| Age | Commit message (Collapse) | Author | Lines |
|---|
|
r=oli-obk
Store the laziness of type aliases in their `DefKind`
Previously, we would treat paths referring to type aliases as *lazy* type aliases if the current crate had lazy type aliases enabled independently of whether the crate which the alias was defined in had the feature enabled or not.
With this PR, the laziness of a type alias depends on the crate it is defined in. This generally makes more sense to me especially if / once lazy type aliases become the default in a new edition and we need to think about *edition interoperability*:
Consider the hypothetical case where the dependency crate has an older edition (and thus eager type aliases), it exports a type alias with bounds & a where-clause (which are void but technically valid), the dependent crate has the latest edition (and thus lazy type aliases) and it uses that type alias. Arguably, the bounds should *not* be checked since at any time, the dependency crate should be allowed to change the bounds at will with a *non*-major version bump & without negatively affecting downstream crates.
As for the reverse case (dependency: lazy type aliases, dependent: eager type aliases), I guess it rules out anything from slight confusion to mild annoyance from upstream crate authors that would be caused by the compiler ignoring the bounds of their type aliases in downstream crates with older editions.
---
This fixes #114468 since before, my assumption that the type alias associated with a given weak projection was lazy (and therefore had its variances computed) did not necessarily hold in cross-crate scenarios (which [I kinda had a hunch about](https://github.com/rust-lang/rust/pull/114253#discussion_r1278608099)) as outlined above. Now it does hold.
`@rustbot` label F-lazy_type_alias
r? `@oli-obk`
|
|
|
|
Add documentation to has_deref
Documentation of `has_deref` needed some polish to be more clear about where it should be used and what's it's purpose.
cc https://github.com/rust-lang/rust/issues/114401
r? `@RalfJung`
|
|
|
|
Rollup of 9 pull requests
Successful merges:
- #113945 (Fix wrong span for trait selection failure error reporting)
- #114351 ([rustc_span][perf] Remove unnecessary string joins and allocs.)
- #114418 (bump parking_lot to 0.12)
- #114434 (Improve spans for indexing expressions)
- #114450 (Fix ICE failed to get layout for ReferencesError)
- #114461 (Fix unwrap on None)
- #114462 (interpret: add mplace_to_ref helper method)
- #114472 (Reword `confusable_idents` lint)
- #114477 (Account for `Rc` and `Arc` when suggesting to clone)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
Improve spans for indexing expressions
fixes #114388
Indexing is similar to method calls in having an arbitrary left-hand-side and then something on the right, which is the main part of the expression. Method calls already have a span for that right part, but indexing does not. This means that long method chains that use indexing have really bad spans, especially when the indexing panics and that span in coverted into a panic location.
This does the same thing as method calls for the AST and HIR, storing an extra span which is then put into the `fn_span` field in THIR.
r? compiler-errors
|
|
Lots of tiny incremental simplifications of `EmitterWriter` internals
ignore the first commit, it's https://github.com/rust-lang/rust/pull/114088 squashed and rebased, but it's needed to use to use `derive_setters`, as they need a newer `syn` version.
Then this PR starts out with removing many arguments that are almost always defaulted to `None` or `false` and replace them with builder methods that can set these fields in the few cases that want to set them.
After that it's one commit after the other that removes or merges things until everything becomes some very simple trait objects
|
|
Indexing is similar to method calls in having an arbitrary
left-hand-side and then something on the right, which is the main part
of the expression. Method calls already have a span for that right part,
but indexing does not. This means that long method chains that use
indexing have really bad spans, especially when the indexing panics and
that span in coverted into a panic location.
This does the same thing as method calls for the AST and HIR, storing an
extra span which is then put into the `fn_span` field in THIR.
|
|
Perform OpaqueCast field projection on HIR, too.
fixes #105819
This is necessary for closure captures in 2021 edition, as they capture individual fields, not the full mentioned variables. So it may try to capture a field of an opaque (because the hidden type is known to be something with a field).
See https://github.com/rust-lang/rust/pull/99806 for when and why we added OpaqueCast to MIR.
|
|
Add `internal_features` lint
Implements https://github.com/rust-lang/compiler-team/issues/596
Also requires some more test blessing for codegen tests etc
`@jyn514` had the idea of just `allow`ing the lint by default in the test suite. I'm not sure whether this is a good idea, but it's definitely one worth considering. Additional input encouraged.
|
|
Expand, rename and improve `incorrect_fn_null_checks` lint
This PR,
- firstly, expand the lint by now linting on references
- secondly, it renames the lint `incorrect_fn_null_checks` -> `useless_ptr_null_checks`
- and thirdly it improves the lint by catching `ptr::from_mut`, `ptr::from_ref`, as well as `<*mut _>::cast` and `<*const _>::cast_mut`
Fixes https://github.com/rust-lang/rust/issues/113601
cc ```@est31```
|
|
It lints against features that are inteded to be internal to the
compiler and standard library. Implements MCP #596.
We allow `internal_features` in the standard library and compiler as those
use many features and this _is_ the standard library from the "internal to the compiler and
standard library" after all.
Marking some features as internal wasn't exactly the most scientific approach, I just marked some
mostly obvious features. While there is a categorization in the macro,
it's not very well upheld (should probably be fixed in another PR).
We always pass `-Ainternal_features` in the testsuite
About 400 UI tests and several other tests use internal features.
Instead of throwing the attribute on each one, just always allow them.
There's nothing wrong with testing internal features^^
|
|
r=estebank
Avoid wrong code suggesting for attribute macro
Fixes #107113
r? `@estebank`
|
|
|
|
|
|
|
|
|
|
colored and uncolored printing
|
|
|
|
Mark `map_or` as `#[must_use]`
I don't know what else to say.
r? libs
|
|
|
|
Rename and allow `cast_ref_to_mut` lint
This PR is a small subset of https://github.com/rust-lang/rust/pull/112431, that is the renaming of the lint (`cast_ref_to_mut` -> `invalid_reference_casting`).
BUT also temporarily change the default level of the lint from deny-by-default to allow-by-default until https://github.com/rust-lang/rust/pull/112431 is merged.
r? `@Nilstrieb`
|
|
r=compiler-errors
make `noop_method_call` warn by default
r? `@compiler-errors`
|
|
|
|
Remove `constness` from `ParamEnv`
This should be replaced by keyword generics/effects. cc #110395
r? `@oli-obk`
|
|
|
|
Unite bless environment variables under `RUST_BLESS`
Currently, Clippy and Miri both use an environment variable to indicate that output should be blessed, but they use different variable names. In order to improve consistency, this patch applies the following changes:
- Rename the variable `MIRI_BLESS` (as used in the Miri subtree) to `RUST_BLESS`
- Rename the variable `BLESS` (as used in the Clippy subtree) to `RUST_BLESS`
- Move emitting `RUST_BLESS` into `prepare_cargo_test` so it is always available (I need this for a WIP PR)
---
I prefer something like `RUST_BLESS` to `BLESS` just for a lower chance of conflict (not super common but other tools [do use `BLESS`](https://grep.app/search?q=%22BLESS%22&case=true&words=true&filter[lang][0]=Text&filter[lang][1]=Rust&filter[lang][2]=Python&filter[lang][3]=C%2B%2B&filter[lang][4]=Markdown&filter[lang][5]=C&filter[lang][6]=JSON)), but I can change it to whatever is preferred.
Original discussion: https://rust-lang.zulipchat.com/#narrow/stream/257328-clippy/topic/BLESS.20env.20var.3A.20rename.20to.20CLIPPY_BLESS
r? `@oli-obk`
cc `@flip1995`
|
|
|
|
Currently, Clippy, Miri, Rustfmt, and rustc all use an environment variable to
indicate that output should be blessed, but they use different variable names.
In order to improve consistency, this patch applies the following changes:
- Emit `RUSTC_BLESS` within `prepare_cargo_test` so it is always
available
- Change usage of `MIRI_BLESS` in the Miri subtree to use `RUSTC_BLESS`
- Change usage of `BLESS` in the Clippy subtree to `RUSTC_BLESS`
- Change usage of `BLESS` in the Rustfmt subtree to `RUSTC_BLESS`
- Adjust the blessable test in `rustc_errors` to use this same
convention
- Update documentation where applicable
Any tools that uses `RUSTC_BLESS` should check that it is set to any value
other than `"0"`.
|
|
Add `sym::iter_mut` + `sym::as_mut_ptr` for Clippy
We currently have `sym::iter` and `sym::iter_repeat`, this PR adds `sym::iter_mut` as it's useful for https://github.com/rust-lang/rust-clippy/pull/11038 and another Clippy lint, it also adds `sym::as_mut_ptr` as it's useful for https://github.com/rust-lang/rust-clippy/pull/10962.
|
|
Split some functions with many arguments into builder pattern functions
r? `@estebank`
This doesn't resolve all of the ones in rustc, mostly because I need to do other cleanups in order to be able to use some builder derives from crates.io
Works around https://github.com/rust-lang/rust/issues/90672 by making `x test rustfmt --bless` format itself instead of testing that it is formatted
|
|
|
|
Rollup of 7 pull requests
Successful merges:
- #114008 (coverage: Obtain the `__llvm_covfun` section name outside a per-function loop)
- #114014 (builtin_macros: expect raw strings too)
- #114043 (docs(LazyLock): add example pass local LazyLock variable to struct)
- #114051 (Add regression test for invalid "unused const" in method)
- #114052 (Suggest `{Option,Result}::as_ref()` instead of `cloned()` in some cases)
- #114058 (Add help for crate arg when crate name is invalid)
- #114060 (abi: unsized field in union - assert to delay bug )
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
builtin_macros: expect raw strings too
Fixes #114010.
`expr_to_string` allows raw strings through so this code should be expected to handle those.
|
|
Normalize the RHS of an `Unsize` goal in the new solver
`Unsize` goals are... tricky. Not only do they structurally match on their self type, but they're also structural on their other type parameter. I'm pretty certain that it is both incomplete and also just plain undesirable to not consider normalizing the RHS of an unsize goal. More practically, I'd like for this code to work:
```rust
trait A {}
trait B: A {}
impl A for usize {}
impl B for usize {}
trait Mirror {
type Assoc: ?Sized;
}
impl<T: ?Sized> Mirror for T {
type Assoc = T;
}
fn main() {
// usize: Unsize<dyn B>
let x = Box::new(1usize) as Box<<dyn B as Mirror>::Assoc>;
// dyn A: Unsize<dyn B>
let y = x as Box<<dyn A as Mirror>::Assoc>;
}
```
---
In order to achieve this, we add `EvalCtxt::normalize_non_self_ty` (naming modulo bikeshedding), which *must* be used for all non-self type arguments that are structurally matched in candidate assembly. Currently this is only necessary for `Unsize`'s argument, but I could see future traits requiring this (hopefully rarely) in the future. It uses `repeat_while_none` to limit infinite looping, and normalizes the self type until it is no longer an alias.
Also, we need to fix feature gate detection for `trait_upcasting` and `unsized_tuple_coercion` when HIR typeck has unnormalized types. We can do that by checking the `ImplSource` returned by selection, which necessitates adding a new impl source for tuple upcasting.
|
|
|
|
|
|
|
|
Signed-off-by: David Wood <david@davidtw.co>
|
|
This is necessary for closure captures in 2021 edition, as they capture individual fields, not the full mentioned variables. So it may try to capture a field of an opaque (because the hidden type is known to be something with a field).
|
|
|
|
|
|
Implement rust-lang/compiler-team#578.
When an ICE is encountered on nightly releases, the new rustc panic
handler will also write the contents of the backtrace to disk. If any
`delay_span_bug`s are encountered, their backtrace is also added to the
file. The platform and rustc version will also be collected.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Uplift `clippy::fn_null_check` lint
This PR aims at uplifting the `clippy::fn_null_check` lint into rustc.
## `incorrect_fn_null_checks`
(warn-by-default)
The `incorrect_fn_null_checks` lint checks for expression that checks if a function pointer is null.
### Example
```rust
let fn_ptr: fn() = /* somehow obtained nullable function pointer */
if (fn_ptr as *const ()).is_null() { /* ... */ }
```
### Explanation
Function pointers are assumed to be non-null, checking for their nullity is incorrect.
-----
Mostly followed the instructions for uplifting a clippy lint described here: https://github.com/rust-lang/rust/pull/99696#pullrequestreview-1134072751
`@rustbot` label: +I-lang-nominated
r? compiler
|
