| Age | Commit message (Collapse) | Author | Lines |
|
This reverts commit e108481f74ff123ad98a63bd107a18d13035b275, reversing
changes made to 303e8bd768526a5812bb1776e798e829ddb7d3ca.
(cherry picked from commit ca1c17c88d1f625763859396ba7a50f36ac45cc0)
|
|
clippy-subtree-update
|
|
Begin to implement type system layer of unsafe binders
Mostly TODOs, but there's a lot of match arms that are basically just noops so I wanted to split these out before I put up the MIR lowering/projection part of this logic.
r? oli-obk
Tracking:
- https://github.com/rust-lang/rust/issues/130516
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add some convenience helper methods on `hir::Safety`
Makes a lot of call sites simpler and should make any refactorings needed for https://github.com/rust-lang/rust/pull/134090#issuecomment-2541332415 simpler, as fewer sites have to be touched in case we end up storing some information in the variants of `hir::Safety`
|
|
|
|
|
|
Add AST support for unsafe binders
I'm splitting up #130514 into pieces. It's impossible for me to keep up with a huge PR like that. I'll land type system support for this next, probably w/o MIR lowering, which will come later.
r? `@oli-obk`
cc `@BoxyUwU` and `@lcnr` who also may want to look at this, though this PR doesn't do too much yet
|
|
estebank:silence-resolve-errors-from-mod-with-parse-errors, r=davidtwco
Keep track of parse errors in `mod`s and don't emit resolve errors for paths involving them
When we expand a `mod foo;` and parse `foo.rs`, we now track whether that file had an unrecovered parse error that reached the end of the file. If so, we keep that information around in the HIR and mark its `DefId` in the `Resolver`. When resolving a path like `foo::bar`, we do not emit any errors for "`bar` not found in `foo`", as we know that the parse error might have caused `bar` to not be parsed and accounted for.
When this happens in an existing project, every path referencing `foo` would be an irrelevant compile error. Instead, we now skip emitting anything until `foo.rs` is fixed. Tellingly enough, we didn't have any test for errors caused by expansion of `mod`s with parse errors.
Fix https://github.com/rust-lang/rust/issues/97734.
|
|
|
|
|
|
involving them
When we expand a `mod foo;` and parse `foo.rs`, we now track whether that file had an unrecovered parse error that reached the end of the file. If so, we keep that information around. When resolving a path like `foo::bar`, we do not emit any errors for "`bar` not found in `foo`", as we know that the parse error might have caused `bar` to not be parsed and accounted for.
When this happens in an existing project, every path referencing `foo` would be an irrelevant compile error. Instead, we now skip emitting anything until `foo.rs` is fixed. Tellingly enough, we didn't have any test for errors caused by `mod` expansion.
Fix #97734.
|
|
Initial implementation of `#[feature(default_field_values]`, proposed in https://github.com/rust-lang/rfcs/pull/3681.
Support default fields in enum struct variant
Allow default values in an enum struct variant definition:
```rust
pub enum Bar {
Foo {
bar: S = S,
baz: i32 = 42 + 3,
}
}
```
Allow using `..` without a base on an enum struct variant
```rust
Bar::Foo { .. }
```
`#[derive(Default)]` doesn't account for these as it is still gating `#[default]` only being allowed on unit variants.
Support `#[derive(Default)]` on enum struct variants with all defaulted fields
```rust
pub enum Bar {
#[default]
Foo {
bar: S = S,
baz: i32 = 42 + 3,
}
}
```
Check for missing fields in typeck instead of mir_build.
Expand test with `const` param case (needs `generic_const_exprs` enabled).
Properly instantiate MIR const
The following works:
```rust
struct S<A> {
a: Vec<A> = Vec::new(),
}
S::<i32> { .. }
```
Add lint for default fields that will always fail const-eval
We *allow* this to happen for API writers that might want to rely on users'
getting a compile error when using the default field, different to the error
that they would get when the field isn't default. We could change this to
*always* error instead of being a lint, if we wanted.
This will *not* catch errors for partially evaluated consts, like when the
expression relies on a const parameter.
Suggestions when encountering `Foo { .. }` without `#[feature(default_field_values)]`:
- Suggest adding a base expression if there are missing fields.
- Suggest enabling the feature if all the missing fields have optional values.
- Suggest removing `..` if there are no missing fields.
|
|
Change `AttrArgs::Eq` to a struct variant
Cleanups for simplifying https://github.com/rust-lang/rust/pull/131808
Basically changes `AttrArgs::Eq` to a struct variant and then avoids several matches on `AttrArgsEq` in favor of methods on it. This will make future refactorings simpler, as they can either keep methods or switch to field accesses without having to restructure code
|
|
remove `Ty::is_copy_modulo_regions`
Using these functions is likely incorrect if an `InferCtxt` is available, I moved this function to `TyCtxt` (and added it to `LateContext`) and added a note to the documentation that one should prefer `Infer::type_is_copy_modulo_regions` instead.
I didn't yet move `is_sized` and `is_freeze`, though I think we should move these as well.
r? `@compiler-errors` cc #132279
|
|
|
|
|
|
Remove `hir::ArrayLen`
This refactoring removes `hir::ArrayLen`, replacing it with `hir::ConstArg`. To represent inferred array lengths (previously `hir::ArrayLen::Infer`), a new variant `ConstArgKind::Infer` is added.
r? `@BoxyUwU`
|
|
Remove Node::ArrayLenInfer
|
|
Clippy subtree update
r? `@Manishearth`
|
|
The compiler uses `BitSet<Local>`, because the number of locals doesn't
get that high, so clippy should do likewise.
|
|
clippy-subtree-update
|
|
|
|
remove is_trivially_const_drop
I'm not sure this still brings any perf benefits, so let's benchmark this.
r? `@compiler-errors`
|
|
|
|
|
|
take 2
open up coroutines
tweak the wordings
the lint works up until 2021
We were missing one case, for ADTs, which was
causing `Result` to yield incorrect results.
only include field spans with significant types
deduplicate and eliminate field spans
switch to emit spans to impl Drops
Co-authored-by: Niko Matsakis <nikomat@amazon.com>
collect drops instead of taking liveness diff
apply some suggestions and add explantory notes
small fix on the cache
let the query recurse through coroutine
new suggestion format with extracted variable name
fine-tune the drop span and messages
bugfix on runtime borrows
tweak message wording
filter out ecosystem types earlier
apply suggestions
clippy
check lint level at session level
further restrict applicability of the lint
translate bid into nop for stable mir
detect cycle in type structure
|
|
|
|
|
|
the behavior of the type system not only depends on the current
assumptions, but also the currentnphase of the compiler. This is
mostly necessary as we need to decide whether and how to reveal
opaque types. We track this via the `TypingMode`.
|
|
clippy-subtree-update
|
|
|
|
|
|
clippy-subtree-update
|
|
Remove unnecessary pub enum glob-imports from `rustc_middle::ty`
We used to have an idiom in the compiler where we'd prefix or suffix all the variants of an enum, for example `BoundRegionKind`, with something like `Br`, and then *glob-import* that enum variant directly.
`@noratrieb` brought this up, and I think that it's easier to read when we just use the normal style `EnumName::Variant`.
This PR is a bit large, but it's just naming.
The only somewhat opinionated change that this PR does is rename `BorrowKind::Imm` to `BorrowKind::Immutable` and same for the other variants. I think these enums are used sparingly enough that the extra length is fine.
r? `@noratrieb` or reassign
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remove `Engine`
It's just unnecessary plumbing. Removing it results in less code, and simpler code.
r? ``@cjgillot``
|
|
This is a standard pattern:
```
MyAnalysis.into_engine(tcx, body).iterate_to_fixpoint()
```
`into_engine` and `iterate_to_fixpoint` are always called in pairs, but
sometimes with a builder-style `pass_name` call between them. But a
builder-style interface is overkill here. This has been bugging me a for
a while.
This commit:
- Merges `Engine::new` and `Engine::iterate_to_fixpoint`. This removes
the need for `Engine` to have fields, leaving it as a trivial type
that the next commit will remove.
- Renames `Analysis::into_engine` as `Analysis::iterate_to_fixpoint`,
gives it an extra argument for the optional pass name, and makes it
call `Engine::iterate_to_fixpoint` instead of `Engine::new`.
This turns the pattern from above into this:
```
MyAnalysis.iterate_to_fixpoint(tcx, body, None)
```
which is shorter at every call site, and there's less plumbing required
to support it.
|