| Age | Commit message (Collapse) | Author | Lines |
|---|
|
|
|
|
|
|
|
for both windows and unixes
|
|
Recently, another Miri user was trying to run `cargo miri test` on the
crate `iced-x86` with `--features=code_asm,mvex`. This configuration has
a startup time of ~18 minutes. That's ~18 minutes before any tests even
start to run. The fact that this crate has over 26,000 tests and Miri is
slow makes a lot of code which is otherwise a bit sloppy but fine into a
huge runtime issue.
Sorting the tests when the test harness is created instead of at startup
time knocks just under 4 minutes out of those ~18 minutes. I have ways
to remove most of the rest of the startup time, but this change requires
coordinating changes of both the compiler and libtest, so I'm sending it
separately.
|
|
Avoid cloning a collection only to iterate over it
`@rustbot` label: +C-cleanup
|
|
Add GDB/LLDB pretty-printers for NonZero types
Add GDB/LLDB pretty-printers for `NonZero` types.
These pretty-printers were originally implemented for IntelliJ Rust by ```@Kobzol``` in https://github.com/intellij-rust/intellij-rust/pull/5270.
Part of #29392.
|
|
session: stabilize split debuginfo on linux
Stabilize the `-Csplit-debuginfo` flag...
- ...on Linux for all values of the flag. Split DWARF has been implemented for a few months, hasn't had any bug reports and has had some promising benchmarking for incremental debug build performance.
- ..on other platforms for the default value. It doesn't make any sense that `-Csplit-debuginfo=packed` is unstable on Windows MSVC when that's the default behaviour, but keep the other values unstable.
|
|
|
|
Stabilize the `-Csplit-debuginfo` flag...
- ...on Linux for all values of the flag. Split DWARF has been
implemented for a few months, hasn't had any bug reports and has had
some promising benchmarking for incremental debug build performance.
- ..on other platforms for the default value. It doesn't make any sense
that `-Csplit-debuginfo=packed` is unstable on Windows MSVC when
that's the default behaviour, but keep the other values unstable.
Signed-off-by: David Wood <david.wood@huawei.com>
|
|
nonexistant -> nonexistent
|
|
|
|
|
|
|
|
This primarily is so that `ignore-wasm` works as expected (ignores all wasm-like targets).
|
|
|
|
This adds a new option, `-Zmir-pretty-relative-line-numbers`, that
is then used in compiletest for the mir-opt tests.
|
|
Add fine-grained LLVM CFI support to the Rust compiler
This PR improves the LLVM Control Flow Integrity (CFI) support in the Rust compiler by providing forward-edge control flow protection for Rust-compiled code only by aggregating function pointers in groups identified by their return and parameter types.
Forward-edge control flow protection for C or C++ and Rust -compiled code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code share the same virtual address space) will be provided in later work as part of this project by identifying C char and integer type uses at the time types are encoded (see Type metadata in the design document in the tracking issue https://github.com/rust-lang/rust/issues/89653).
LLVM CFI can be enabled with -Zsanitizer=cfi and requires LTO (i.e., -Clto).
Thank you again, `@eddyb,` `@nagisa,` `@pcc,` and `@tmiasko` for all the help!
|
|
Add support for LLVM ShadowCallStack.
LLVMs ShadowCallStack provides backward edge control flow integrity protection by using a separate shadow stack to store and retrieve a function's return address.
LLVM currently only supports this for AArch64 targets. The x18 register is used to hold the pointer to the shadow stack, and therefore this only works on ABIs which reserve x18. Further details are available in the [LLVM ShadowCallStack](https://clang.llvm.org/docs/ShadowCallStack.html) docs.
# Usage
`-Zsanitizer=shadow-call-stack`
# Comments/Caveats
* Currently only enabled for the aarch64-linux-android target
* Requires the platform to define a runtime to initialize the shadow stack, see the [LLVM docs](https://clang.llvm.org/docs/ShadowCallStack.html) for more detail.
|
|
This commit improves the LLVM Control Flow Integrity (CFI) support in
the Rust compiler by providing forward-edge control flow protection for
Rust-compiled code only by aggregating function pointers in groups
identified by their return and parameter types.
Forward-edge control flow protection for C or C++ and Rust -compiled
code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code
share the same virtual address space) will be provided in later work as
part of this project by identifying C char and integer type uses at the
time types are encoded (see Type metadata in the design document in the
tracking issue #89653).
LLVM CFI can be enabled with -Zsanitizer=cfi and requires LTO (i.e.,
-Clto).
|
|
Adds support for the LLVM ShadowCallStack sanitizer.
|
|
|
|
|
|
|
|
This makes `edition: 2021` work instead of the ugly
`edition:2021` one has to write.
|
|
Only obey optimize-tests flag on UI tests that are run-pass
stage1 UI tests walltime on my machine:
```
optimize-tests = false, master
25.98s
optimize-tests = true, master
34.69s
optimize-tests = true, patched
28.79s
```
Effects:
- faster UI tests
- llvm asserts get exercised less on build-pass tests
- the difference between opt and nopt builds shrinks a bit
- aux libs don't get optimized since they don't have a pass mode and almost never have explicit compile flags
|
|
|
|
```
optimize-tests = false, master
25.98s
optimize-tests = true, master
34.69s
optimize-tests = true, patched
28.79s
```
Effects:
- faster UI tests
- llvm asserts get exercised less on build-pass tests
- the difference between opt and nopt builds shrinks a bit
- aux libs don't get optimized since they don't have a pass mode and almost never have explicit compile flags
|
|
Previously, this printed the debugging options, not the lint options,
and only handled `-Whelp`, not `-A/-D/-F`.
This also fixes a few other misc issues:
- Fix `// check-stdout` for UI tests; previously it only worked for run-fail and compile-fail tests
- Add lint headers for tool lints, not just builtin lints
- Remove duplicate run-make test
|
|
Remove references to `./tmp` in-tree
These used to be used by codegen-units tests, but were switched from manually specifying directories
to just using `// incremental` in https://github.com/rust-lang/rust/pull/89101.
Remove the old references.
Fixes https://github.com/rust-lang/rust/issues/34586.
|
|
These used to be used by codegen-units tests, but were switched from manually specifying directories
to just using `// incremental` in https://github.com/rust-lang/rust/pull/89101.
Remove the old references.
|
|
|
|
|
|
|
|
|
|
Remove migrate borrowck mode
Closes #58781
Closes #43234
# Stabilization proposal
This PR proposes the stabilization of `#![feature(nll)]` and the removal of `-Z borrowck`. Current borrow checking behavior of item bodies is currently done by first infering regions *lexically* and reporting any errors during HIR type checking. If there *are* any errors, then MIR borrowck (NLL) never occurs. If there *aren't* any errors, then MIR borrowck happens and any errors there would be reported. This PR removes the lexical region check of item bodies entirely and only uses MIR borrowck. Because MIR borrowck could never *not* be run for a compiled program, this should not break any programs. It does, however, change diagnostics significantly and allows a slightly larger set of programs to compile.
Tracking issue: #43234
RFC: https://github.com/rust-lang/rfcs/blob/master/text/2094-nll.md
Version: 1.63 (2022-06-30 => beta, 2022-08-11 => stable).
## Motivation
Over time, the Rust borrow checker has become "smarter" and thus allowed more programs to compile. There have been three different implementations: AST borrowck, MIR borrowck, and polonius (well, in progress). Additionally, there is the "lexical region resolver", which (roughly) solves the constraints generated through HIR typeck. It is not a full borrow checker, but does emit some errors.
The AST borrowck was the original implementation of the borrow checker and was part of the initially stabilized Rust 1.0. In mid 2017, work began to implement the current MIR borrow checker and that effort ompleted by the end of 2017, for the most part. During 2018, efforts were made to migrate away from the AST borrow checker to the MIR borrow checker - eventually culminating into "migrate" mode - where HIR typeck with lexical region resolving following by MIR borrow checking - being active by default in the 2018 edition.
In early 2019, migrate mode was turned on by default in the 2015 edition as well, but with MIR borrowck errors emitted as warnings. By late 2019, these warnings were upgraded to full errors. This was followed by the complete removal of the AST borrow checker.
In the period since, various errors emitted by the MIR borrow checker have been improved to the point that they are mostly the same or better than those emitted by the lexical region resolver.
While there do remain some degradations in errors (tracked under the [NLL-diagnostics tag](https://github.com/rust-lang/rust/issues?q=is%3Aopen+is%3Aissue+label%3ANLL-diagnostics), those are sufficiently small and rare enough that increased flexibility of MIR borrow check-only is now a worthwhile tradeoff.
## What is stabilized
As said previously, this does not fundamentally change the landscape of accepted programs. However, there are a [few](https://github.com/rust-lang/rust/issues?q=is%3Aopen+is%3Aissue+label%3ANLL-fixed-by-NLL) cases where programs can compile under `feature(nll)`, but not otherwise.
There are two notable patterns that are "fixed" by this stabilization. First, the `scoped_threads` feature, which is a continutation of a pre-1.0 API, can sometimes emit a [weird lifetime error](https://github.com/rust-lang/rust/issues/95527) without NLL. Second, actually seen in the standard library. In the `Extend` impl for `HashMap`, there is an implied bound of `K: 'a` that is available with NLL on but not without - this is utilized in the impl.
As mentioned before, there are a large number of diagnostic differences. Most of them are better, but some are worse. None are serious or happen often enough to need to block this PR. The biggest change is the loss of error code for a number of lifetime errors in favor of more general "lifetime may not live long enough" error. While this may *seem* bad, the former error codes were just attempts to somewhat-arbitrarily bin together lifetime errors of the same type; however, on paper, they end up being roughly the same with roughly the same kinds of solutions.
## What isn't stabilized
This PR does not completely remove the lexical region resolver. In the future, it may be possible to remove that (while still keeping HIR typeck) or to remove it together with HIR typeck.
## Tests
Many test outputs get updated by this PR. However, there are number of tests specifically geared towards NLL under `src/test/ui/nll`
## History
* On 2017-07-14, [tracking issue opened](https://github.com/rust-lang/rust/issues/43234)
* On 2017-07-20, [initial empty MIR pass added](https://github.com/rust-lang/rust/pull/43271)
* On 2017-08-29, [RFC opened](https://github.com/rust-lang/rfcs/pull/2094)
* On 2017-11-16, [Integrate MIR type-checker with NLL](https://github.com/rust-lang/rust/pull/45825)
* On 2017-12-20, [NLL feature complete](https://github.com/rust-lang/rust/pull/46862)
* On 2018-07-07, [Don't run AST borrowck on mir mode](https://github.com/rust-lang/rust/pull/52083)
* On 2018-07-27, [Add migrate mode](https://github.com/rust-lang/rust/pull/52681)
* On 2019-04-22, [Enable migrate mode on 2015 edition](https://github.com/rust-lang/rust/pull/59114)
* On 2019-08-26, [Don't downgrade errors on 2015 edition](https://github.com/rust-lang/rust/pull/64221)
* On 2019-08-27, [Remove AST borrowck](https://github.com/rust-lang/rust/pull/64790)
|
|
r=Mark-Simulacrum
[compiletest] Ignore known paths when abbreviating output
To prevent out of memory conditions, compiletest limits the amount of output a test can generate, abbreviating it if the test emits more than a threshold. While the behavior is desirable, it also causes some issues (like #96229, #94322 and #92211).
The latest one happened recently, when the `src/test/ui/numeric/numeric-cast.rs` test started to fail on systems where the path of the rust-lang/rust checkout is too long. This includes my own development machine and [LLVM's CI](https://github.com/rust-lang/rust/issues/96362#issuecomment-1108609893). Rust's CI uses a pretty short directory name for the checkout, which hides these sort of problems until someone runs the test suite on their own computer.
When developing the fix I tried to find the most targeted fix that would prevent this class of failures from happening in the future, deferring the decision on if/how to redesign abbreviation to a later date. The solution I came up with was to ignore known base paths when calculating whether the output exceeds the abbreviation threshold, which removes this kind of nondeterminism.
This PR is best reviewed commit-by-commit.
|
|
|
|
|
|
|
|
attribute. Add tests for embedding pretty printers and update documentation.
Ensure all error checking for `#[debugger_visualizer]` is done up front and not when the `debugger_visualizer` query is run.
Clean up potential ODR violations when embedding pretty printers into the `__rustc_debug_gdb_scripts_section__` section.
Respond to PR comments and update documentation.
|
|
|
|
Add compiletest and bootstrap "--skip" option forwarded to libtest
With this PR, "x.py test --skip SKIP ..." will run the specified test suite, but forward "--skip SKIP" to the test tool. libtest already supports this option. The PR also adds it to compiletest which itself just forwards it to libtest.
Adds the functionality requested in https://github.com/rust-lang/rust/issues/96342. This is useful to work around tests broken upstream.
https://github.com/rust-lang/rust/issues/96362#issuecomment-1108609893 is the specific test issue my project is trying to work around.
|
|
When testing macros from `rustc_macros` in `ui-fulldeps` tests,
sometimes paths from the compiler source tree can be shown in error
messages - these need to be normalized.
Signed-off-by: David Wood <david.wood@huawei.com>
|
|
libtest already supports a "--skip SUBSTRING" arg which excludes any
test names matching SUBSTRING.
This adds a "--skip" argument to compiletest and bootstrap which is
forwarded to libtest.
|
|
|
|
|
|
|
|
|
|
|
