there's nothing more we can do there. Support for BSDs can be added over time if they also have these functions.
Closes #24237
|
|
Abort on stack overflow instead of re-raising SIGSEGV
We use guard pages that cause the process to abort to protect against
undefined behavior in the event of stack overflow. We have a handler
that catches segfaults, prints out an error message if the segfault was
due to a stack overflow, then unregisters itself and returns to allow
the signal to be re-raised and kill the process.
This caused some confusion, as it was unexpected that safe code would be
able to cause a segfault, while it's easy to overflow the stack in safe
code. To avoid this confusion, when we detect a segfault in the guard
page, abort instead of the previous behavior of re-raising SIGSEGV.
To test this, we need to adapt the tests for segfault to actually check
the exit status. Doing so revealed that the existing test for segfault
behavior was actually invalid; LLVM optimizes the explicit null pointer
reference down to an illegal instruction, so the program aborts with
SIGILL instead of SIGSEGV and the test didn't actually trigger the
signal handler at all. Use a C helper function to get a null pointer
that LLVM can't optimize away, so we get our segfault instead.
This is a [breaking-change] if anyone is relying on the exact signal
raised to kill a process on stack overflow.
Closes #31273
|
|
We use guard pages that cause the process to abort to protect against
undefined behavior in the event of stack overflow. We have a handler
that catches segfaults, prints out an error message if the segfault was
due to a stack overflow, then unregisters itself and returns to allow
the signal to be re-raised and kill the process.
This caused some confusion, as it was unexpected that safe code would be
able to cause a segfault, while it's easy to overflow the stack in safe
code. To avoid this confusion, when we detect a segfault in the guard
page, abort instead of the previous behavior of re-raising the SIGSEGV.
To test this, we need to adapt the tests for segfault to actually check
the exit status. Doing so revealed that the existing test for segfault
behavior was actually invalid; LLVM optimizes the explicit null pointer
reference down to an illegal instruction, so the program aborts with
SIGILL instead of SIGSEGV and the test didn't actually trigger the
signal handler at all. Use a C helper function to get a null pointer
that LLVM can't optimize away, so we get our segfault instead.
This is a [breaking-change] if anyone is relying on the exact signal
raised to kill a process on stack overflow.
Closes #31273
|
|
This commit attempts to use the `pipe2` syscall on Linux to atomically set the
CLOEXEC flag for pipes created. Unfortunately this was added in 2.6.27 so we
have to dynamically determine whether we can use it or not.
This commit also updates the `fds-are-cloexec.rs` test to test stdio handles for
spawned processes as well.
|
|
This is necessary to atomically accept a socket and set the CLOEXEC flag at the
same time. Support only appeared in Linux 2.6.28 so we have to dynamically
determine which syscall we're supposed to call in this case.
|
|
Right now we only attempt to call one symbol which my not exist everywhere,
__pthread_get_minstack, but this pattern will come up more often as we start to
bind newer functionality of systems like Linux.
Take a similar strategy as the Windows implementation where we use `dlopen` to
lookup whether a symbol exists or not.
|
|
This commit adds support for creating sockets with the `SOCK_CLOEXEC` flag.
Support for this flag was added in Linux 2.6.27, however, and support does not
exist on platforms other than Linux. For this reason we still have the same
fallback as before but just special case Linux if we can.
|
|
Similar to the previous commit, if `F_DUPFD_CLOEXEC` succeeds then there's no
need for us to then call `set_cloexec` on platforms other than Linux. The bug
mentioned of kernels not actually setting the `CLOEXEC` flag has only been
repored on Linux, not elsewhere.
|
|
On Linux we have to do this for binary compatibility with 2.6.18, but for other
OSes (e.g. OSX/BSDs/etc) they all support this flag so we don't need to pass it.
|
|
These accessors are used to get at the last modification, last access, and
creation time of the underlying file. Currently not all platforms provide the
creation time, so that currently returns `Option`.
|
|
- use `symlink_file` and `symlink_dir` instead of the old `soft_link`
- create a junction instead of a directory symlink for testing recursive_rmdir (as it causes the
same troubles, but can be created by users without `SeCreateSymbolicLinkPrivilege`)
- `remove_dir_all` was unable to remove directory symlinks and junctions
- only run tests that create symlinks if we have the right permissions.
- rename `Path2` to `Path`
- remove the global `#[allow(deprecated)]` and outdated comments
- After factoring out `create_junction()` from the test `directory_junctions_are_directories` and
removing needlessly complex code, what I was left with was:
```
#[test]
#[cfg(windows)]
fn directory_junctions_are_directories() {
use sys::fs::create_junction;
let tmpdir = tmpdir();
let foo = tmpdir.join("foo");
let bar = tmpdir.join("bar");
fs::create_dir(&foo).unwrap();
check!(create_junction(&foo, &bar));
assert!(bar.metadata().unwrap().is_dir());
}
```
It test whether a junction is a directory instead of a reparse point. But it actually test the
target of the junction (which is a directory if it exists) instead of the junction itself, which
should always be a symlink. So this test is invalid, and I expect it only exists because the
author was suprised by it. So I removed it.
Some things that do not yet work right:
- relative symlinks do not accept forward slashes
- the conversion of paths for `create_junction` is hacky
- `remove_dir_all` now messes with the internal data of `FileAttr` to be able to remove symlinks.
We should add some method like `is_symlink_dir()` to it, so code outside the standard library
can see the difference between file and directory symlinks too.
|
|
|
|
I have it set as stable right now under the rationale that it's extending an existing, stable API to another type in the "obvious" way.
r? @alexcrichton
cc @reem
|
|
|
|
This pull request adds support for [Illumos](http://illumos.org/)-based operating systems: SmartOS, OpenIndiana, and others. For now it's x86-64 only, as I'm not sure if 32-bit installations are widespread. This PR is based on #28589 by @potatosalad, and also closes #21000, #25845, and #25846.
Required changes in libc are already merged: https://github.com/rust-lang-nursery/libc/pull/138
Here's a snapshot required to build a stage0 compiler:
https://s3-eu-west-1.amazonaws.com/nbaksalyar/rustc-sunos-snapshot.tar.gz
It passes all checks from `make check`.
There are some changes I'm not quite sure about, e.g. macro usage in `src/libstd/num/f64.rs` and `DirEntry` structure in `src/libstd/sys/unix/fs.rs`, so any comments on how to rewrite it better would be greatly appreciated.
Also, LLVM configure script might need to be patched to build it successfully, or a pre-built libLLVM should be used. Some details can be found here: https://llvm.org/bugs/show_bug.cgi?id=25409
Thanks!
r? @brson
|
|
|
|
This reports an error at the point of calling `Command::spawn()` or one of
its equivalents.
Fixes #30858
Fixes #30862
|
|
This reports an error at the point of calling `Command::spawn()` or one of
its equivalents.
Fixes https://github.com/rust-lang/rust/issues/30858
Fixes https://github.com/rust-lang/rust/issues/30862
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Currently the `mipsel-unknown-linux-gnu` target doesn't actually set the
`target_arch` value to `mipsel` but it rather uses `mips`. Alternatively the
`powerpc64le` target does indeed set the `target_arch` as `powerpc64le`,
causing a bit of inconsistency between theset two.
As these are just the same instance of one instruction set, let's use
`target_endian` to switch between them and only set the `target_arch` as one
value. This should cut down on the number of `#[cfg]` annotations necessary and
all around be a little more ergonomic.
|
|
|
|
Currently the `mipsel-unknown-linux-gnu` target doesn't actually set the
`target_arch` value to `mipsel` but it rather uses `mips`. Alternatively the
`powerpc64le` target does indeed set the `target_arch` as `powerpc64le`,
causing a bit of inconsistency between theset two.
As these are just the same instance of one instruction set, let's use
`target_endian` to switch between them and only set the `target_arch` as one
value. This should cut down on the number of `#[cfg]` annotations necessary and
all around be a little more ergonomic.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This target covers MIPS devices that run the trunk version of OpenWRT.
The x86_64-unknown-linux-musl target always links statically to C libraries. For
the mips(el)-unknown-linux-musl target, we opt for dynamic linking (like most of
other targets do) to keep binary size down.
As for the C compiler flags used in the build system, we use the same flags used
for the mips(el)-unknown-linux-gnu target.
r? @alexcrichton
|
|
These commits perform a few high-level changes with the goal of enabling i686 MSVC unwinding:
* LLVM is upgraded to pick up the new exception handling instructions and intrinsics for MSVC. This puts us somewhere along the 3.8 branch, but we should still be compatible with LLVM 3.7 for non-MSVC targets.
* All unwinding for MSVC targets (both 32 and 64-bit) are implemented in terms of this new LLVM support. I would like to also extend this to Windows GNU targets to drop the runtime dependencies we have on MinGW, but I'd like to land this first.
* Some tests were fixed up for i686 MSVC here and there where necessary. The full test suite should be passing now for that target.
In terms of landing this I plan to have this go through first, then verify that i686 MSVC works, then I'll enable `make check` on the bots for that target instead of just `make` as-is today.
Closes #25869
|
|
This commit transitions the compiler to using the new exception handling
instructions in LLVM for implementing unwinding for MSVC. This affects both 32
and 64-bit MSVC as they're both now using SEH-based strategies. In terms of
standard library support, lots more details about how SEH unwinding is
implemented can be found in the commits.
In terms of trans, this change necessitated a few modifications:
* Branches were added to detect when the old landingpad instruction is used or
the new cleanuppad instruction is used to `trans::cleanup`.
* The return value from `cleanuppad` is not stored in an `alloca` (because it
cannot be).
* Each block in trans now has an `Option<LandingPad>` instead of `is_lpad: bool`
for indicating whether it's in a landing pad or not. The new exception
handling intrinsics require that on MSVC each `call` inside of a landing pad
is annotated with which landing pad that it's in. This change to the basic
block means that whenever a `call` or `invoke` instruction is generated we
know whether to annotate it as part of a cleanuppad or not.
* Lots of modifications were made to the instruction builders to construct the
new instructions as well as pass the tagging information for the call/invoke
instructions.
* The translation of the `try` intrinsics for MSVC has been overhauled to use
the new `catchpad` instruction. The filter function is now also a
rustc-generated function instead of a purely libstd-defined function. The
libstd definition still exists, it just has a stable ABI across architectures
and leaves some of the really weird implementation details to the compiler
(e.g. the `localescape` and `localrecover` intrinsics).
|
|
This target covers MIPS devices that run the trunk version of OpenWRT.
The x86_64-unknown-linux-musl target always links statically to C libraries. For
the mips(el)-unknown-linux-musl target, we opt for dynamic linking (like most of
other targets do) to keep binary size down.
As for the C compiler flags used in the build system, we use the same flags used
for the mips(el)-unknown-linux-gnu target.
|
|
Looks like the rumprun build has bitrotted over time, so this includes some libc
fixes and some various libstd fixes which gets it back to bootstrapping.
|
