| Age | Commit message (Collapse) | Author | Lines |
|---|
|
This commit makes several changes to the stability index infrastructure:
* Stability levels are now inherited lexically, i.e., each item's
stability level becomes the default for any nested items.
* The computed stability level for an item is stored as part of the
metadata. When using an item from an external crate, this data is
looked up and cached.
* The stability lint works from the computed stability level, rather
than manual stability attribute annotations. However, the lint still
checks only a limited set of item uses (e.g., it does not check every
component of a path on import). This will be addressed in a later PR,
as part of issue #8962.
* The stability lint only applies to items originating from external
crates, since the stability index is intended as a promise to
downstream crates.
* The "experimental" lint is now _allow_ by default. This is because
almost all existing crates have been marked "experimental", pending
library stabilization. With inheritance in place, this would generate
a massive explosion of warnings for every Rust program.
The lint should be changed back to deny-by-default after library
stabilization is complete.
* The "deprecated" lint still warns by default.
The net result: we can begin tracking stability index for the standard
libraries as we stabilize, without impacting most clients.
Closes #13540.
|
|
Closes #14329
|
|
This removes all remnants of `@` pointers from rustc. Additionally, this removes
the `GC` structure from the prelude as it seems odd exporting an experimental
type in the prelude by default.
Closes #14193
[breaking-change]
|
|
|
|
|
|
|
|
|
|
This is part of the ongoing renaming of the equality traits. See #12517 for more
details. All code using Eq/Ord will temporarily need to move to Partial{Eq,Ord}
or the Total{Eq,Ord} traits. The Total traits will soon be renamed to {Eq,Ord}.
cc #12517
[breaking-change]
|
|
|
|
There's a fair number of attributes that have to be whitelisted since
they're either looked for by rustdoc, in trans, or as needed. These can
be cleaned up in the future.
|
|
|
|
Enough attributes are marked to cleanly compile an empty library.
|
|
|
|
|
|
|
|
|
|
The #[phase(syntax,link)] attribute on `extern crate std` needs to be an
outer attribute so it can pretty-print properly.
Also add `#![no_std]` and `#[feature(phase)]` so compiling the
pretty-printed source will work.
|
|
|
|
provided (everywhere but treemap)
This commit deprecates rev_iter, mut_rev_iter, move_rev_iter everywhere (except treemap) and also
deprecates related functions like rsplit, rev_components, and rev_str_components. In every case,
these functions can be replaced with the non-reversed form followed by a call to .rev(). To make this
more concrete, a translation table for all functional changes necessary follows:
* container.rev_iter() -> container.iter().rev()
* container.mut_rev_iter() -> container.mut_iter().rev()
* container.move_rev_iter() -> container.move_iter().rev()
* sliceorstr.rsplit(sep) -> sliceorstr.split(sep).rev()
* path.rev_components() -> path.components().rev()
* path.rev_str_components() -> path.str_components().rev()
In terms of the type system, this change also deprecates any specialized reversed iterator types (except
in treemap), opting instead to use Rev directly if any type annotations are needed. However, since
methods directly returning reversed iterators are now discouraged, the need for such annotations should
be small. However, in those cases, the general pattern for conversion is to take whatever follows Rev in
the original reversed name and surround it with Rev<>:
* RevComponents<'a> -> Rev<Components<'a>>
* RevStrComponents<'a> -> Rev<StrComponents<'a>>
* RevItems<'a, T> -> Rev<Items<'a, T>>
* etc.
The reasoning behind this change is that it makes the standard API much simpler without reducing readability,
performance, or power. The presence of functions such as rev_iter adds more boilerplate code to libraries
(all of which simply call .iter().rev()), clutters up the documentation, and only helps code by saving two
characters. Additionally, the numerous type synonyms that were used to make the type signatures look nice
like RevItems add even more boilerplate and clutter up the docs even more. With this change, all that cruft
goes away.
[breaking-change]
|
|
|
|
It's now in the prelude.
|
|
Closes #12771
|
|
|
|
Previously, the cfg attribute `cfg(not(a, b))` was translated to `(!a && !b)`,
but this isn't very useful because that can already be expressed as
`cfg(not(a), not(b))`. This commit changes the translation to `!(a && b)` which
is more symmetrical of the rest of the `cfg` attribute.
Put another way, I would expect `cfg(clause)` to be the opposite of
`cfg(not(clause))`, but this is not currently the case with multiple element
clauses.
|
|
|
|
|
|
Formatting via reflection has been a little questionable for some time now, and
it's a little unfortunate that one of the standard macros will silently use
reflection when you weren't expecting it. This adds small bits of code bloat to
libraries, as well as not always being necessary. In light of this information,
this commit switches assert_eq!() to using {} in the error message instead of
{:?}.
In updating existing code, there were a few error cases that I encountered:
* It's impossible to define Show for [T, ..N]. I think DST will alleviate this
because we can define Show for [T].
* A few types here and there just needed a #[deriving(Show)]
* Type parameters needed a Show bound, I often moved this to `assert!(a == b)`
* `Path` doesn't implement `Show`, so assert_eq!() cannot be used on two paths.
I don't think this is much of a regression though because {:?} on paths looks
awful (it's a byte array).
Concretely speaking, this shaved 10K off a 656K binary. Not a lot, but sometime
significant for smaller binaries.
|
|
This commit changes the ToStr trait to:
impl<T: fmt::Show> ToStr for T {
fn to_str(&self) -> ~str { format!("{}", *self) }
}
The ToStr trait has been on the chopping block for quite awhile now, and this is
the final nail in its coffin. The trait and the corresponding method are not
being removed as part of this commit, but rather any implementations of the
`ToStr` trait are being forbidden because of the generic impl. The new way to
get the `to_str()` method to work is to implement `fmt::Show`.
Formatting into a `&mut Writer` (as `format!` does) is much more efficient than
`ToStr` when building up large strings. The `ToStr` trait forces many
intermediate allocations to be made while the `fmt::Show` trait allows
incremental buildup in the same heap allocated buffer. Additionally, the
`fmt::Show` trait is much more extensible in terms of interoperation with other
`Writer` instances and in more situations. By design the `ToStr` trait requires
at least one allocation whereas the `fmt::Show` trait does not require any
allocations.
Closes #8242
Closes #9806
|
|
These two containers are indeed collections, so their place is in
libcollections, not in libstd. There will always be a hash map as part of the
standard distribution of Rust, but by moving it out of the standard library it
makes libstd that much more portable to more platforms and environments.
This conveniently also removes the stuttering of 'std::hashmap::HashMap',
although 'collections::HashMap' is only one character shorter.
|
|
|
|
compiler and use it for attributes
|
|
|
|
|
|
This removes trait `handler` and `span_handler`,
and renames `HandlerT` to `Handler`, `CodemapT` to `SpanHandler`.
|
|
|
|
|
|
(implicitly) less_eq.
|
|
This moves the custom sorting to `.sort_by`.
|
|
Fixes #9676.
|
|
Closes #11035
|
|
This replaces the link meta attributes with a pkgid attribute and uses a hash
of this as the crate hash. This makes the crate hash computable by things
other than the Rust compiler. It also switches the hash function ot SHA1 since
that is much more likely to be available in shell, Python, etc than SipHash.
Fixes #10188, #8523.
|
|
|
|
|
|
|
|
|
|
Also export enum attrs into metadata, and add a convenient interface for
obtaining the repr hint from either a local or remote definition.
|
|
Who doesn't like a massive renaming?
|
|
|
|
For the benefit of the pretty printer we want to keep track of how
string literals in the ast were originally represented in the source
code.
This commit changes parser functions so they don't extract strings from
the token stream without at least also returning what style of string
literal it was. This is stored in the resulting ast node for string
literals, obviously, for the package id in `extern mod = r"package id"`
view items, for the inline asm in `asm!()` invocations.
For `asm!()`'s other arguments or for `extern "Rust" fn()` items, I just
the style of string, because it seemed disproportionally cumbersome to
thread that information through the string processing that happens with
those string literals, given the limited advantage raw string literals
would provide in these positions.
The other syntax extensions don't seem to store passed string literals
in the ast, so they also discard the style of strings they parse.
|
|
Closes #9467
|
