| Age | Commit message (Collapse) | Author | Lines |
|---|
|
This pull request adds support for [Illumos](http://illumos.org/)-based operating systems: SmartOS, OpenIndiana, and others. For now it's x86-64 only, as I'm not sure if 32-bit installations are widespread. This PR is based on #28589 by @potatosalad, and also closes #21000, #25845, and #25846.
Required changes in libc are already merged: https://github.com/rust-lang-nursery/libc/pull/138
Here's a snapshot required to build a stage0 compiler:
https://s3-eu-west-1.amazonaws.com/nbaksalyar/rustc-sunos-snapshot.tar.gz
It passes all checks from `make check`.
There are some changes I'm not quite sure about, e.g. macro usage in `src/libstd/num/f64.rs` and `DirEntry` structure in `src/libstd/sys/unix/fs.rs`, so any comments on how to rewrite it better would be greatly appreciated.
Also, LLVM configure script might need to be patched to build it successfully, or a pre-built libLLVM should be used. Some details can be found here: https://llvm.org/bugs/show_bug.cgi?id=25409
Thanks!
r? @brson
|
|
|
|
This reports an error at the point of calling `Command::spawn()` or one of
its equivalents.
Fixes #30858
Fixes #30862
|
|
This reports an error at the point of calling `Command::spawn()` or one of
its equivalents.
Fixes https://github.com/rust-lang/rust/issues/30858
Fixes https://github.com/rust-lang/rust/issues/30862
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Currently the `mipsel-unknown-linux-gnu` target doesn't actually set the
`target_arch` value to `mipsel` but it rather uses `mips`. Alternatively the
`powerpc64le` target does indeed set the `target_arch` as `powerpc64le`,
causing a bit of inconsistency between theset two.
As these are just the same instance of one instruction set, let's use
`target_endian` to switch between them and only set the `target_arch` as one
value. This should cut down on the number of `#[cfg]` annotations necessary and
all around be a little more ergonomic.
|
|
|
|
Currently the `mipsel-unknown-linux-gnu` target doesn't actually set the
`target_arch` value to `mipsel` but it rather uses `mips`. Alternatively the
`powerpc64le` target does indeed set the `target_arch` as `powerpc64le`,
causing a bit of inconsistency between theset two.
As these are just the same instance of one instruction set, let's use
`target_endian` to switch between them and only set the `target_arch` as one
value. This should cut down on the number of `#[cfg]` annotations necessary and
all around be a little more ergonomic.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This target covers MIPS devices that run the trunk version of OpenWRT.
The x86_64-unknown-linux-musl target always links statically to C libraries. For
the mips(el)-unknown-linux-musl target, we opt for dynamic linking (like most of
other targets do) to keep binary size down.
As for the C compiler flags used in the build system, we use the same flags used
for the mips(el)-unknown-linux-gnu target.
r? @alexcrichton
|
|
These commits perform a few high-level changes with the goal of enabling i686 MSVC unwinding:
* LLVM is upgraded to pick up the new exception handling instructions and intrinsics for MSVC. This puts us somewhere along the 3.8 branch, but we should still be compatible with LLVM 3.7 for non-MSVC targets.
* All unwinding for MSVC targets (both 32 and 64-bit) are implemented in terms of this new LLVM support. I would like to also extend this to Windows GNU targets to drop the runtime dependencies we have on MinGW, but I'd like to land this first.
* Some tests were fixed up for i686 MSVC here and there where necessary. The full test suite should be passing now for that target.
In terms of landing this I plan to have this go through first, then verify that i686 MSVC works, then I'll enable `make check` on the bots for that target instead of just `make` as-is today.
Closes #25869
|
|
This commit transitions the compiler to using the new exception handling
instructions in LLVM for implementing unwinding for MSVC. This affects both 32
and 64-bit MSVC as they're both now using SEH-based strategies. In terms of
standard library support, lots more details about how SEH unwinding is
implemented can be found in the commits.
In terms of trans, this change necessitated a few modifications:
* Branches were added to detect when the old landingpad instruction is used or
the new cleanuppad instruction is used to `trans::cleanup`.
* The return value from `cleanuppad` is not stored in an `alloca` (because it
cannot be).
* Each block in trans now has an `Option<LandingPad>` instead of `is_lpad: bool`
for indicating whether it's in a landing pad or not. The new exception
handling intrinsics require that on MSVC each `call` inside of a landing pad
is annotated with which landing pad that it's in. This change to the basic
block means that whenever a `call` or `invoke` instruction is generated we
know whether to annotate it as part of a cleanuppad or not.
* Lots of modifications were made to the instruction builders to construct the
new instructions as well as pass the tagging information for the call/invoke
instructions.
* The translation of the `try` intrinsics for MSVC has been overhauled to use
the new `catchpad` instruction. The filter function is now also a
rustc-generated function instead of a purely libstd-defined function. The
libstd definition still exists, it just has a stable ABI across architectures
and leaves some of the really weird implementation details to the compiler
(e.g. the `localescape` and `localrecover` intrinsics).
|
|
This target covers MIPS devices that run the trunk version of OpenWRT.
The x86_64-unknown-linux-musl target always links statically to C libraries. For
the mips(el)-unknown-linux-musl target, we opt for dynamic linking (like most of
other targets do) to keep binary size down.
As for the C compiler flags used in the build system, we use the same flags used
for the mips(el)-unknown-linux-gnu target.
|
|
Looks like the rumprun build has bitrotted over time, so this includes some libc
fixes and some various libstd fixes which gets it back to bootstrapping.
|
|
This commit removes the `-D warnings` flag being passed through the makefiles to
all crates to instead be a crate attribute. We want these attributes always
applied for all our standard builds, and this is more amenable to Cargo-based
builds as well.
Note that all `deny(warnings)` attributes are gated with a `cfg(stage0)`
attribute currently to match the same semantics we have today
|
|
The deny(warnings) attribute is now enabled for tests so we need to weed out
these warnings as well.
|
|
On all platforms, reading from stdin where the actual stdin isn't present should
return 0 bytes as having been read rather than the entire buffer.
On Windows, handle the case where we're inheriting stdio handles but one of them
isn't present. Currently the behavior is to fail returning an I/O error but
instead this commit corrects it to detecting this situation and propagating the
non-set handle.
Closes #31167
|
|
The implementation changed in 33a2191d, but the comments did not change
to match.
|
|
Tracking issue: #30014
This implements the RFC and makes a few other changes.
I have added a few extra tests, and made the Windows and
Unix code as similar as possible.
Part of the RFC mentions the unstable OpenOptionsExt trait
on Windows (see #27720). I have added a few extra methods
to future-proof it for CreateFile2.
|
|
Otherwise it is not Send and Sync anymore
|
|
This commit stabilizes and deprecates the FCP (final comment period) APIs for
the upcoming 1.7 beta release. The specific APIs which changed were:
Stabilized
* `Path::strip_prefix` (renamed from `relative_from`)
* `path::StripPrefixError` (new error type returned from `strip_prefix`)
* `Ipv4Addr::is_loopback`
* `Ipv4Addr::is_private`
* `Ipv4Addr::is_link_local`
* `Ipv4Addr::is_multicast`
* `Ipv4Addr::is_broadcast`
* `Ipv4Addr::is_documentation`
* `Ipv6Addr::is_unspecified`
* `Ipv6Addr::is_loopback`
* `Ipv6Addr::is_unique_local`
* `Ipv6Addr::is_multicast`
* `Vec::as_slice`
* `Vec::as_mut_slice`
* `String::as_str`
* `String::as_mut_str`
* `<[T]>::clone_from_slice` - the `usize` return value is removed
* `<[T]>::sort_by_key`
* `i32::checked_rem` (and other signed types)
* `i32::checked_neg` (and other signed types)
* `i32::checked_shl` (and other signed types)
* `i32::checked_shr` (and other signed types)
* `i32::saturating_mul` (and other signed types)
* `i32::overflowing_add` (and other signed types)
* `i32::overflowing_sub` (and other signed types)
* `i32::overflowing_mul` (and other signed types)
* `i32::overflowing_div` (and other signed types)
* `i32::overflowing_rem` (and other signed types)
* `i32::overflowing_neg` (and other signed types)
* `i32::overflowing_shl` (and other signed types)
* `i32::overflowing_shr` (and other signed types)
* `u32::checked_rem` (and other unsigned types)
* `u32::checked_neg` (and other unsigned types)
* `u32::checked_shl` (and other unsigned types)
* `u32::saturating_mul` (and other unsigned types)
* `u32::overflowing_add` (and other unsigned types)
* `u32::overflowing_sub` (and other unsigned types)
* `u32::overflowing_mul` (and other unsigned types)
* `u32::overflowing_div` (and other unsigned types)
* `u32::overflowing_rem` (and other unsigned types)
* `u32::overflowing_neg` (and other unsigned types)
* `u32::overflowing_shl` (and other unsigned types)
* `u32::overflowing_shr` (and other unsigned types)
* `ffi::IntoStringError`
* `CString::into_string`
* `CString::into_bytes`
* `CString::into_bytes_with_nul`
* `From<CString> for Vec<u8>`
* `From<CString> for Vec<u8>`
* `IntoStringError::into_cstring`
* `IntoStringError::utf8_error`
* `Error for IntoStringError`
Deprecated
* `Path::relative_from` - renamed to `strip_prefix`
* `Path::prefix` - use `components().next()` instead
* `os::unix::fs` constants - moved to the `libc` crate
* `fmt::{radix, Radix, RadixFmt}` - not used enough to stabilize
* `IntoCow` - conflicts with `Into` and may come back later
* `i32::{BITS, BYTES}` (and other integers) - not pulling their weight
* `DebugTuple::formatter` - will be removed
* `sync::Semaphore` - not used enough and confused with system semaphores
Closes #23284
cc #27709 (still lots more methods though)
Closes #27712
Closes #27722
Closes #27728
Closes #27735
Closes #27729
Closes #27755
Closes #27782
Closes #27798
|
|
|
|
This wasn't done in https://github.com/rust-lang/rust/pull/29083 because attributes weren't parsed on fields of tuple variant back then.
r? @alexcrichton
|
|
This adds support for big endian and little endian PowerPC64.
make check runs clean apart from one big endian backtrace issue.
|
|
|
|
|
|
The following PR updates libc version to latest commits for correctly support openbsd.
It corrects several points in rustc to be compatible with libc changes.
r? @alexcrichton
|
|
This adds the ability to override the default OOM behavior by setting a handler function. This is used by libstd to print a message when running out of memory instead of crashing with an obscure "illegal hardware instruction" error (at least on Linux).
Fixes #14674
|
|
And mark the new methods as unstable.
|
|
|
|
Tracking issue: #30014
This implements the RFC and makes a few other changes.
I have added a few extra tests, and made the Windows and
Unix code as similar as possible.
Part of the RFC mentions the unstable OpenOptionsExt trait
on Windows (see #27720). I have added a few extra methods
to future-proof it for CreateFile2.
|
|
This adds support for big endian and little endian PowerPC64.
make check runs clean apart from one big endian backtrace issue.
|
|
|
|
`siginfo_si_addr()` function is used once, and the returned value is
casted to `usize`. So make the function returns a `usize`.
it simplifies OpenBSD case, where the return type wouldn't be a `*mut
libc::c_void` but a `*mut libc::c_char`.
|
|
|
|
* If the requested descriptors to inherit are stdio descriptors there
are situations where they will not be set correctly
* Example: parent's stdout --> child's stderr
parent's stderr --> child's stdout
* Solution: if the requested descriptors for the child are stdio
descriptors, `dup` them before overwriting the child's stdio
Example of a program which exhibits the bug:
```rust
// stdio.rs
use std::io::Write;
use std::io::{stdout, stderr};
use std::process::{Command, Stdio};
use std::os::unix::io::FromRawFd;
fn main() {
stdout().write_all("parent stdout\n".as_bytes()).unwrap();
stderr().write_all("parent stderr\n".as_bytes()).unwrap();
Command::new("sh")
.arg("-c")
.arg("echo 'child stdout'; echo 'child stderr' 1>&2")
.stdin(Stdio::inherit())
.stdout(unsafe { FromRawFd::from_raw_fd(2) })
.stderr(unsafe { FromRawFd::from_raw_fd(1) })
.status()
.unwrap_or_else(|e| { panic!("failed to execute process: {}", e) });
}
```
Before:
```
$ rustc --version
rustc 1.7.0-nightly (8ad12c3e2 2015-12-19)
$ rustc stdio.rs && ./stdio >out 2>err
$ cat out
parent stdout
$ cat err
parent stderr
child stdout
child stderr
```
After (expected):
```
$ rustc --version
rustc 1.7.0-dev (712eccee2 2015-12-19)
$ rustc stdio.rs && ./stdio >out 2>err
$ cat out
parent stdout
child stderr
$ cat err
parent stderr
child stdout
```
|
|
See rust-lang/rfcs#1413.
r? @alexcrichton
|
|
|
|
|
|
|
