| Age | Commit message (Collapse) | Author | Lines |
|---|
|
|
|
This still expectedly fails for musl targets with +crt-static.
|
|
This reverts commit bd94bf5738c7a0fd148157831eabd1efede3b309.
|
|
|
|
Fixes #50711
|
|
Use the correct crt*.o files when linking musl targets.
This is supposed to support optionally using the system copy of musl
libc instead of the included one if supported. This currently only
affects the start files, which is enough to allow building rustc on musl
targets.
Most of the changes are analogous to crt-static.
Excluding the start files is something musl based distributions usually patch into their copy of rustc:
- https://github.com/alpinelinux/aports/blob/eb064c8/community/rust/musl-fix-linux_musl_base.patch
- https://github.com/voidlinux/void-packages/blob/77400fc/srcpkgs/rust/patches/link-musl-dynamically.patch
For third-party distributions that not yet carry those patches it would be nice if it was supported without the need to patch upstream sources.
## Reasons
### What breaks?
Some start files were missed when originally writing the logic to swap in musl start files (gcc comes with its own start files, which are suppressed by -nostdlib, but not manually included later on). This caused #36710, which also affects rustc with the internal llvm copy or any other system libraries that need crtbegin/crtend.
### How is it fixed?
The system linker already has all the logic to decide which start files to include, so we can just defer to it (except of course if it doesn't target musl).
### Why is it optional?
In #40113 it was first tried to remove the start files, which broke compiling musl-targeting static binaries with a glibc-targeting compiler. This is why it eventually landed without removing the start files. Being an option side-steps the issue.
### Why are the start files still installed?
This has the nice side-effect, that the produced rust-std-* binaries can still be used by on a glibc-targeting system with a rustc built against glibc.
## Does it work?
With the following build script (using [musl-cross-make](https://github.com/richfelker/musl-cross-make)): https://shadowice.org/~mixi/rust-musl/build.sh, I was able to cross-compile a musl-host musl-targeting rustc on a glibc-based system. The resulting binaries are at https://shadowice.org/~mixi/rust-musl/binaries/. This also requires #50103 and #50104 (which are also applied to the branch the build script uses).
|
|
|
|
Various edition preview fixes
Implement a bunch of things discussed in the meeting.
|
|
|
|
|
|
|
|
Fix save-analysis generation with extern_in_paths/extern_absolute_paths
Fixes #48742.
|
|
Injected crates don't have extern info. Let's skip them.
|
|
|
|
|
|
|
|
r=michaelwoerister
Fix another circular deps link args issue
It turns out that the support in #49316 wasn't enough to handle all cases
notably the example in #48661. The underlying bug was connected to panic=abort
where lang items were listed in the `missing_lang_items` sets but didn't
actually exist anywhere.
This caused the linker backend to deduce that start-group/end-group wasn't
needed because not all items were defined. Instead the missing lang items that
don't actually need to have a definition are filtered out and not considered for
the start-group/end-group arguments
Closes #48661
|
|
|
|
Take the original extra-filename passed to a crate into account when resolving it as a dependency
resolving it as a dependency.
Fixes #46816
|
|
It turns out that the support in #49316 wasn't enough to handle all cases
notably the example in #48661. The underlying bug was connected to panic=abort
where lang items were listed in the `missing_lang_items` sets but didn't
actually exist anywhere.
This caused the linker backend to deduce that start-group/end-group wasn't
needed because not all items were defined. Instead the missing lang items that
don't actually need to have a definition are filtered out and not considered for
the start-group/end-group arguments
Closes #48661
|
|
Better document the implementors of Clone and Copy
There are two parts to this change. The first part is a change to the compiler and to the standard library (specifically, libcore) to allow implementations of `Clone` and `Copy` to be written for a subset of builtin types. By adding these implementations to libcore, they now show up in the documentation. This is a [breaking-change] for users of `#![no_core]`, because they will now have to supply their own copy of the implementations of `Clone` and `Copy` that were added in libcore.
The second part is purely a documentation change to document the other implementors of `Clone` and `Copy` that cannot be described in Rust code (yet) and are thus provided by the compiler.
Fixes #25893
|
|
This commit fixes a longstanding issue with the compiler with circular
dependencies between libcore and libstd. The `core` crate requires at least one
symbol, the ability to unwind. The `std` crate is the crate which actually
defines this symbol, but the `std` crate also depends on the `core` crate.
This circular dependency is in general disallowed in Rust as crates cannot have
cycles amongst them. A special exception is made just for core/std, but this is
also unfortunately incompatible with how GNU linkers work. GNU linkers will
process undefined symbols in a left-to-right fashion, only actually linking an
rlib like libstd if there are any symbols used from it. This strategy is
incompatible with circular dependencies because if we otherwise don't use
symbols from libstd we don't discover that we needed it until we're later
processing libcore's symbols!
To fix this GNU linkers support the `--start-group` and `--end-group` options
which indicate "libraries between these markers may have circular dependencies
amongst them. The linker invocation has been updated to automatically pass these
arguments when we're invoking a GNU linker and automatically calculate where the
arguments need to go (around libstd and libcore)
Closes #18807
Closes #47074
|
|
|
|
Add implementations of `Clone` and `Copy` for some primitive types to
libcore so that they show up in the documentation. The concerned types
are the following:
* All primitive signed and unsigned integer types (`usize`, `u8`, `u16`,
`u32`, `u64`, `u128`, `isize`, `i8`, `i16`, `i32`, `i64`, `i128`);
* All primitive floating point types (`f32`, `f64`)
* `bool`
* `char`
* `!`
* Raw pointers (`*const T` and `*mut T`)
* Shared references (`&'a T`)
These types already implemented `Clone` and `Copy`, but the
implementation was provided by the compiler. The compiler no longer
provides these implementations and instead tries to look them up as
normal trait implementations. The goal of this change is to make the
implementations appear in the generated documentation.
For `Copy` specifically, the compiler would reject an attempt to write
an `impl` for the primitive types listed above with error `E0206`; this
error no longer occurs for these types, but it will still occur for the
other types that used to raise that error.
The trait implementations are guarded with `#[cfg(not(stage0))]` because
they are invalid according to the stage0 compiler. When the stage0
compiler is updated to a revision that includes this change, the
attribute will have to be removed, otherwise the stage0 build will fail
because the types mentioned above no longer implement `Clone` or `Copy`.
For type variants that are variadic, such as tuples and function
pointers, and for array types, the `Clone` and `Copy` implementations
are still provided by the compiler, because the language is not
expressive enough yet to be able to write the appropriate
implementations in Rust.
The initial plan was to add `impl` blocks guarded by `#[cfg(dox)]` to
make them apply only when generating documentation, without having to
touch the compiler. However, rustdoc's usage of the compiler still
rejected those `impl` blocks.
This is a [breaking-change] for users of `#![no_core]`, because they
will now have to supply their own implementations of `Clone` and `Copy`
for the primitive types listed above. The easiest way to do that is to
simply copy the implementations from `src/libcore/clone.rs` and
`src/libcore/marker.rs`.
Fixes #25893
|
|
the tmp directory properly.
|
|
This commit is an implementation of adding custom sections to wasm artifacts in
rustc. The intention here is to expose the ability of the wasm binary format to
contain custom sections with arbitrary user-defined data. Currently neither our
version of LLVM nor LLD supports this so the implementation is currently custom
to rustc itself.
The implementation here is to attach a `#[wasm_custom_section = "foo"]`
attribute to any `const` which has a type like `[u8; N]`. Other types of
constants aren't supported yet but may be added one day! This should hopefully
be enough to get off the ground with *some* custom section support.
The current semantics are that any constant tagged with `#[wasm_custom_section]`
section will be *appended* to the corresponding section in the final output wasm
artifact (and this affects dependencies linked in as well, not just the final
crate). This means that whatever is interpreting the contents must be able to
interpret binary-concatenated sections (or each constant needs to be in its own
custom section).
To test this change the existing `run-make` test suite was moved to a
`run-make-fulldeps` folder and a new `run-make` test suite was added which
applies to all targets by default. This test suite currently only has one test
which only runs for the wasm target (using a node.js script to use `WebAssembly`
in JS to parse the wasm output).
|
