| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Rollup of 6 pull requests
Successful merges:
- #83438 (Update RELEASES.md)
- #83707 (Remove `T: Debug` bound on UnsafeCell Debug impl)
- #84084 (Stabilize duration_zero.)
- #84121 (Stabilize BTree{Map,Set}::retain)
- #84140 (Don't call bump in check_mistyped_turbofish_with_multiple_type_params)
- #84141 (Fix typo in error message)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
Fix typo in error message
Also tweaked the message a bit by
- removing the hyphen, because in my opinion the hyphen makes the
message a bit harder to read, especially combined with the backticks;
- adding the word "be", because I think it's a bit clearer that way.
|
|
Don't call bump in check_mistyped_turbofish_with_multiple_type_params
Fixes https://github.com/rust-lang/rust/issues/84117
|
|
Check for asm support in UI tests that require it
Add `needs-asm-support` compiletest directive, and use it in asm tests
that require asm support without relying on any architecture specific
features.
Closes #84038.
|
|
r=m-ou-se
Stabilize nonzero_leading_trailing_zeros
Stabilizing nonzero_leading_trailing_zeros and due to this also stabilizing the intrinsic cttz_nonzero
FCP finished here: https://github.com/rust-lang/rust/issues/79143#issuecomment-817216153
`@rustbot` modify labels: +T-libs
Closes #79143
|
|
Add `needs-asm-support` compiletest directive, and use it in asm tests
that require asm support without relying on any architecture specific
features.
|
|
Also tweaked the message a bit by
- removing the hyphen, because in my opinion the hyphen makes the
message a bit harder to read, especially combined with the backticks;
- adding the word "be", because I think it's a bit clearer that way.
|
|
|
|
warn-by-default on 2015
|
|
Add `bad_asm_style` to HardwiredLints
This was missed when the lint was added, which prevents the lint from being ignored with `#[allow]`.
|
|
rustdoc: Move crate loader to collect_intra_doc_links::early
This groups the similar code together, and also allows making most of collect_intra_doc_links private again.
This builds on https://github.com/rust-lang/rust/pull/84066, but it wouldn't be too hard to base it off master if you want this to land first.
Helps with https://github.com/rust-lang/rust/issues/83761.
r? manishearth
Fixes https://github.com/rust-lang/rust/issues/84046
|
|
Improve test for `rustdoc::bare_urls` lint
- Rename `url-improvements` test to `bare-urls`
- Run rustfix for `bare-urls` test
|
|
Improve trait/impl method discrepancy errors
* Use more accurate spans
* Clean up some code by removing previous hack
* Provide structured suggestions
Structured suggestions are particularly useful for cases where arbitrary self types are used, like in custom `Future`s, because the way to write `self: Pin<&mut Self>` is not necessarily self-evident when first encountered.
|
|
Issue 81508 fix
Fix #81508
**Problem**: When variable name is used incorrectly as path, error and warning point to undeclared/unused name, when in fact the name is used, just incorrectly (should be used as a variable, not part of a path).
**Summary for fix**: When path resolution errs, diagnostics checks for variables in ```ValueNS``` that have the same name (e.g., variable rather than path named Foo), and adds additional suggestion that user may actually intend to use the variable name rather than a path.
The fix does not suppress or otherwise change the *warning* that results. I did not find a straightforward way in the code to modify this, but would love to make changes here as well with any guidance.
|
|
|
|
|
|
|
|
Implement token-based handling of attributes during expansion
This PR modifies the macro expansion infrastructure to handle attributes
in a fully token-based manner. As a result:
* Derives macros no longer lose spans when their input is modified
by eager cfg-expansion. This is accomplished by performing eager
cfg-expansion on the token stream that we pass to the derive
proc-macro
* Inner attributes now preserve spans in all cases, including when we
have multiple inner attributes in a row.
This is accomplished through the following changes:
* New structs `AttrAnnotatedTokenStream` and `AttrAnnotatedTokenTree` are introduced.
These are very similar to a normal `TokenTree`, but they also track
the position of attributes and attribute targets within the stream.
They are built when we collect tokens during parsing.
An `AttrAnnotatedTokenStream` is converted to a regular `TokenStream` when
we invoke a macro.
* Token capturing and `LazyTokenStream` are modified to work with
`AttrAnnotatedTokenStream`. A new `ReplaceRange` type is introduced, which
is created during the parsing of a nested AST node to make the 'outer'
AST node aware of the attributes and attribute target stored deeper in the token stream.
* When we need to perform eager cfg-expansion (either due to `#[derive]` or `#[cfg_eval]`), we tokenize and reparse our target, capturing additional information about the locations of `#[cfg]` and `#[cfg_attr]` attributes at any depth within the target. This is a performance optimization, allowing us to perform less work in the typical case where captured tokens never have eager cfg-expansion run.
|
|
This PR modifies the macro expansion infrastructure to handle attributes
in a fully token-based manner. As a result:
* Derives macros no longer lose spans when their input is modified
by eager cfg-expansion. This is accomplished by performing eager
cfg-expansion on the token stream that we pass to the derive
proc-macro
* Inner attributes now preserve spans in all cases, including when we
have multiple inner attributes in a row.
This is accomplished through the following changes:
* New structs `AttrAnnotatedTokenStream` and `AttrAnnotatedTokenTree` are introduced.
These are very similar to a normal `TokenTree`, but they also track
the position of attributes and attribute targets within the stream.
They are built when we collect tokens during parsing.
An `AttrAnnotatedTokenStream` is converted to a regular `TokenStream` when
we invoke a macro.
* Token capturing and `LazyTokenStream` are modified to work with
`AttrAnnotatedTokenStream`. A new `ReplaceRange` type is introduced, which
is created during the parsing of a nested AST node to make the 'outer'
AST node aware of the attributes and attribute target stored deeper in the token stream.
* When we need to perform eager cfg-expansion (either due to `#[derive]` or `#[cfg_eval]`),
we tokenize and reparse our target, capturing additional information about the locations of
`#[cfg]` and `#[cfg_attr]` attributes at any depth within the target.
This is a performance optimization, allowing us to perform less work
in the typical case where captured tokens never have eager cfg-expansion run.
|
|
Add a regression test for issue-51446
Closes #51446
r? `@estebank`
|
|
Previously, rustdoc would panic on links to external crates if they were
surrounded by backticks.
|
|
This will help us ensure that it emits valid suggestions.
|
|
The lint used to be called `non-autolinks`, and linted more than just
bare URLs. Now, it is called `bare-urls` and only lints against bare
URLs. So, `bare-urls` is a better name for the test.
|
|
Expand derive invocations in left-to-right order
While derives were being collected in left-to-order order, the
corresponding `Invocation`s were being pushed in the wrong order.
|
|
While derives were being collected in left-to-order order, the
corresponding `Invocation`s were being pushed in the wrong order.
|
|
Add some proc-macro attribute token handling tests
Split out from https://github.com/rust-lang/rust/pull/82608
r? `@petrochenkov`
|
|
|
|
Avoid `;` -> `,` recovery and unclosed `}` recovery from being too verbose
Those two recovery attempts have a very bad interaction that causes too
unnecessary output. Add a simple gate to avoid interpreting a `;` as a
`,` when there are unclosed braces.
Fix #83498.
|
|
Those two recovery attempts have a very bad interaction that causes too
unnecessary output. Add a simple gate to avoid interpreting a `;` as a
`,` when there are unclosed braces.
|
|
reduce threads spawned by ui-tests
The test harness already spawns enough tests to keep all cores busy.
Individual tests should keep their own threading to a minimum to avoid context switch overhead.
When running ui tests with lld enabled this shaves about 10% off that testsuite on my machine.
Resolves #81946
|
|
rustdoc: Don't generate blanket impls when running --show-coverage
`get_blanket_impls` is the slowest part of rustdoc, and the coverage pass
completely ignores blanket impls. This stops running it at all, and also
removes some unnecessary checks in `calculate_doc_coverage` that ignored
the impl anyway.
We don't currently measure --show-coverage in perf.rlo, but I tested
this locally on cargo and it brought the time down from 2.9 to 1.6
seconds.
This also adds back a commented-out test; Rustdoc has been able to deal with `impl trait` for almost a year now.
r? `@GuillaumeGomez`
|
|
Rustdoc has been able to deal with `impl trait` for almost a year now.
|
|
get_blanket_impls is the slowest part of rustdoc, and the coverage pass
completely ignores blanket impls. This stops running it at all, and also
removes some unnecessary checks in `calculate_doc_coverage` that ignored
the impl anyway.
We don't currently measure --show-coverage in perf.rlo, but I tested
this locally on cargo and it brought the time down from 2.9 to 1.6
seconds.
|
|
Use a more appropriate span for `;` suggestion
Fix #83892.
|
|
the test harness already spawns enough tests for all cores, individual
tests should keep their own threading to a minimum to avoid context switch
overhead
some tests fail with 1 CGU, so explicit compile flags have been added
to keep their old behavior
|
|
|
|
Don't concatenate binders across types
Partially addresses #83737
There's actually two issues that I uncovered in #83737. The first is that we are concatenating bound vars across types, i.e. in
```
F: Fn(&()) -> &mut (dyn Future<Output = ()> + Unpin)
```
the bound vars on `Future` get set as `for<anon>` since those are the binders on `Fn(&()`. This is obviously wrong, since we should only concatenate directly nested trait refs. This is solved here by introducing a new `TraitRefBoundary` scope, that we put around the "syntactical" trait refs and basically don't allow concatenation across.
Now, this alone *shouldn't* be a super terrible problem. At least not until you consider the other issue, which is a much more elusive and harder to design a "perfect" fix. A repro can be seen in:
```
use core::future::Future;
async fn handle<F>(slf: &F)
where
F: Fn(&()) -> &mut (dyn for<'a> Future<Output = ()> + Unpin),
{
(slf)(&()).await;
}
```
Notice the `for<'a>` around `Future`. Here, `'a` is unused, so the `for<'a>` Binder gets changed to a `for<>` Binder in the generator witness, but the "local decl" still has it. This has heavy intersections with region anonymization and erasing. Luckily, it's not *super* common to find this unique set of circumstances. It only became apparently because of the first issue mentioned here. However, this *is* still a problem, so I'm leaving #83737 open.
r? `@nikomatsakis`
|
|
Improve debuginfo for closures and async functions on Windows MSVC
The issue was that the resulting debuginfo was too complex for LLVM to
translate into CodeView records correctly. As a result, it simply
ignored the debuginfo which meant Windows debuggers could not display
any closed over variables when stepping inside a closure or async fn.
This fixes that by creating additional allocas on the stack so that
the resulting debuginfo is simple (just `*my_variable.dbg.spill`) and
LLVM can generate the correct CV records.
I also updated some of our existing tests to run in CDB to cover this case.
Before (closure):
After (closure):
Before (async):
After (async):
Fixes #83709
|
|
|
|
|
|
This is particularly useful for cases where arbitrary self types are
used, like in custom `Future`s.
|
|
Rollup of 6 pull requests
Successful merges:
- #80733 (Improve links in inline code in `core::pin`.)
- #81764 (Stabilize `rustdoc::bare_urls` lint)
- #81938 (Stabilize `peekable_peek_mut`)
- #83980 (Fix outdated crate names in compiler docs)
- #83992 (Merge idents when generating source content)
- #84001 (Update Clippy)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
Stabilize `rustdoc::bare_urls` lint
Closes https://github.com/rust-lang/rust/issues/77501. Closes https://github.com/rust-lang/rust/issues/83598.
|
|
The issue was that the resulting debuginfo was too complex for LLVM to
translate into CodeView records correctly. As a result, it simply
ignored the debuginfo which meant Windows debuggers could not display
any closed over variables when stepping inside a closure.
This fixes that by spilling additional variables to the stack so that
the resulting debuginfo is simple (just `*my_variable.dbg.spill`) and
LLVM can generate the correct CV records.
|
|
|
|
This commit implements the idea of a new ABI for the WebAssembly target,
one called `"wasm"`. This ABI is entirely of my own invention
and has no current precedent, but I think that the addition of this ABI
might help solve a number of issues with the WebAssembly targets.
When `wasm32-unknown-unknown` was first added to Rust I naively
"implemented an abi" for the target. I then went to write `wasm-bindgen`
which accidentally relied on details of this ABI. Turns out the ABI
definition didn't match C, which is causing issues for C/Rust interop.
Currently the compiler has a "wasm32 bindgen compat" ABI which is the
original implementation I added, and it's purely there for, well,
`wasm-bindgen`.
Another issue with the WebAssembly target is that it's not clear to me
when and if the default C ABI will change to account for WebAssembly's
multi-value feature (a feature that allows functions to return multiple
values). Even if this does happen, though, it seems like the C ABI will
be guided based on the performance of WebAssembly code and will likely
not match even what the current wasm-bindgen-compat ABI is today. This
leaves a hole in Rust's expressivity in binding WebAssembly where given
a particular import type, Rust may not be able to import that signature
with an updated C ABI for multi-value.
To fix these issues I had the idea of a new ABI for WebAssembly, one
called `wasm`. The definition of this ABI is "what you write
maps straight to wasm". The goal here is that whatever you write down in
the parameter list or in the return values goes straight into the
function's signature in the WebAssembly file. This special ABI is for
intentionally matching the ABI of an imported function from the
environment or exporting a function with the right signature.
With the addition of a new ABI, this enables rustc to:
* Eventually remove the "wasm-bindgen compat hack". Once this
ABI is stable wasm-bindgen can switch to using it everywhere.
Afterwards the wasm32-unknown-unknown target can have its default ABI
updated to match C.
* Expose the ability to precisely match an ABI signature for a
WebAssembly function, regardless of what the C ABI that clang chooses
turns out to be.
* Continue to evolve the definition of the default C ABI to match what
clang does on all targets, since the purpose of that ABI will be
explicitly matching C rather than generating particular function
imports/exports.
Naturally this is implemented as an unstable feature initially, but it
would be nice for this to get stabilized (if it works) in the near-ish
future to remove the wasm32-unknown-unknown incompatibility with the C
ABI. Doing this, however, requires the feature to be on stable because
wasm-bindgen works with stable Rust.
|
|
rustdoc: Link to the docs on namespaces when an unknown disambiguator is found
cc https://github.com/rust-lang/rust/issues/83859
`@lopopolo` does this look about like what you expected?
r? `@camelid`
|
|
Account for `ExprKind::Block` when suggesting .into() and deref
Fix #83943.
|
|
Add more info for common trait resolution and async/await errors
* Suggest `Pin::new`/`Box::new`/`Arc::new`/`Box::pin` in more cases
* Point at `impl` and type defs introducing requirements on E0277
|
|
Fix handling of `--output-format json` flag
- Don't treat it as deprecated on stable and beta channels. Before, it
would give confusing and incorrect output:
```
warning: the 'output-format' flag is considered deprecated
|
= warning: see issue #44136 <https://github.com/rust-lang/rust/issues/44136> for more information
error: json output format isn't supported for doc generation
```
Both of those are wrong: output-format isn't deprecated, and json
output is supported.
- Require -Z unstable-options for `--output-format json`
Previously, it was allowed by default on nightly, which made it hard
to realize the flag wouldn't be accepted on beta or stable.
To get the test working I had to remove `-Z unstable-options`, which x.py passed to compiletest unconditionally. It was first added in https://github.com/rust-lang/rust/commit/8c2ec689c159e7f021d5913efb991aff875be967 so `-Z miri` would be allowed. -Z miri is no longer passed unconditionally, so hopefully removing it won't break anything.
r? ```@aDotInTheVoid``` cc ```@HeroicKatora``` ```@CraftSpider```
Thanks to ```@memoryruins``` for pointing it out on Discord!
cc ```@Mark-Simulacrum``` for the change to compiletest.
|
