| Age | Commit message (Collapse) | Author | Lines |
|---|
|
This effectively reverts https://github.com/rust-lang/rust/pull/97684 for CTFE
|
|
|
|
|
|
|
|
Move some tests to more reasonable directories
r? ```@petrochenkov```
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
use precise spans for recursive const evaluation
This fixes https://github.com/rust-lang/rust/issues/73283 by using a `TyCtxtAt` with a more precise span when the interpreter recursively calls itself. Hopefully such calls are sufficiently rare that this does not cost us too much performance.
(In theory, cycles can also arise through layout computation, as layout can depend on consts -- but layout computation happens all the time so we'd have to do something to not make this terrible for performance.)
|
|
|
|
Remove migrate borrowck mode
Closes #58781
Closes #43234
# Stabilization proposal
This PR proposes the stabilization of `#![feature(nll)]` and the removal of `-Z borrowck`. Current borrow checking behavior of item bodies is currently done by first infering regions *lexically* and reporting any errors during HIR type checking. If there *are* any errors, then MIR borrowck (NLL) never occurs. If there *aren't* any errors, then MIR borrowck happens and any errors there would be reported. This PR removes the lexical region check of item bodies entirely and only uses MIR borrowck. Because MIR borrowck could never *not* be run for a compiled program, this should not break any programs. It does, however, change diagnostics significantly and allows a slightly larger set of programs to compile.
Tracking issue: #43234
RFC: https://github.com/rust-lang/rfcs/blob/master/text/2094-nll.md
Version: 1.63 (2022-06-30 => beta, 2022-08-11 => stable).
## Motivation
Over time, the Rust borrow checker has become "smarter" and thus allowed more programs to compile. There have been three different implementations: AST borrowck, MIR borrowck, and polonius (well, in progress). Additionally, there is the "lexical region resolver", which (roughly) solves the constraints generated through HIR typeck. It is not a full borrow checker, but does emit some errors.
The AST borrowck was the original implementation of the borrow checker and was part of the initially stabilized Rust 1.0. In mid 2017, work began to implement the current MIR borrow checker and that effort ompleted by the end of 2017, for the most part. During 2018, efforts were made to migrate away from the AST borrow checker to the MIR borrow checker - eventually culminating into "migrate" mode - where HIR typeck with lexical region resolving following by MIR borrow checking - being active by default in the 2018 edition.
In early 2019, migrate mode was turned on by default in the 2015 edition as well, but with MIR borrowck errors emitted as warnings. By late 2019, these warnings were upgraded to full errors. This was followed by the complete removal of the AST borrow checker.
In the period since, various errors emitted by the MIR borrow checker have been improved to the point that they are mostly the same or better than those emitted by the lexical region resolver.
While there do remain some degradations in errors (tracked under the [NLL-diagnostics tag](https://github.com/rust-lang/rust/issues?q=is%3Aopen+is%3Aissue+label%3ANLL-diagnostics), those are sufficiently small and rare enough that increased flexibility of MIR borrow check-only is now a worthwhile tradeoff.
## What is stabilized
As said previously, this does not fundamentally change the landscape of accepted programs. However, there are a [few](https://github.com/rust-lang/rust/issues?q=is%3Aopen+is%3Aissue+label%3ANLL-fixed-by-NLL) cases where programs can compile under `feature(nll)`, but not otherwise.
There are two notable patterns that are "fixed" by this stabilization. First, the `scoped_threads` feature, which is a continutation of a pre-1.0 API, can sometimes emit a [weird lifetime error](https://github.com/rust-lang/rust/issues/95527) without NLL. Second, actually seen in the standard library. In the `Extend` impl for `HashMap`, there is an implied bound of `K: 'a` that is available with NLL on but not without - this is utilized in the impl.
As mentioned before, there are a large number of diagnostic differences. Most of them are better, but some are worse. None are serious or happen often enough to need to block this PR. The biggest change is the loss of error code for a number of lifetime errors in favor of more general "lifetime may not live long enough" error. While this may *seem* bad, the former error codes were just attempts to somewhat-arbitrarily bin together lifetime errors of the same type; however, on paper, they end up being roughly the same with roughly the same kinds of solutions.
## What isn't stabilized
This PR does not completely remove the lexical region resolver. In the future, it may be possible to remove that (while still keeping HIR typeck) or to remove it together with HIR typeck.
## Tests
Many test outputs get updated by this PR. However, there are number of tests specifically geared towards NLL under `src/test/ui/nll`
## History
* On 2017-07-14, [tracking issue opened](https://github.com/rust-lang/rust/issues/43234)
* On 2017-07-20, [initial empty MIR pass added](https://github.com/rust-lang/rust/pull/43271)
* On 2017-08-29, [RFC opened](https://github.com/rust-lang/rfcs/pull/2094)
* On 2017-11-16, [Integrate MIR type-checker with NLL](https://github.com/rust-lang/rust/pull/45825)
* On 2017-12-20, [NLL feature complete](https://github.com/rust-lang/rust/pull/46862)
* On 2018-07-07, [Don't run AST borrowck on mir mode](https://github.com/rust-lang/rust/pull/52083)
* On 2018-07-27, [Add migrate mode](https://github.com/rust-lang/rust/pull/52681)
* On 2019-04-22, [Enable migrate mode on 2015 edition](https://github.com/rust-lang/rust/pull/59114)
* On 2019-08-26, [Don't downgrade errors on 2015 edition](https://github.com/rust-lang/rust/pull/64221)
* On 2019-08-27, [Remove AST borrowck](https://github.com/rust-lang/rust/pull/64790)
|
|
interpret: better control over whether we read data with provenance
The resolution in https://github.com/rust-lang/unsafe-code-guidelines/issues/286 seems to be that when we load data at integer type, we implicitly strip provenance. So let's implement that in Miri at least for scalar loads. This makes use of the fact that `Scalar` layouts distinguish pointer-sized integers and pointers -- so I was expecting some wild bugs where layouts set this incorrectly, but so far that does not seem to happen.
This does not entirely implement the solution to https://github.com/rust-lang/unsafe-code-guidelines/issues/286; we still do the wrong thing for integers in larger types: we will `copy_op` them and then do validation, and validation will complain about the provenance. To fix that we need mutating validation; validation needs to strip the provenance rather than complaining about it. This is a larger undertaking (but will also help resolve https://github.com/rust-lang/miri/issues/845 since we can reset padding to `Uninit`).
The reason this is useful is that we can now implement `addr` as a `transmute` from a pointer to an integer, and actually get the desired behavior of stripping provenance without exposing it!
|
|
implicit provenance stripping where possible
|
|
|
|
|
|
rewrite error handling for unresolved inference vars
Pretty much completely rewrites `fn emit_inference_failure_err`.
This new setup should hopefully be easier to extend and is already a lot better when looking for generic arguments.
Because this is a rewrite there are still some parts which are lacking, these are tracked in #94483 and will be fixed in later PRs.
r? `@estebank` `@petrochenkov`
|
|
|
|
|
|
|
|
eval can avoid running at all
|
|
|
|
Implement proper stability check for const impl Trait, fall back to unstable const when undeclared
Continuation of #93960
`@jhpratt` it looks to me like the test was simply not testing for the failure you were looking for? Your checks actually do the right thing for const traits?
|
|
TaKO8Ki:fix-misleading-cannot-infer-type-for-type-parameter-error, r=oli-obk
Fix misleading `cannot infer type for type parameter` error
closes #93198
|
|
fix ci error
emit err for `impl_item`
|
|
|
|
non-ptr
|
|
Rather than deferring to const eval for checking if a trait is const, we
now check up-front. This allows the error to be emitted earlier, notably
at the same time as other stability checks.
Also included in this commit is a change of the default const stability
level to UNstable. Previously, an item that was `const` but did not
explicitly state it was unstable was implicitly stable.
|
|
interpret/validity: reject references to uninhabited types
According to https://doc.rust-lang.org/reference/behavior-considered-undefined.html, this is definitely UB. And we can check this without actually looking up anything in memory, we just need the reference value and its type, making this a great candidate for a validity invariant IMO and my favorite resolution of https://github.com/rust-lang/unsafe-code-guidelines/issues/77.
With this PR, Miri with `-Zmiri-check-number-validity` implements all my preferred options for what the validity invariants of our types could be. :)
CTFE has been doing recursive checking anyway, so this is backwards compatible but might change the error output. I will submit a PR with the new Miri tests soon.
r? `@oli-obk`
|
|
|
|
|
|
|
|
It now uses the type of context. (issue 97082)
|
|
Initial work on Miri permissive-exposed-provenance
Rustc portion of the changes for portions of a permissive ptr-to-int model for Miri. The main changes here are changing `ptr_get_alloc` and `get_alloc_id` to return an Option, and also making ptr-to-int casts have an expose side effect.
|
|
|
|
Add `sub_ptr` on pointers (the `usize` version of `offset_from`)
We have `add`/`sub` which are the `usize` versions of `offset`, this adds the `usize` equivalent of `offset_from`. Like how `.add(d)` replaced a whole bunch of `.offset(d as isize)`, you can see from the changes here that it's fairly common that code actually knows the order between the pointers and *wants* a `usize`, not an `isize`.
As a bonus, this can do `sub nuw`+`udiv exact`, rather than `sub`+`sdiv exact`, which can be optimized slightly better because it doesn't have to worry about negatives. That's why the slice iterators weren't using `offset_from`, though I haven't updated that code in this PR because slices are so perf-critical that I'll do it as its own change.
This is an intrinsic, like `offset_from`, so that it can eventually be allowed in CTFE. It also allows checking the extra safety condition -- see the test confirming that CTFE catches it if you pass the pointers in the wrong order.
|
|
|
|
|
|
Like we have `add`/`sub` which are the `usize` version of `offset`, this adds the `usize` equivalent of `offset_from`. Like how `.add(d)` replaced a whole bunch of `.offset(d as isize)`, you can see from the changes here that it's fairly common that code actually knows the order between the pointers and *wants* a `usize`, not an `isize`.
As a bonus, this can do `sub nuw`+`udiv exact`, rather than `sub`+`sdiv exact`, which can be optimized slightly better because it doesn't have to worry about negatives. That's why the slice iterators weren't using `offset_from`, though I haven't updated that code in this PR because slices are so perf-critical that I'll do it as its own change.
This is an intrinsic, like `offset_from`, so that it can eventually be allowed in CTFE. It also allows checking the extra safety condition -- see the test confirming that CTFE catches it if you pass the pointers in the wrong order.
|
|
Implement a lint to warn about unused macro rules
This implements a new lint to warn about unused macro rules (arms/matchers), similar to the `unused_macros` lint added by #41907 that warns about entire macros.
```rust
macro_rules! unused_empty {
(hello) => { println!("Hello, world!") };
() => { println!("empty") }; //~ ERROR: 1st rule of macro `unused_empty` is never used
}
fn main() {
unused_empty!(hello);
}
```
Builds upon #96149 and #96156.
Fixes #73576
|
|
|
|
Overhaul `MacArgs`
Motivation:
- Clarify some code that I found hard to understand.
- Eliminate one use of three places where `TokenKind::Interpolated` values are created.
r? `@petrochenkov`
|
|
The value in `MacArgs::Eq` is currently represented as a `Token`.
Because of `TokenKind::Interpolated`, `Token` can be either a token or
an arbitrary AST fragment. In practice, a `MacArgs::Eq` starts out as a
literal or macro call AST fragment, and then is later lowered to a
literal token. But this is very non-obvious. `Token` is a much more
general type than what is needed.
This commit restricts things, by introducing a new type `MacArgsEqKind`
that is either an AST expression (pre-lowering) or an AST literal
(post-lowering). The downside is that the code is a bit more verbose in
a few places. The benefit is that makes it much clearer what the
possibilities are (though also shorter in some other places). Also, it
removes one use of `TokenKind::Interpolated`, taking us a step closer to
removing that variant, which will let us make `Token` impl `Copy` and
remove many "handle Interpolated" code paths in the parser.
Things to note:
- Error messages have improved. Messages like this:
```
unexpected token: `"bug" + "found"`
```
now say "unexpected expression", which makes more sense. Although
arbitrary expressions can exist within tokens thanks to
`TokenKind::Interpolated`, that's not obvious to anyone who doesn't
know compiler internals.
- In `parse_mac_args_common`, we no longer need to collect tokens for
the value expression.
|
|
To limit the fallout from this, don't do this for the last (or only) operand in an rvalue.
|
|
|
|
Note this does not produce a full stack all the way to the first call that specifies all monomorphic parameters, it's just shallowly mentioning the last call site.
|
|
|
