| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Add `io` and `arch` modules to `std::os::fortanix_sgx`
This PR adds two more (unstable) modules to `std::os::fortanix_sgx` for the `x86_64-fortanix-unknown-sgx` target.
### io
`io` allows conversion between raw file descriptors and Rust types, similar to `std::os::unix::io`.
### arch
`arch` exposes the `ENCLU[EREPORT]` and `ENCLU[EGETKEY]` instructions. The current functions are very likely not going to be the final form of these functions (see also https://github.com/fortanix/rust-sgx/issues/15), but this should be sufficient to enable experimentation in libraries. I tried using the actual types (from the [`sgx-isa` crate](https://crates.io/crates/sgx-isa)) instead of byte arrays, but that would make `std` dependent on the `bitflags` crate which I didn't want to do at this time.
|
|
|
|
|
|
|
|
|
|
|
|
Update the stdsimd submodule
This brings in a few updates:
* Update wasm intrinsic naming for atomics
* Update and reimplement most simd128 wasm intrinsics
* Other misc improvements here and there, including a small start to
AVX-512 intrinsics
|
|
This commit switches the standard library to using the `backtrace-sys`
crate from crates.io instead of duplicating the logic here in the Rust
repositor with the `backtrace-sys`'s crate's logic.
Eventually this will hopefully be a good step towards using the
`backtrace` crate directly from crates.io itself, but we're not quite
there yet! Hopefully this is a small incremental first step we can take.
|
|
Add `std::os::fortanix_sgx` module
This PR adds the `std::os::sgx` module to expose platform-specific APIs behind the `sgx_platform` feature gate.
Depends on https://github.com/rust-lang/rust/pull/56972 to be able to meaningfully build `std::os` documentation for non-standard targets.
Tracking issue: https://github.com/rust-lang/rust/issues/56975
|
|
Stabilize min_const_unsafe_fn in 1.33
Fixes #55607
r? @oli-obk
|
|
Pin stabilization
This implements the changes suggested in https://github.com/rust-lang/rust/issues/55766#issue-378417538 and stabilizes the `pin` feature. @alexcrichton also listed several "blockers" in that issue, but then in [this comment](https://github.com/rust-lang/rust/issues/55766#issuecomment-445074980) mentioned that they're more "TODO items":
> In that vein I think it's fine for a stabilization PR to be posted at any time now with FCP lapsed for a week or so now. The final points about self/pin/pinned can be briefly discussed there (if even necessary, they could be left as the proposal above).
Let's settle these last bits here and get this thing stabilized! :)
r? @alexcrichton
cc @withoutboats
|
|
|
|
Fixed typo in HashMap documentation
Previously "with a custom type as key", now "with a custom key type"
|
|
r=Centril
Fix feature gate to point to 1.32.0 for `path_from_str`
When the feature has been added back (#55148) the feature gate has not
been adjusted accordingly. We have it enabled for 1.32.0, currently in
Beta, so adjust it.
Refs: #44431.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Inline tweaks
r? @michaelwoerister
|
|
r=alexcrichton
Adding unwinding support for x86_64_fortanix_unknown_sgx target.
Unwinding support is provided by our port of LLVM's libunwind which is available from https://github.com/fortanix/libunwind/tree/release_50.
libunwind requires support for rwlock and printing to stderr, which is only provided by `std` for this target. This poses two problems: 1) how to expose the `std` functionality to C and 2) dependency inversion.
### Exposing `std`
For exposing the functionality we chose to expose the following symbols:
* __rust_rwlock_rdlock
* __rust_rwlock_wrlock
* __rust_rwlock_unlock
* __rust_print_err
* __rust_abort
Also, the following are needed from `alloc`:
* __rust_alloc
* __rust_dealloc
#### Rust RWLock in C
In `libunwind`, RWLock is initialized as a templated static variable:
```c
pthread_rwlock_t DwarfFDECache<A>::_lock = PTHREAD_RWLOCK_INITIALIZER;
```
I don't know of a good way to use the Rust sys::rwlock::RWLock type and initializer there. We could have a static global variable in Rust, but that doesn't work with the templating. The variable needs to be initialized statically, since this target doesn't support the .init section. Currently, I just used a byte array and standard C array initialization. The mapping between this C type and the Rust type needs to be manually maintained. There is a compile-time check and a unit test to make sure the Rust versions of these C definitions match the actual Rust type. If any reviewer knows of a better solution, please do tell.
### Dependency inversion issue
`std` depends on `panic_unwind` which depends on `libunwind`, and `libunwind` depends on `std`. This is not normally supported by Rust's linking system. Therefore we use raw C exports from `std` *and* `libunwind.a` is linked last in the target `post_link_objects` instead of being built as part of the Rust `libunwind`. Currently, all C exports are defined in `src/libstd/sys/sgx/rwlock.rs` to overcome LTO issues. Only the `__rust_rwlock_*` definitions *need* to live there for privacy reasons. Once again, if any reviewer knows of a better solution, please do tell.
r? @alexcrichton
|
|
r=QuietMisdreavus
deny intra-doc link resolution failures in libstd
Fixes #56693.
Until we land a fix for the underlying issue (#56922), we can at least fix the failures in libstd so they don't propagate to downstream crates.
|
|
rename div_euc -> div_euclid, and mod_euc -> rem_euclid
logic is written up in #49048
Also, update the documentation slightly.
cc @alexcrichton @clarcharr @varkor
|
|
|
|
Remove pin::Unpin reexport and add Unpin to the prelude.
Change Pin associated functions to methods.
Rename get_mut_unchecked_ to get_unchecked_mut
Remove impl Unpin for Pin
Mark Pin repr(transparent)
|
|
On musl targets assume certain symbols exist (like pipe2 and accept4).
This fixes #56675.
I don't know if this is the best solution, or if I should also add some tests so I'm waiting for some feedback.
Thanks!
|
|
Previously "with a custom type as key", now "with a custom key type"
|
|
|
|
When the feature has been added back (#55148) the feature gate has not
been adjusted accordingly. We have it enabled for 1.32.0, currently in
Beta, so adjust it.
Refs: #44431.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
Always run rustc in a thread
cc @ishitatsuyuki @eddyb
r? @pnkfelix
[Previously](https://github.com/rust-lang/rust/pull/48575) we moved to only producing threads when absolutely necessary. Even before we opted to only create threads in some cases, which [is unsound](https://github.com/rust-lang/rust/pull/48575#issuecomment-380635967) due to the way we use thread local storage.
|
|
r=nikomatsakis
Less conservative uninhabitedness check
Extends the uninhabitedness check to structs, non-empty enums, tuples and arrays.
Pulled out of #47291 and #50262.
Fixes https://github.com/rust-lang/rust/issues/54586.
r? @nikomatsakis
|
|
|
|
|
|
|
|
|
|
Defactored Bytes::read
Removed unneeded refactoring of read_one_byte, which removed the unneeded dynamic dispatch (`dyn Read`) used by that function.
This function is only used in one place in the entire Rust codebase; there doesn't seem to be a reason for it to exist (and there especially doesn't seem to be a reason for it to use dynamic dispatch)
|
|
This reverts commit 134661917bf4b086b027a2c58219d50ba57a1453.
|
|
|
|
|
|
|
|
|
|
logic is written up in https://github.com/rust-lang/rust/issues/49048
Also, update the documentation slightly
|
|
This brings in a few updates:
* Update wasm intrinsic naming for atomics
* Update and reimplement most simd128 wasm intrinsics
* Other misc improvements here and there, including a small start to
AVX-512 intrinsics
|
|
Fix doc of `std::fs::canonicalize`
Point out that the final component of the path name might be a filename
(and not a directory name). Previously, the doc said that all components
of the path must be directory names, when it actually only ment all but
the final one.
Fixes #54056.
|
|
Fix a small mistake regarding NaNs in a deprecation message
`max` on floats returns the other argument if one of them is NaN, which
would be `0.0` in this case. This is unlike the C functions `fdim` and
`fdimf` which return NaN if either of their arguments is NaN.
https://doc.rust-lang.org/1.31.0/std/primitive.f32.html#method.max
https://en.cppreference.com/w/c/numeric/math/fdim
|
|
std: Use `rustc_demangle` from crates.io
No more need to duplicate the demangling routine between crates.io and
the standard library, we can use the exact same one!
|
|
Add FreeBSD unsigned char platforms to std::os::raw
Reference: https://www.freebsd.org/cgi/man.cgi?query=arch&apropos=0&sektion=7
|
|
Point out that the final component of the path name might be a filename
(and not a directory name). Previously, the doc said that all components
of the path must be directory names, when it actually only ment all but
the final one.
Fixes #54056.
|
|
`max` on floats returns the other argument if one of them is NaN, which
would be `0.0` in this case. This is unlike the C functions `fdim` and
`fdimf` which return NaN if either of their arguments is NaN.
https://doc.rust-lang.org/1.31.0/std/primitive.f32.html#method.max
https://en.cppreference.com/w/c/numeric/math/fdim
|
|
Fix docs path to PermissionsExt
Couldn't test the link yet, since I didn't figure out how to build std rustdocs without building the entire compiler itself :slightly_smiling_face:
|
|
Add missing urls in ffi module docs
r? @QuietMisdreavus
|
|
No more need to duplicate the demangling routine between crates.io and
the standard library, we can use the exact same one!
|
|
|
|
|
