| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Spelling fix compatibel -> compatible
Reviewed-by: Gankro
|
|
Conflicts:
src/test/compile-fail/borrowck-move-out-of-overloaded-auto-deref.rs
src/test/compile-fail/issue-2590.rs
src/test/compile-fail/lint-stability.rs
src/test/compile-fail/slice-mut-2.rs
src/test/compile-fail/std-uncopyable-atomics.rs
|
|
This adds the int_uint feature to *every* library, whether or not it
needs it.
|
|
This gets rid of the 'experimental' level, removes the non-staged_api
case (i.e. stability levels for out-of-tree crates), and lets the
staged_api attributes use 'unstable' and 'deprecated' lints.
This makes the transition period to the full feature staging design
a bit nicer.
|
|
|
|
|
|
|
|
Conflicts:
src/compiletest/compiletest.rs
src/libcollections/lib.rs
src/libserialize/lib.rs
src/libsyntax/feature_gate.rs
|
|
|
|
Conflicts:
src/libcollections/vec.rs
src/libcore/fmt/mod.rs
src/librustc/lint/builtin.rs
src/librustc/session/config.rs
src/librustc_trans/trans/base.rs
src/librustc_trans/trans/context.rs
src/librustc_trans/trans/type_.rs
src/librustc_typeck/check/_match.rs
src/librustdoc/html/format.rs
src/libsyntax/std_inject.rs
src/libsyntax/util/interner.rs
src/test/compile-fail/mut-pattern-mismatched.rs
|
|
Conflicts:
src/libcollections/vec.rs
src/libcore/fmt/mod.rs
src/librustdoc/html/format.rs
|
|
Conflicts:
src/libserialize/lib.rs
|
|
Closes #20421
[breaking-change]
r? @brson
|
|
This partially implements the feature staging described in the
[release channel RFC][rc]. It does not yet fully conform to the RFC as
written, but does accomplish its goals sufficiently for the 1.0 alpha
release.
It has three primary user-visible effects:
* On the nightly channel, use of unstable APIs generates a warning.
* On the beta channel, use of unstable APIs generates a warning.
* On the beta channel, use of feature gates generates a warning.
Code that does not trigger these warnings is considered 'stable',
modulo pre-1.0 bugs.
Disabling the warnings for unstable APIs continues to be done in the
existing (i.e. old) style, via `#[allow(...)]`, not that specified in
the RFC. I deem this marginally acceptable since any code that must do
this is not using the stable dialect of Rust.
Use of feature gates is itself gated with the new 'unstable_features'
lint, on nightly set to 'allow', and on beta 'warn'.
The attribute scheme used here corresponds to an older version of the
RFC, with the `#[staged_api]` crate attribute toggling the staging
behavior of the stability attributes, but the user impact is only
in-tree so I'm not concerned about having to make design changes later
(and I may ultimately prefer the scheme here after all, with the
`#[staged_api]` crate attribute).
Since the Rust codebase itself makes use of unstable features the
compiler and build system do a midly elaborate dance to allow it to
bootstrap while disobeying these lints (which would otherwise be
errors because Rust builds with `-D warnings`).
This patch includes one significant hack that causes a
regression. Because the `format_args!` macro emits calls to unstable
APIs it would trigger the lint. I added a hack to the lint to make it
not trigger, but this in turn causes arguments to `println!` not to be
checked for feature gates. I don't presently understand macro
expansion well enough to fix. This is bug #20661.
Closes #16678
[rc]: https://github.com/rust-lang/rfcs/blob/master/text/0507-release-channels.md
Next steps are to disable the existing out-of-tree behavior for stability attributes, and convert the remaining system to be feature-based per the RFC. During the first beta cycle we will set these lints to 'forbid'.
|
|
This commit aims to prepare the `std::hash` module for alpha by formalizing its
current interface whileholding off on adding `#[stable]` to the new APIs. The
current usage with the `HashMap` and `HashSet` types is also reconciled by
separating out composable parts of the design. The primary goal of this slight
redesign is to separate the concepts of a hasher's state from a hashing
algorithm itself.
The primary change of this commit is to separate the `Hasher` trait into a
`Hasher` and a `HashState` trait. Conceptually the old `Hasher` trait was
actually just a factory for various states, but hashing had very little control
over how these states were used. Additionally the old `Hasher` trait was
actually fairly unrelated to hashing.
This commit redesigns the existing `Hasher` trait to match what the notion of a
`Hasher` normally implies with the following definition:
trait Hasher {
type Output;
fn reset(&mut self);
fn finish(&self) -> Output;
}
This `Hasher` trait emphasizes that hashing algorithms may produce outputs other
than a `u64`, so the output type is made generic. Other than that, however, very
little is assumed about a particular hasher. It is left up to implementors to
provide specific methods or trait implementations to feed data into a hasher.
The corresponding `Hash` trait becomes:
trait Hash<H: Hasher> {
fn hash(&self, &mut H);
}
The old default of `SipState` was removed from this trait as it's not something
that we're willing to stabilize until the end of time, but the type parameter is
always required to implement `Hasher`. Note that the type parameter `H` remains
on the trait to enable multidispatch for specialization of hashing for
particular hashers.
Note that `Writer` is not mentioned in either of `Hash` or `Hasher`, it is
simply used as part `derive` and the implementations for all primitive types.
With these definitions, the old `Hasher` trait is realized as a new `HashState`
trait in the `collections::hash_state` module as an unstable addition for
now. The current definition looks like:
trait HashState {
type Hasher: Hasher;
fn hasher(&self) -> Hasher;
}
The purpose of this trait is to emphasize that the one piece of functionality
for implementors is that new instances of `Hasher` can be created. This
conceptually represents the two keys from which more instances of a
`SipHasher` can be created, and a `HashState` is what's stored in a
`HashMap`, not a `Hasher`.
Implementors of custom hash algorithms should implement the `Hasher` trait, and
only hash algorithms intended for use in hash maps need to implement or worry
about the `HashState` trait.
The entire module and `HashState` infrastructure remains `#[unstable]` due to it
being recently redesigned, but some other stability decision made for the
`std::hash` module are:
* The `Writer` trait remains `#[experimental]` as it's intended to be replaced
with an `io::Writer` (more details soon).
* The top-level `hash` function is `#[unstable]` as it is intended to be generic
over the hashing algorithm instead of hardwired to `SipHasher`
* The inner `sip` module is now private as its one export, `SipHasher` is
reexported in the `hash` module.
And finally, a few changes were made to the default parameters on `HashMap`.
* The `RandomSipHasher` default type parameter was renamed to `RandomState`.
This renaming emphasizes that it is not a hasher, but rather just state to
generate hashers. It also moves away from the name "sip" as it may not always
be implemented as `SipHasher`. This type lives in the
`std::collections::hash_map` module as `#[unstable]`
* The associated `Hasher` type of `RandomState` is creatively called...
`Hasher`! This concrete structure lives next to `RandomState` as an
implemenation of the "default hashing algorithm" used for a `HashMap`. Under
the hood this is currently implemented as `SipHasher`, but it draws an
explicit interface for now and allows us to modify the implementation over
time if necessary.
There are many breaking changes outlined above, and as a result this commit is
a:
[breaking-change]
|
|
|
|
To avoid using the feauture, change uses of `box <expr>` to
`Box::new(<expr>)` alternative, as noted by the feature gate message.
(Note that box patterns have no analogous trivial replacement, at
least not in general; you need to revise the code to do a partial
match, deref, and then the rest of the match.)
[breaking-change]
|
|
This partially implements the feature staging described in the
[release channel RFC][rc]. It does not yet fully conform to the RFC as
written, but does accomplish its goals sufficiently for the 1.0 alpha
release.
It has three primary user-visible effects:
* On the nightly channel, use of unstable APIs generates a warning.
* On the beta channel, use of unstable APIs generates a warning.
* On the beta channel, use of feature gates generates a warning.
Code that does not trigger these warnings is considered 'stable',
modulo pre-1.0 bugs.
Disabling the warnings for unstable APIs continues to be done in the
existing (i.e. old) style, via `#[allow(...)]`, not that specified in
the RFC. I deem this marginally acceptable since any code that must do
this is not using the stable dialect of Rust.
Use of feature gates is itself gated with the new 'unstable_features'
lint, on nightly set to 'allow', and on beta 'warn'.
The attribute scheme used here corresponds to an older version of the
RFC, with the `#[staged_api]` crate attribute toggling the staging
behavior of the stability attributes, but the user impact is only
in-tree so I'm not concerned about having to make design changes later
(and I may ultimately prefer the scheme here after all, with the
`#[staged_api]` crate attribute).
Since the Rust codebase itself makes use of unstable features the
compiler and build system to a midly elaborate dance to allow it to
bootstrap while disobeying these lints (which would otherwise be
errors because Rust builds with `-D warnings`).
This patch includes one significant hack that causes a
regression. Because the `format_args!` macro emits calls to unstable
APIs it would trigger the lint. I added a hack to the lint to make it
not trigger, but this in turn causes arguments to `println!` not to be
checked for feature gates. I don't presently understand macro
expansion well enough to fix. This is bug #20661.
Closes #16678
[rc]: https://github.com/rust-lang/rfcs/blob/master/text/0507-release-channels.md
|
|
This commit performs a pass over the implementations of the new `String` trait
in the formatting module. Some implementations were removed as a conservative
move pending an upcoming convention about `String` implementations, and some
were added in order to retain consistency across the libraries. Specifically:
* All "smart pointers" implement `String` now, adding missing implementations
for `Arc` and `Rc`.
* The `Vec<T>` and `[T]` types no longer implement `String`.
* The `*const T` and `*mut T` type no longer implement `String`.
* The `()` type no longer implements `String`.
* The `Path` type's `Show` implementation does not surround itself with `Path
{}` (a minor tweak).
All implementations of `String` in this PR were also marked `#[stable]` to
indicate that the types will continue to implement the `String` trait regardless
of what it looks like.
|
|
|
|
|
|
This commit performs a pass over the `std::macros` module, applying stability
attributes where necessary. In particular, this audits macros for patterns such
as:
* Standard use of forward-to-format-args via `$($arg:tt)*` (or `+`)
* Prevent macro-defined identifiers from leaking into expression arguments as
hygiene is not perfectly implemented.
* Wherever possible, `$crate` is used now.
Specifically, the following actions were taken:
* The `std::macros` module itself is no longer public.
* The `panic!` macro is stable
* The `assert!` macro is stable
* The `assert_eq!` macro is stable
* The `debug_assert!` macro is stable
* The `debug_assert_eq!` macro is stable
* The `unreachable!` macro is stable after removing the extra forms to bring the
definition in line with the `unimplemented!` macro.
* The `try!` macro is stable
* The `vec!` macro is stable
[breaking-change]
|
|
This commit aims to prepare the `std::hash` module for alpha by formalizing its
current interface whileholding off on adding `#[stable]` to the new APIs. The
current usage with the `HashMap` and `HashSet` types is also reconciled by
separating out composable parts of the design. The primary goal of this slight
redesign is to separate the concepts of a hasher's state from a hashing
algorithm itself.
The primary change of this commit is to separate the `Hasher` trait into a
`Hasher` and a `HashState` trait. Conceptually the old `Hasher` trait was
actually just a factory for various states, but hashing had very little control
over how these states were used. Additionally the old `Hasher` trait was
actually fairly unrelated to hashing.
This commit redesigns the existing `Hasher` trait to match what the notion of a
`Hasher` normally implies with the following definition:
trait Hasher {
type Output;
fn reset(&mut self);
fn finish(&self) -> Output;
}
This `Hasher` trait emphasizes that hashing algorithms may produce outputs other
than a `u64`, so the output type is made generic. Other than that, however, very
little is assumed about a particular hasher. It is left up to implementors to
provide specific methods or trait implementations to feed data into a hasher.
The corresponding `Hash` trait becomes:
trait Hash<H: Hasher> {
fn hash(&self, &mut H);
}
The old default of `SipState` was removed from this trait as it's not something
that we're willing to stabilize until the end of time, but the type parameter is
always required to implement `Hasher`. Note that the type parameter `H` remains
on the trait to enable multidispatch for specialization of hashing for
particular hashers.
Note that `Writer` is not mentioned in either of `Hash` or `Hasher`, it is
simply used as part `derive` and the implementations for all primitive types.
With these definitions, the old `Hasher` trait is realized as a new `HashState`
trait in the `collections::hash_state` module as an unstable addition for
now. The current definition looks like:
trait HashState {
type Hasher: Hasher;
fn hasher(&self) -> Hasher;
}
The purpose of this trait is to emphasize that the one piece of functionality
for implementors is that new instances of `Hasher` can be created. This
conceptually represents the two keys from which more instances of a
`SipHasher` can be created, and a `HashState` is what's stored in a
`HashMap`, not a `Hasher`.
Implementors of custom hash algorithms should implement the `Hasher` trait, and
only hash algorithms intended for use in hash maps need to implement or worry
about the `HashState` trait.
The entire module and `HashState` infrastructure remains `#[unstable]` due to it
being recently redesigned, but some other stability decision made for the
`std::hash` module are:
* The `Writer` trait remains `#[experimental]` as it's intended to be replaced
with an `io::Writer` (more details soon).
* The top-level `hash` function is `#[unstable]` as it is intended to be generic
over the hashing algorithm instead of hardwired to `SipHasher`
* The inner `sip` module is now private as its one export, `SipHasher` is
reexported in the `hash` module.
And finally, a few changes were made to the default parameters on `HashMap`.
* The `RandomSipHasher` default type parameter was renamed to `RandomState`.
This renaming emphasizes that it is not a hasher, but rather just state to
generate hashers. It also moves away from the name "sip" as it may not always
be implemented as `SipHasher`. This type lives in the
`std::collections::hash_map` module as `#[unstable]`
* The associated `Hasher` type of `RandomState` is creatively called...
`Hasher`! This concrete structure lives next to `RandomState` as an
implemenation of the "default hashing algorithm" used for a `HashMap`. Under
the hood this is currently implemented as `SipHasher`, but it draws an
explicit interface for now and allows us to modify the implementation over
time if necessary.
There are many breaking changes outlined above, and as a result this commit is
a:
[breaking-change]
|
|
Closes #20421
[breaking-change]
|
|
This PR introduces `isize` and `usize` modules to `core` and `std`, and
deprecates the existing `int` and `uint` modules. The rustdoc primitive
type links now point to these new modules.
Due to deprecation this is a:
[breaking-change]
|
|
|
|
Fix misspelled comments.
Reviewed-by: steveklabnik
|
|
|
|
I cleaned up comments prior to the 1.0 alpha release.
|
|
|
|
|
|
|
|
Believe or not, `CreateProcess()` is racy if several threads create
child processes: [0], [1], [2].
This caused some tests show crash dialogs during
`make check-stage#-rpass`.
More explanation:
On Windows, `SetErrorMode()` controls display of error dialogs: it
accepts new error mode and returns old error mode.
The error mode is process-global and automatically inherited to child
process when created.
MSYS2 bash shell internally sets it to not show error dialogs, therefore
`make check-stage#-rpass` should not show them either.
However, [1] says that `CreateProcess()` internally invokes
`SetErrorMode()` twice: at first it sets mode `0x8001` and saves
original mode, and at second it restores original mode.
So if two threads simultaneously call `CreateProcess()`, the first
thread sets error mode to `0x8001` then the second thread recognizes
that current error mode is `0x8001`. Therefore, The second thread will
create process with wrong error mode.
This really occurs inside `compiletest`: it creates several processes on
each thread, so some `run-pass` tests are invoked with wrong error mode
therefore show crash dialog.
This commit adds `StaticMutex` for `CreateProcess()` call. This seems
to fix the "dialog annoyance" issue.
[0]: http://support.microsoft.com/kb/315939
[1]: https://code.google.com/p/nativeclient/issues/detail?id=2968
[2]: https://ghc.haskell.org/trac/ghc/ticket/2650
|
|
This commit takes a first pass at stabilizing `std::thread`:
* It removes the `detach` method in favor of two constructors -- `spawn`
for detached threads, `scoped` for "scoped" (i.e., must-join)
threads. This addresses some of the surprise/frustrating debug
sessions with the previous API, in which `spawn` produced a guard that
on destruction joined the thread (unless `detach` was called).
The reason to have the division in part is that `Send` will soon not
imply `'static`, which means that `scoped` thread creation can take a
closure over *shared stack data* of the parent thread. On the other
hand, this means that the parent must not pop the relevant stack
frames while the child thread is running. The `JoinGuard` is used to
prevent this from happening by joining on drop (if you have not
already explicitly `join`ed.) The APIs around `scoped` are
future-proofed for the `Send` changes by taking an additional lifetime
parameter. With the current definition of `Send`, this is forced to be
`'static`, but when `Send` changes these APIs will gain their full
flexibility immediately.
Threads that are `spawn`ed, on the other hand, are detached from the
start and do not yield an RAII guard.
The hope is that, by making `scoped` an explicit opt-in with a very
suggestive name, it will be drastically less likely to be caught by a
surprising deadlock due to an implicit join at the end of a scope.
* The module itself is marked stable.
* Existing methods other than `spawn` and `scoped` are marked stable.
The migration path is:
```rust
Thread::spawn(f).detached()
```
becomes
```rust
Thread::spawn(f)
```
while
```rust
let res = Thread::spawn(f);
res.join()
```
becomes
```rust
let res = Thread::scoped(f);
res.join()
```
[breaking-change]
|
|
Conflicts:
src/libsyntax/parse/parser.rs
|
|
Conflicts:
src/libcore/array.rs
src/libcore/cell.rs
src/libcore/prelude.rs
src/libstd/path/posix.rs
src/libstd/prelude/v1.rs
src/test/compile-fail/dst-sized-trait-param.rs
|
|
Conflicts:
src/libcollections/lib.rs
src/librustc/lib.rs
src/libserialize/lib.rs
src/libstd/lib.rs
|
|
There's been some debate over the precise form that these APIs should take, and
they've undergone some changes recently, so these APIs are going to be left
unstable for now to be fleshed out during the next release cycle.
|
|
This is a manual merge of #20627 and #20634 to avoid conflicts in rollup and also avoid one roundtrip. I've leave copyright to original author. If this one is moved to rollup original PR could be closed. cc @mneumann
@alexcrichton r?
Both FreeBSD and DragonFly define pthread_key_t as int, while Linux
defines it as uint. As pthread_key_t is used as an opaque type and
storage size of both int and uint are the same, this is rather a
cosmetic change.
iOS uses ulong (as OS X) so difference is critical on 64bit platforms.
|
|
This commit is a first past stabilization of `std::error`:
* The module is stable.
* The `FromError` trait and impls are stable
* The `Error` trait itself is left unstable, pending current APIs and
possible revisions during the alpha cycle.
|
|
This calculates the width and height using the bounding box of the window in the buffer. Bounding box coordinates are inclusive so I have to add 1 to both dimensions.
|
|
Prevents breaking down `$name` tokens into separate `$` and `name`.
Reports unknown macro variables.
Fixes #18775
Fixes #18839
Fixes #15640
|
|
Conflicts:
src/librbml/lib.rs
src/libserialize/json_stage0.rs
src/libserialize/serialize_stage0.rs
src/libsyntax/ast.rs
src/libsyntax/ext/deriving/generic/mod.rs
src/libsyntax/parse/token.rs
|
|
Conflicts:
src/compiletest/runtest.rs
src/libcore/fmt/mod.rs
src/libfmt_macros/lib.rs
src/libregex/parse.rs
src/librustc/middle/cfg/construct.rs
src/librustc/middle/dataflow.rs
src/librustc/middle/infer/higher_ranked/mod.rs
src/librustc/middle/ty.rs
src/librustc_back/archive.rs
src/librustc_borrowck/borrowck/fragments.rs
src/librustc_borrowck/borrowck/gather_loans/mod.rs
src/librustc_resolve/lib.rs
src/librustc_trans/back/link.rs
src/librustc_trans/save/mod.rs
src/librustc_trans/trans/base.rs
src/librustc_trans/trans/callee.rs
src/librustc_trans/trans/common.rs
src/librustc_trans/trans/consts.rs
src/librustc_trans/trans/controlflow.rs
src/librustc_trans/trans/debuginfo.rs
src/librustc_trans/trans/expr.rs
src/librustc_trans/trans/monomorphize.rs
src/librustc_typeck/astconv.rs
src/librustc_typeck/check/method/mod.rs
src/librustc_typeck/check/mod.rs
src/librustc_typeck/check/regionck.rs
src/librustc_typeck/collect.rs
src/libsyntax/ext/format.rs
src/libsyntax/ext/source_util.rs
src/libsyntax/ext/tt/transcribe.rs
src/libsyntax/parse/mod.rs
src/libsyntax/parse/token.rs
src/test/run-pass/issue-8898.rs
|
|
|
|
|
|
|
|
|
|
fmt::Show is for debugging, and can and should be implemented for
all public types. This trait is used with `{:?}` syntax. There still
exists #[derive(Show)].
fmt::String is for types that faithfully be represented as a String.
Because of this, there is no way to derive fmt::String, all
implementations must be purposeful. It is used by the default format
syntax, `{}`.
This will break most instances of `{}`, since that now requires the type
to impl fmt::String. In most cases, replacing `{}` with `{:?}` is the
correct fix. Types that were being printed specifically for users should
receive a fmt::String implementation to fix this.
Part of #20013
[breaking-change]
|
|
`#[old_impl_check]`.
|
