| Age | Commit message (Collapse) | Author | Lines |
|---|
|
More precise spans for HIR paths
`Ty::assoc_item` is lowered to `<Ty>::assoc_item` in HIR, but `Ty` got span from the whole path.
This PR fixes that, and adjusts some diagnostic code that relied on `Ty` having the whole path span.
This is a pre-requisite for https://github.com/rust-lang/rust/pull/82868 (we cannot report suggestions like `Tr::assoc` -> `<dyn Tr>::assoc` with the current imprecise spans).
r? ````@estebank````
|
|
Adjust `-Ctarget-cpu=native` handling in cg_llvm
When cg_llvm encounters the `-Ctarget-cpu=native` it computes an
explciit set of features that applies to the target in order to
correctly compile code for the host CPU (because e.g. `skylake` alone is
not sufficient to tell if some of the instructions are available or
not).
However there were a couple of issues with how we did this. Firstly, the
order in which features were overriden wasn't quite right – conceptually
you'd expect `-Ctarget-cpu=native` option to override the features that
are implicitly set by the target definition. However due to how other
`-Ctarget-cpu` values are handled we must adopt the following order
of priority:
* Features from -Ctarget-cpu=*; are overriden by
* Features implied by --target; are overriden by
* Features from -Ctarget-feature; are overriden by
* function specific features.
Another problem was in that the function level `target-features`
attribute would overwrite the entire set of the globally enabled
features, rather than just the features the
`#[target_feature(enable/disable)]` specified. With something like
`-Ctarget-cpu=native` we'd end up in a situation wherein a function
without `#[target_feature(enable)]` annotation would have a broader
set of features compared to a function with one such attribute. This
turned out to be a cause of heavy run-time regressions in some code
using these function-level attributes in conjunction with
`-Ctarget-cpu=native`, for example.
With this PR rustc is more careful about specifying the entire set of
features for functions that use `#[target_feature(enable/disable)]` or
`#[instruction_set]` attributes.
Sadly testing the original reproducer for this behaviour is quite
impossible – we cannot rely on `-Ctarget-cpu=native` to be anything in
particular on developer or CI machines.
cc https://github.com/rust-lang/rust/issues/83027 `@BurntSushi`
|
|
|
|
|
|
async-pub check created a regression for default
|
|
|
|
Redirects `const? async? unsafe? pub` to `pub const? async? unsafe?`.
Fix #76437
|
|
|
|
|
|
|
|
Previously, there was no way to add a custom tool prefix, even if the tool
itself had registered a lint:
```
#![feature(register_tool)]
#![register_tool(xyz)]
#![warn(xyz::my_lint)]
```
```
$ rustc unknown-lint.rs --crate-type lib
error[E0710]: an unknown tool name found in scoped lint: `xyz::my_lint`
--> unknown-lint.rs:3:9
|
3 | #![warn(xyz::my_lint)]
| ^^^
```
This allows opting-in to lints from other tools using `register_tool`.
|
|
When cg_llvm encounters the `-Ctarget-cpu=native` it computes an
explciit set of features that applies to the target in order to
correctly compile code for the host CPU (because e.g. `skylake` alone is
not sufficient to tell if some of the instructions are available or
not).
However there were a couple of issues with how we did this. Firstly, the
order in which features were overriden wasn't quite right – conceptually
you'd expect `-Ctarget-cpu=native` option to override the features that
are implicitly set by the target definition. However due to how other
`-Ctarget-cpu` values are handled we must adopt the following order
of priority:
* Features from -Ctarget-cpu=*; are overriden by
* Features implied by --target; are overriden by
* Features from -Ctarget-feature; are overriden by
* function specific features.
Another problem was in that the function level `target-features`
attribute would overwrite the entire set of the globally enabled
features, rather than just the features the
`#[target_feature(enable/disable)]` specified. With something like
`-Ctarget-cpu=native` we'd end up in a situation wherein a function
without `#[target_feature(enable)]` annotation would have a broader
set of features compared to a function with one such attribute. This
turned out to be a cause of heavy run-time regressions in some code
using these function-level attributes in conjunction with
`-Ctarget-cpu=native`, for example.
With this PR rustc is more careful about specifying the entire set of
features for functions that use `#[target_feature(enable/disable)]` or
`#[instruction_set]` attributes.
Sadly testing the original reproducer for this behaviour is quite
impossible – we cannot rely on `-Ctarget-cpu=native` to be anything in
particular on developer or CI machines.
|
|
2229: Handle patterns within closures correctly when `capture_disjoint_fields` is enabled
This PR fixes several issues related to handling patterns within closures when `capture_disjoint_fields` is enabled.
1. Matching is always considered a use of the place, even with `_` patterns
2. Compiler ICE when capturing fields in closures through `let` assignments
To do so, we
- Introduced new Fake Reads
- Delayed use of `Place` in favor of `PlaceBuilder`
- Ensured that `PlaceBuilder` can be resolved before attempting to extract `Place` in any of the pattern matching code
Closes rust-lang/project-rfc-2229/issues/27
Closes rust-lang/project-rfc-2229/issues/24
r? `@nikomatsakis`
|
|
Right now, rustdoc users have an unpleasant situation: they can either
use the new tool lint names (`rustdoc::non_autolinks`) or they can use
the old names (`non_autolinks`). If they use the tool lints, they get a
hard error on stable compilers, because rustc rejects all tool names it
doesn't recognize. If they use the old name, they get a warning to
rename the lint to the new name. The only way to compile without
warnings is to add `#[allow(renamed_removed_lints)]`, which defeats the
whole point of the change: we *want* people to switch to the new name.
To avoid people silencing the lint and never migrating to the tool lint,
this avoids warning about the old name, while still allowing you to use
the new name. Once the new `rustdoc` tool name makes it to the stable
channel, we can change these lints to warn again.
This adds the new lint functions `register_alias` and `register_ignored`
- I didn't see an existing way to do this.
|
|
Use delay_span_bug instead of panic in layout_scalar_valid_range
#83054 introduced validation of scalar range attributes, but panicking
code that uses the attribute remained reachable. Use `delay_span_bug`
instead to avoid the ICE.
Fixes #83180.
|
|
Allow rustdoc to handle asm! of foreign architectures
This allows rustdoc to process code containing `asm!` for architectures other than the current one. Since this never reaches codegen, we just replace target-specific registers and register classes with a dummy one.
Fixes #82869
|
|
|
|
Add a `min_type_alias_impl_trait` feature gate
This new feature gate only permits type alias impl trait to be constrained by function and trait method return types. All other possible constraining sites like const/static types, closure return types and binding types are now forbidden and gated under the `type_alias_impl_trait` and `impl_trait_in_bindings` feature gates (which are both marked as incomplete, as they have various ways to ICE the compiler or cause query cycles where they shouldn't).
r? `@nikomatsakis`
This is best reviewed commit-by-commit
|
|
|
|
|
|
83054 introduced validation of scalar range attributes, but panicking
code that uses the attribute remained reachable. Use `delay_span_bug`
instead to avoid the ICE.
|
|
|
|
|
|
We now lint on *any* use of `procedural-masquerade` crate. While this
crate still exists, its main reverse dependency (`cssparser`) no longer
depends on it. Any crates still depending off should stop doing so, as
it only exists to support very old Rust versions.
If a crate actually needs to support old versions of rustc via
`procedural-masquerade`, then they'll just need to accept the warning
until we remove it entirely (at the same time as the back-compat hack).
The latest version of `procedural-masquerade` does not work with the
latest rustc, but trying to check for the version seems like more
trouble than it's worth.
While working on this, I realized that the `proc-macro-hack` check was
never actually doing anything. The corresponding enum variant in
`proc-macro-hack` is named `Value` or `Nested` - it has never been
called `Input`. Due to a strange Crater issue, the Crater run that
tested adding this did *not* end up testing it - some of the crates that
would have failed did not actually have their tests checked, making it
seem as though the `proc-macro-hack` check was working.
The Crater issue is being discussed at
https://rust-lang.zulipchat.com/#narrow/stream/242791-t-infra/topic/Nearly.20identical.20Crater.20runs.20processed.20a.20crate.20differently/near/230406661
Despite the `proc-macro-hack` check not actually doing anything, we
haven't gotten any reports from users about their build being broken.
I went ahead and removed it entirely, since it's clear that no one is
being affected by the `proc-macro-hack` regression in practice.
|
|
|
|
|
|
|
|
|
|
|
|
actual changes in behaviour
This makes `type_alias_impl_trait` not actually do anything anymore
|
|
|
|
|
|
|
|
Introduce `rustc_interface::interface::Config::parse_sess_created` callback
Resolves #82900.
cc `@oli-obk`
|
|
Don't encode file information for span with a dummy location
Fixes #83112
The location information for a dummy span isn't real, so don't encode
it. This brings the incr comp cache code into line with the Span
`StableHash` impl, which doesn't hash the location information for dummy
spans.
Previously, we would attempt to load the 'original' file from a dummy
span - if the file id changed (e.g. due to being moved on disk), we would get an
ICE, since the Span was still valid due to its hash being unchanged.
|
|
Introduce `proc_macro_back_compat` lint, and emit for `time-macros-impl`
Now that future-incompat-report support has landed in nightly Cargo, we
can start to make progress towards removing the various proc-macro
back-compat hacks that have accumulated in the compiler.
This PR introduces a new lint `proc_macro_back_compat`, which results in
a future-incompat-report entry being generated. All proc-macro
back-compat warnings will be grouped under this lint. Note that this
lint will never actually become a hard error - instead, we will remove
the special cases for various macros, which will cause older versions of
those crates to emit some other error.
I've added code to fire this lint for the `time-macros-impl` case. This
is the easiest case out of all of our current back-compat hacks - the
crate was renamed to `time-macros`, so seeing a filename with
`time-macros-impl` guarantees that an older version of the parent `time`
crate is in use.
When Cargo's future-incompat-report feature gets stabilized, affected
users will start to see future-incompat warnings when they build their
crates.
|
|
Find more invalid doc attributes
- Lint on `#[doc(123)]`, `#[doc("hello")]`, etc.
- Lint every attribute; e.g., will now report two warnings for `#[doc(foo, bar)]`
- Add hyphen to "crate level"
- Display paths like `#[doc(foo::bar)]` correctly instead of as an empty string
|
|
Validate rustc_layout_scalar_valid_range_{start,end} attributes
Fixes #82251, fixes #82981.
|
|
Custom error on literal names from other languages
This detects all Java literal types and all single word C data types, and suggests the corresponding Rust literal type.
|
|
|
|
This detects all Java literal types and all single word C data types,
and suggests the corresponding Rust literal type.
|
|
Rebase and fixup #80493: Remove MIR assignments to ZST types
closes #80493
cc `@simonvandel`
r? `@oli-obk`
|
|
Avoid sorting predicates by `DefId`
Fixes issue #82920
Even if an item does not change between compilation sessions, it may end
up with a different `DefId`, since inserting/deleting an item affects
the `DefId`s of all subsequent items. Therefore, we use a `DefPathHash`
in the incremental compilation system, which is stable in the face of
changes to unrelated items.
In particular, the query system will consider the inputs to a query to
be unchanged if any `DefId`s in the inputs have their `DefPathHash`es
unchanged. Queries are pure functions, so the query result should be
unchanged if the query inputs are unchanged.
Unfortunately, it's possible to inadvertantly make a query result
incorrectly change across compilations, by relying on the specific value
of a `DefId`. Specifically, if the query result is a slice that gets
sorted by `DefId`, the precise order will depend on how the `DefId`s got
assigned in a particular compilation session. If some definitions end up
with different `DefId`s (but the same `DefPathHash`es) in a subsequent
compilation session, we will end up re-computing a *different* value for
the query, even though the query system expects the result to unchanged
due to the unchanged inputs.
It turns out that we have been sorting the predicates computed during
`astconv` by their `DefId`. These predicates make their way into the
`super_predicates_that_define_assoc_type`, which ends up getting used to
compute the vtables of trait objects. This, re-ordering these predicates
between compilation sessions can lead to undefined behavior at runtime -
the query system will re-use code built with a *differently ordered*
vtable, resulting in the wrong method being invoked at runtime.
This PR avoids sorting by `DefId` in `astconv`, fixing the
miscompilation. However, it's possible that other instances of this
issue exist - they could also be easily introduced in the future.
To fully fix this issue, we should
1. Turn on `-Z incremental-verify-ich` by default. This will cause the
compiler to ICE whenver an 'unchanged' query result changes between
compilation sessions, instead of causing a miscompilation.
2. Remove the `Ord` impls for `CrateNum` and `DefId`. This will make it
difficult to introduce ICEs in the first place.
|
|
Now that future-incompat-report support has landed in nightly Cargo, we
can start to make progress towards removing the various proc-macro
back-compat hacks that have accumulated in the compiler.
This PR introduces a new lint `proc_macro_back_compat`, which results in
a future-incompat-report entry being generated. All proc-macro
back-compat warnings will be grouped under this lint. Note that this
lint will never actually become a hard error - instead, we will remove
the special cases for various macros, which will cause older versions of
those crates to emit some other error.
I've added code to fire this lint for the `time-macros-impl` case. This
is the easiest case out of all of our current back-compat hacks - the
crate was renamed to `time-macros`, so seeing a filename with
`time-macros-impl` guarantees that an older version of the parent `time`
crate is in use.
When Cargo's future-incompat-report feature gets stabilized, affected
users will start to see future-incompat warnings when they build their
crates.
|
|
Fixes #83112
The location information for a dummy span isn't real, so don't encode
it. This brings the incr comp cache code into line with the Span
`StableHash` impl, which doesn't hash the location information for dummy
spans.
Previously, we would attempt to load the 'original' file from a dummy
span - if the file id changed (e.g. due to being moved on disk), we would get an
ICE, since the Span was still valid due to its hash being unchanged.
|
|
|
|
|
|
|
|
Improve the wording for the `can't reassign` error
Follow-up for https://github.com/rust-lang/rust/pull/71976#discussion_r448186151.
Fixes #66736
|
|
|
