| Age | Commit message (Collapse) | Author | Lines |
|---|
|
This commit moves Mutable, Map, MutableMap, Set, and MutableSet from
`core::collections` to the `collections` crate at the top-level. Additionally,
this removes the `deque` module and moves the `Deque` trait to only being
available at the top-level of the collections crate.
All functionality continues to be reexported through `std::collections`.
[breaking-change]
|
|
Also renames the `Container` trait to `Collection`.
[breaking-change]
|
|
|
|
|
|
|
|
|
|
Examples!
Fixes #14714.
|
|
|
|
|
|
As part of the libstd facade efforts, this commit extracts the runtime interface
out of the standard library into a standalone crate, librustrt. This crate will
provide the following services:
* Definition of the rtio interface
* Definition of the Runtime interface
* Implementation of the Task structure
* Implementation of task-local-data
* Implementation of task failure via unwinding via libunwind
* Implementation of runtime initialization and shutdown
* Implementation of thread-local-storage for the local rust Task
Notably, this crate avoids the following services:
* Thread creation and destruction. The crate does not require the knowledge of
an OS threading system, and as a result it seemed best to leave out the
`rt::thread` module from librustrt. The librustrt module does depend on
mutexes, however.
* Implementation of backtraces. There is no inherent requirement for the runtime
to be able to generate backtraces. As will be discussed later, this
functionality continues to live in libstd rather than librustrt.
As usual, a number of architectural changes were required to make this crate
possible. Users of "stable" functionality will not be impacted by this change,
but users of the `std::rt` module will likely note the changes. A list of
architectural changes made is:
* The stdout/stderr handles no longer live directly inside of the `Task`
structure. This is a consequence of librustrt not knowing about `std::io`.
These two handles are now stored inside of task-local-data.
The handles were originally stored inside of the `Task` for perf reasons, and
TLD is not currently as fast as it could be. For comparison, 100k prints goes
from 59ms to 68ms (a 15% slowdown). This appeared to me to be an acceptable
perf loss for the successful extraction of a librustrt crate.
* The `rtio` module was forced to duplicate more functionality of `std::io`. As
the module no longer depends on `std::io`, `rtio` now defines structures such
as socket addresses, addrinfo fiddly bits, etc. The primary change made was
that `rtio` now defines its own `IoError` type. This type is distinct from
`std::io::IoError` in that it does not have an enum for what error occurred,
but rather a platform-specific error code.
The native and green libraries will be updated in later commits for this
change, and the bulk of this effort was put behind updating the two libraries
for this change (with `rtio`).
* Printing a message on task failure (along with the backtrace) continues to
live in libstd, not in librustrt. This is a consequence of the above decision
to move the stdout/stderr handles to TLD rather than inside the `Task` itself.
The unwinding API now supports registration of global callback functions which
will be invoked when a task fails, allowing for libstd to register a function
to print a message and a backtrace.
The API for registering a callback is experimental and unsafe, as the
ramifications of running code on unwinding is pretty hairy.
* The `std::unstable::mutex` module has moved to `std::rt::mutex`.
* The `std::unstable::sync` module has been moved to `std::rt::exclusive` and
the type has been rewritten to not internally have an Arc and to have an RAII
guard structure when locking. Old code should stop using `Exclusive` in favor
of the primitives in `libsync`, but if necessary, old code should port to
`Arc<Exclusive<T>>`.
* The local heap has been stripped down to have fewer debugging options. None of
these were tested, and none of these have been used in a very long time.
[breaking-change]
|
|
The rtio interface is a thin low-level interface over the I/O subsystems, and
the `Path` type is a little too high-level for this interface.
|
|
|
|
|
|
This grows a new option inside of rustdoc to add the ability to submit examples
to an external website. If the `--markdown-playground-url` command line option
or crate doc attribute `html_playground_url` is present, then examples will have
a button on hover to submit the code to the playground specified.
This commit enables submission of example code to play.rust-lang.org. The code
submitted is that which is tested by rustdoc, not necessarily the exact code
shown in the example.
Closes #14654
|
|
|
|
There were a few examples in the macros::builtin module that weren't being run
because they were being #[cfg]'d out.
Closes #14697
|
|
Also fix documentation references to PartialEq.
|
|
This commit carries out the request from issue #14678:
> The method `Iterator::len()` is surprising, as all the other uses of
> `len()` do not consume the value. `len()` would make more sense to be
> called `count()`, but that would collide with the current
> `Iterator::count(|T| -> bool) -> unit` method. That method, however, is
> a bit redundant, and can be easily replaced with
> `iter.filter(|x| x < 5).count()`.
> After this change, we could then define the `len()` method
> on `iter::ExactSize`.
Closes #14678.
[breaking-change]
|
|
|
|
|
|
Just opening a pull request for adding code examples and documentation to std::os.
More to come soon.
|
|
|
|
As with the previous commit with `librand`, this commit shuffles around some
`collections` code. The new state of the world is similar to that of librand:
* The libcollections crate now only depends on libcore and liballoc.
* The standard library has a new module, `std::collections`. All functionality
of libcollections is reexported through this module.
I would like to stress that this change is purely cosmetic. There are very few
alterations to these primitives.
There are a number of notable points about the new organization:
* std::{str, slice, string, vec} all moved to libcollections. There is no reason
that these primitives shouldn't be necessarily usable in a freestanding
context that has allocation. These are all reexported in their usual places in
the standard library.
* The `hashmap`, and transitively the `lru_cache`, modules no longer reside in
`libcollections`, but rather in libstd. The reason for this is because the
`HashMap::new` contructor requires access to the OSRng for initially seeding
the hash map. Beyond this requirement, there is no reason that the hashmap
could not move to libcollections.
I do, however, have a plan to move the hash map to the collections module. The
`HashMap::new` function could be altered to require that the `H` hasher
parameter ascribe to the `Default` trait, allowing the entire `hashmap` module
to live in libcollections. The key idea would be that the default hasher would
be different in libstd. Something along the lines of:
// src/libstd/collections/mod.rs
pub type HashMap<K, V, H = RandomizedSipHasher> =
core_collections::HashMap<K, V, H>;
This is not possible today because you cannot invoke static methods through
type aliases. If we modified the compiler, however, to allow invocation of
static methods through type aliases, then this type definition would
essentially be switching the default hasher from `SipHasher` in libcollections
to a libstd-defined `RandomizedSipHasher` type. This type's `Default`
implementation would randomly seed the `SipHasher` instance, and otherwise
perform the same as `SipHasher`.
This future state doesn't seem incredibly far off, but until that time comes,
the hashmap module will live in libstd to not compromise on functionality.
* In preparation for the hashmap moving to libcollections, the `hash` module has
moved from libstd to libcollections. A previously snapshotted commit enables a
distinct `Writer` trait to live in the `hash` module which `Hash`
implementations are now parameterized over.
Due to using a custom trait, the `SipHasher` implementation has lost its
specialized methods for writing integers. These can be re-added
backwards-compatibly in the future via default methods if necessary, but the
FNV hashing should satisfy much of the need for speedier hashing.
A list of breaking changes:
* HashMap::{get, get_mut} no longer fails with the key formatted into the error
message with `{:?}`, instead, a generic message is printed. With backtraces,
it should still be not-too-hard to track down errors.
* The HashMap, HashSet, and LruCache types are now available through
std::collections instead of the collections crate.
* Manual implementations of hash should be parameterized over `hash::Writer`
instead of just `Writer`.
[breaking-change]
|
|
|
|
|
|
A few notable improvements were implemented to cut down on the number of aborts
triggered by the standard library when a local task is not found.
* Primarily, the unwinding functionality was restructured to support an unsafe
top-level function, `try`. This function invokes a closure, capturing any
failure which occurs inside of it. The purpose of this function is to be as
lightweight of a "try block" as possible for rust, intended for use when the
runtime is difficult to set up.
This function is *not* meant to be used by normal rust code, nor should it be
consider for use with normal rust code.
* When invoking spawn(), a `fail!()` is triggered rather than an abort.
* When invoking LocalIo::borrow(), which is transitively called by all I/O
constructors, None is returned rather than aborting to indicate that there is
no local I/O implementation.
A test case was also added showing the variety of things that you can do without
a runtime or task set up now. In general, this is just a refactoring to abort
less quickly in the standard library when a local task is not found.
|
|
For both window and unix platforms.
|
|
This PR adds two features to make it possible to transform an `Iterator<u8>` into a `Reader`. The first patch adds a method to mutable slices that allows it to be updated with an `Iterator<T>` without paying for the bounds cost. The second adds a Iterator adaptor, `IterReader`, to provide that `Reader` interface.
I had two questions. First, are these named the right things? Second, should `IterReader` instead wrap an `Iterator<Result<u8, E>>`? This would allow you to `IterReader::new(rdr.bytes())`, which could be useful if you want to apply some iterator transformations on a reader while still exporting the Reader interface, but I'd expect there'd be a lot of overhead annotating each byte with an error result.
|
|
This commit removes the <M: Any + Send> type parameter from Option::expect in
favor of just taking a hard-coded `&str` argument. This allows this function to
move into libcore.
Previous code using strings with `expect` will continue to work, but code using
this implicitly to transmit task failure will need to unwrap manually with a
`match` statement.
[breaking-change]
Closes #14008
|
|
libc: only provide an rlib.
There's absolutely no reason for `libc` to be offered as a dynamic
library.
|
|
A few notable improvements were implemented to cut down on the number of aborts
triggered by the standard library when a local task is not found.
* Primarily, the unwinding functionality was restructured to support an unsafe
top-level function, `try`. This function invokes a closure, capturing any
failure which occurs inside of it. The purpose of this function is to be as
lightweight of a "try block" as possible for rust, intended for use when the
runtime is difficult to set up.
This function is *not* meant to be used by normal rust code, nor should it be
consider for use with normal rust code.
* When invoking spawn(), a `fail!()` is triggered rather than an abort.
* When invoking LocalIo::borrow(), which is transitively called by all I/O
constructors, None is returned rather than aborting to indicate that there is
no local I/O implementation.
* Invoking get() on a TLD key will return None if no task is available
* Invoking replace() on a TLD key will fail if no task is available.
A test case was also added showing the variety of things that you can do without
a runtime or task set up now. In general, this is just a refactoring to abort
less quickly in the standard library when a local task is not found.
|
|
|
|
There's absolutely no reason for `libc` to be offered as a dynamic
library.
|
|
This commit removes the <M: Any + Send> type parameter from Option::expect in
favor of just taking a hard-coded `&str` argument. This allows this function to
move into libcore.
Previous code using strings with `expect` will continue to work, but code using
this implicitly to transmit task failure will need to unwrap manually with a
`match` statement.
[breaking-change]
Closes #14008
|
|
Unlike ImmutableClonableVector::permutations() which returns an iterator,
cloning the entire array each iteration, these methods mutate the vector in-place.
For that reason, these methods are much faster; between 35-55 times faster,
depending on the benchmark. They also generate permutations in lexicographical order.
|
|
|
|
Now that rustdoc understands proper language tags
as the code not being Rust, we can tag everything
properly.
This change tags examples in other languages by
their language. Plain notations are marked as `text`.
Console examples are marked as `console`.
Also fix markdown.rs to not highlight non-rust code.
|
|
This completes the last stage of the renaming of the comparison hierarchy of
traits. This change renames TotalEq to Eq and TotalOrd to Ord.
In the future the new Eq/Ord will be filled out with their appropriate methods,
but for now this change is purely a renaming change.
[breaking-change]
|
|
This commit adds support in rustdoc to recognize the `#[doc(primitive = "foo")]`
attribute. This attribute indicates that the current module is the "owner" of
the primitive type `foo`. For rustdoc, this means that the doc-comment for the
module is the doc-comment for the primitive type, plus a signal to all
downstream crates that hyperlinks for primitive types will be directed at the
crate containing the `#[doc]` directive.
Additionally, rustdoc will favor crates closest to the one being documented
which "implements the primitive type". For example, documentation of libcore
links to libcore for primitive types, but documentation for libstd and beyond
all links to libstd for primitive types.
This change involves no compiler modifications, it is purely a rustdoc change.
The landing pages for the primitive types primarily serve to show a list of
implemented traits for the primitive type itself.
The primitive types documented includes both strings and slices in a semi-ad-hoc
way, but in a way that should provide at least somewhat meaningful
documentation.
Closes #14474
|
|
Adds a platform-specific function, `split_paths` to the `os` module. This
function can be used to parse PATH-like environment variables according to
local platform conventions.
Closes #14352.
|
|
Adds a platform-specific function, `split_paths` to the `os` module. This
function can be used to parse PATH-like environment variables according to
local platform conventions.
Closes #14352.
|
|
This is part of the ongoing renaming of the equality traits. See #12517 for more
details. All code using Eq/Ord will temporarily need to move to Partial{Eq,Ord}
or the Total{Eq,Ord} traits. The Total traits will soon be renamed to {Eq,Ord}.
cc #12517
[breaking-change]
|
|
|
|
|
|
A number of functions/methods have been moved or renamed to align
better with rust standard conventions.
std::reflect::MovePtrAdaptor => MovePtrAdaptor::new
debug::reflect::MovePtrAdaptor => MovePtrAdaptor::new
std::repr::ReprVisitor => ReprVisitor::new
debug::repr::ReprVisitor => ReprVisitor::new
rustuv::homing::HomingIO.go_to_IO_home => go_to_io_home
[breaking-change]
|
|
According to Rust's style guide acronyms in type names should be
CamelCase.
[breaking-change]
|
|
r=alexcrichton
We already have into_string(), but it was implemented in terms of
into_owned(). Flip it around and deprecate into_owned().
Remove a few spurious calls to .into_owned() that existed in libregex
and librustdoc.
|
|
This commit shuffles around some of the `rand` code, along with some
reorganization. The new state of the world is as follows:
* The librand crate now only depends on libcore. This interface is experimental.
* The standard library has a new module, `std::rand`. This interface will
eventually become stable.
Unfortunately, this entailed more of a breaking change than just shuffling some
names around. The following breaking changes were made to the rand library:
* Rng::gen_vec() was removed. This has been replaced with Rng::gen_iter() which
will return an infinite stream of random values. Previous behavior can be
regained with `rng.gen_iter().take(n).collect()`
* Rng::gen_ascii_str() was removed. This has been replaced with
Rng::gen_ascii_chars() which will return an infinite stream of random ascii
characters. Similarly to gen_iter(), previous behavior can be emulated with
`rng.gen_ascii_chars().take(n).collect()`
* {IsaacRng, Isaac64Rng, XorShiftRng}::new() have all been removed. These all
relied on being able to use an OSRng for seeding, but this is no longer
available in librand (where these types are defined). To retain the same
functionality, these types now implement the `Rand` trait so they can be
generated with a random seed from another random number generator. This allows
the stdlib to use an OSRng to create seeded instances of these RNGs.
* Rand implementations for `Box<T>` and `@T` were removed. These seemed to be
pretty rare in the codebase, and it allows for librand to not depend on
liballoc. Additionally, other pointer types like Rc<T> and Arc<T> were not
supported. If this is undesirable, librand can depend on liballoc and regain
these implementations.
* The WeightedChoice structure is no longer built with a `Vec<Weighted<T>>`,
but rather a `&mut [Weighted<T>]`. This means that the WeightedChoice
structure now has a lifetime associated with it.
* The `sample` method on `Rng` has been moved to a top-level function in the
`rand` module due to its dependence on `Vec`.
cc #13851
[breaking-change]
|
|
* Removes `format_strbuf!()`
|
|
We already have into_string(), but it was implemented in terms of
into_owned(). Flip it around and deprecate into_owned().
Remove a few spurious calls to .into_owned() that existed in libregex
and librustdoc.
|
