| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Add support for `--env` on `tracked_env::var`
Follow-up of https://github.com/rust-lang/rust/pull/118368.
Part of Part of https://github.com/rust-lang/rust/issues/80792.
It adds support of the `--env` option for proc-macros through `tracked_env::var`.
r? `@Nilstrieb`
|
|
|
|
Remove edition umbrella features.
In the 2018 edition, there was an "umbrella" feature `#[feature(rust_2018_preview)]` which was used to enable several other features at once. This umbrella mechanism was not used in the 2021 edition and likely will not be used in 2024 either. During 2018 users reported that setting the feature was awkward, especially since they already needed to opt-in via the edition mechanism.
This PR removes this mechanism because I believe it will not be used (and will clean up and simplify the code). I believe that there are better ways to handle features and editions. In short:
- For highly experimental features, that may or may not be involved in an edition, they can implement regular feature gates like `tcx.features().my_feature`.
- For experimental features that *might* be involved in an edition, they should implement gates with `tcx.features().my_feature && span.at_least_rust_20xx()`. This requires the user to still specify `#![feature(my_feature)]`, to avoid disrupting testing of other edition features which are ready and have been accepted within the edition.
- For experimental features that have graduated to definitely be part of an edition, they should implement gates with `tcx.features().my_feature || span.at_least_rust_20xx()`, or just remove the feature check altogether and just check `span.at_least_rust_20xx()`.
- For relatively simple changes, they can skip the whole feature gating thing and just check `span.at_least_rust_20xx()`, and rely on the instability of the edition itself (which requires `-Zunstable-options`) to gate it.
I am working on documenting all of this in the rustc-dev-guide.
|
|
This is an extension of the previous commit. It means the output of
something like this:
```
stringify!(let a: Vec<u32> = vec![];)
```
goes from this:
```
let a: Vec<u32> = vec![] ;
```
With this PR, it now produces this string:
```
let a: Vec<u32> = vec![];
```
|
|
`tokenstream::Spacing` appears on all `TokenTree::Token` instances,
both punct and non-punct. Its current usage:
- `Joint` means "can join with the next token *and* that token is a
punct".
- `Alone` means "cannot join with the next token *or* can join with the
next token but that token is not a punct".
The fact that `Alone` is used for two different cases is awkward.
This commit augments `tokenstream::Spacing` with a new variant
`JointHidden`, resulting in:
- `Joint` means "can join with the next token *and* that token is a
punct".
- `JointHidden` means "can join with the next token *and* that token is a
not a punct".
- `Alone` means "cannot join with the next token".
This *drastically* improves the output of `print_tts`. For example,
this:
```
stringify!(let a: Vec<u32> = vec![];)
```
currently produces this string:
```
let a : Vec < u32 > = vec! [] ;
```
With this PR, it now produces this string:
```
let a: Vec<u32> = vec![] ;
```
(The space after the `]` is because `TokenTree::Delimited` currently
doesn't have spacing information. The subsequent commit fixes this.)
The new `print_tts` doesn't replicate original code perfectly. E.g.
multiple space characters will be condensed into a single space
character. But it's much improved.
`print_tts` still produces the old, uglier output for code produced by
proc macros. Because we have to translate the generated code from
`proc_macro::Spacing` to the more expressive `token::Spacing`, which
results in too much `proc_macro::Along` usage and no
`proc_macro::JointHidden` usage. So `space_between` still exists and
is used by `print_tts` in conjunction with the `Spacing` field.
This change will also help with the removal of `Token::Interpolated`.
Currently interpolated tokens are pretty-printed nicely via AST pretty
printing. `Token::Interpolated` removal will mean they get printed with
`print_tts`. Without this change, that would result in much uglier
output for code produced by decl macro expansions. With this change, AST
pretty printing and `print_tts` produce similar results.
The commit also tweaks the comments on `proc_macro::Spacing`. In
particular, it refers to "compound tokens" rather than "multi-char
operators" because lifetimes aren't operators.
|
|
|
|
When encoutering a privacy error on an item through a re-export that is
accessible in an alternative path, provide a structured suggestion with
that path.
```
error[E0603]: module import `mem` is private
--> $DIR/private-std-reexport-suggest-public.rs:4:14
|
LL | use foo::mem;
| ^^^ private module import
|
note: the module import `mem` is defined here...
--> $DIR/private-std-reexport-suggest-public.rs:8:9
|
LL | use std::mem;
| ^^^^^^^^
note: ...and refers to the module `mem` which is defined here
--> $SRC_DIR/std/src/lib.rs:LL:COL
|
= note: you could import this
help: import `mem` through the re-export
|
LL | use std::mem;
| ~~~~~~~~
```
Fix #42909.
|
|
Stabilize C string literals
RFC: https://rust-lang.github.io/rfcs/3348-c-str-literal.html
Tracking issue: https://github.com/rust-lang/rust/issues/105723
Documentation PR (reference manual): https://github.com/rust-lang/reference/pull/1423
# Stabilization report
Stabilizes C string and raw C string literals (`c"..."` and `cr#"..."#`), which are expressions of type [`&CStr`](https://doc.rust-lang.org/stable/core/ffi/struct.CStr.html). Both new literals require Rust edition 2021 or later.
```rust
const HELLO: &core::ffi::CStr = c"Hello, world!";
```
C strings may contain any byte other than `NUL` (`b'\x00'`), and their in-memory representation is guaranteed to end with `NUL`.
## Implementation
Originally implemented by PR https://github.com/rust-lang/rust/pull/108801, which was reverted due to unintentional changes to lexer behavior in Rust editions < 2021.
The current implementation landed in PR https://github.com/rust-lang/rust/pull/113476, which restricts C string literals to Rust edition >= 2021.
## Resolutions to open questions from the RFC
* Adding C character literals (`c'.'`) of type `c_char` is not part of this feature.
* Support for `c"..."` literals does not prevent `c'.'` literals from being added in the future.
* C string literals should not be blocked on making `&CStr` a thin pointer.
* It's possible to declare constant expressions of type `&'static CStr` in stable Rust (as of v1.59), so C string literals are not adding additional coupling on the internal representation of `CStr`.
* The unstable `concat_bytes!` macro should not accept `c"..."` literals.
* C strings have two equally valid `&[u8]` representations (with or without terminal `NUL`), so allowing them to be used in `concat_bytes!` would be ambiguous.
* Adding a type to represent C strings containing valid UTF-8 is not part of this feature.
* Support for a hypothetical `&Utf8CStr` may be explored in the future, should such a type be added to Rust.
|
|
Co-authored-by: Adrian <adrian.iosdev@gmail.com>
|
|
Add a test to ensure issue #89699 does not show up again. This test
emits an `async move` closure in a proc macro, which is used in a
test program compiled with edition 2015. We make sure the error message
is nice and shows up properly.
|
|
|
|
`ErrorGuaranteed`, even if that error is only emitted by `check_modwitem_types`
|
|
Explaining something in the output that surprised me.
|
|
r=compiler-errors,estebank
Add a note to duplicate diagnostics
Helps explain why there may be a difference between manual testing and the test suite output and highlights them as something to potentially look into
For existing duplicate diagnostics I just blessed them other than a few files that had other `NOTE` annotations in
|
|
|
|
|
|
r=compiler-errors
Properly print cstr literals in `proc_macro::Literal::to_string`
Previously we printed the contents of the string, rather than the actual string literal (e.g. `the c string` instead of `c"the c string"`).
Fixes #112820
cc #105723
|
|
|
|
without this, the only way to create a `LitKind::Byte` is by
doing `"b'a'".parse::<Literal>()`, this solves that by enabling
`Literal::byte_character(b'a')`
|
|
|
|
Replace old private-in-public diagnostic with type privacy lints
Next part of RFC https://github.com/rust-lang/rust/issues/48054.
r? `@petrochenkov`
|
|
feat: `riscv-interrupt-{m,s}` calling conventions
Similar to prior support added for the mips430, avr, and x86 targets this change implements the rough equivalent of clang's [`__attribute__((interrupt))`][clang-attr] for riscv targets, enabling e.g.
```rust
static mut CNT: usize = 0;
pub extern "riscv-interrupt-m" fn isr_m() {
unsafe {
CNT += 1;
}
}
```
to produce highly effective assembly like:
```asm
pub extern "riscv-interrupt-m" fn isr_m() {
420003a0: 1141 addi sp,sp,-16
unsafe {
CNT += 1;
420003a2: c62a sw a0,12(sp)
420003a4: c42e sw a1,8(sp)
420003a6: 3fc80537 lui a0,0x3fc80
420003aa: 63c52583 lw a1,1596(a0) # 3fc8063c <_ZN12esp_riscv_rt3CNT17hcec3e3a214887d53E.0>
420003ae: 0585 addi a1,a1,1
420003b0: 62b52e23 sw a1,1596(a0)
}
}
420003b4: 4532 lw a0,12(sp)
420003b6: 45a2 lw a1,8(sp)
420003b8: 0141 addi sp,sp,16
420003ba: 30200073 mret
```
(disassembly via `riscv64-unknown-elf-objdump -C -S --disassemble ./esp32c3-hal/target/riscv32imc-unknown-none-elf/release/examples/gpio_interrupt`)
This outcome is superior to hand-coded interrupt routines which, lacking visibility into any non-assembly body of the interrupt handler, have to be very conservative and save the [entire CPU state to the stack frame][full-frame-save]. By instead asking LLVM to only save the registers that it uses, we defer the decision to the tool with the best context: it can more accurately account for the cost of spills if it knows that every additional register used is already at the cost of an implicit spill.
At the LLVM level, this is apparently [implemented by] marking every register as "[callee-save]," matching the semantics of an interrupt handler nicely (it has to leave the CPU state just as it found it after its `{m|s}ret`).
This approach is not suitable for every interrupt handler, as it makes no attempt to e.g. save the state in a user-accessible stack frame. For a full discussion of those challenges and tradeoffs, please refer to [the interrupt calling conventions RFC][rfc].
Inside rustc, this implementation differs from prior art because LLVM does not expose the "all-saved" function flavor as a calling convention directly, instead preferring to use an attribute that allows for differentiating between "machine-mode" and "superivsor-mode" interrupts.
Finally, some effort has been made to guide those who may not yet be aware of the differences between machine-mode and supervisor-mode interrupts as to why no `riscv-interrupt` calling convention is exposed through rustc, and similarly for why `riscv-interrupt-u` makes no appearance (as it would complicate future LLVM upgrades).
[clang-attr]: https://clang.llvm.org/docs/AttributeReference.html#interrupt-risc-v
[full-frame-save]: https://github.com/esp-rs/esp-riscv-rt/blob/9281af2ecffe13e40992917316f36920c26acaf3/src/lib.rs#L440-L469
[implemented by]: https://github.com/llvm/llvm-project/blob/b7fb2a3fec7c187d58a6d338ab512d9173bca987/llvm/lib/Target/RISCV/RISCVRegisterInfo.cpp#L61-L67
[callee-save]: https://github.com/llvm/llvm-project/blob/973f1fe7a8591c7af148e573491ab68cc15b6ecf/llvm/lib/Target/RISCV/RISCVCallingConv.td#L30-L37
[rfc]: https://github.com/rust-lang/rfcs/pull/3246
|
|
The change in 07f855d7817aa53af8adbb385407f6c2cacc2702 introduced a
trailing numeral of some kind after the `extern crate
compiler_builtins`, which appears to have caused at least two false
negatives (654b924 and 657fd24). Instead, this change normalizes the
test output to ignore the number (of symbols rustc recognizes?) to avoid
needing to re-`--bless` these two tests for unrelated changes.
|
|
pnkfelix:dont-export-no-mangle-from-proc-macros-issue-99978, r=bjorn3
Restrict linker version script of proc-macro crates to just its two symbols
Restrict linker version script of proc-macro crates to just the two symbols of each proc-macro crate.
The main known effect of doing this is to stop including `#[no_mangle]` symbols in the linker version script.
Background:
The combination of a proc-macro crate with an import of another crate that itself exports a no_mangle function was broken for a period of time, because:
* In PR #99944 we stopped exporting no_mangle symbols from proc-macro crates; proc-macro crates have a very limited interface and are meant to be treated as a blackbox to everything except rustc itself. However: he constructed linker version script still referred to them, but resolving that discrepancy was left as a FIXME in the code, tagged with issue #99978.
* In PR #108017 we started telling the linker to check (via the`--no-undefined-version` linker invocation flag) that every symbol referenced in the "linker version script" is provided as linker input. So the unresolved discrepancy from #99978 started surfacing as a compile-time error (e.g. #111888).
Fix #111888
Fix #99978.
|
|
the host.
thus we should no longer see test failures for e.g. wasm32 target.
|
|
|
|
Add separate feature gate for async fn track caller
This patch adds a feature gate `async_fn_track_caller` that is separate from `closure_track_caller`. This is to allow enabling `async_fn_track_caller` separately.
Fixes #110009
|
|
fix to test as proposed by wesleywiser
Co-authored-by: Wesley Wiser <wwiser@gmail.com>
|
|
|
|
This patch adds a feature gate `async_fn_track_caller` that is separate from `closure_track_caller`. This is to allow enabling `async_fn_track_caller` separately.
Fixes #110009
|
|
|
|
|
|
|
|
tests/ui/proc-macro/*: Migrate FIXMEs to check-pass
proc-macros are processed early in the compiler pipeline. There is no need to involve codegen. So change to check-pass.
I have also looked through each changed test and to me it is sufficiently clear that codegen is not needed for the purpose of the test.
I skipped changing `tests/ui/proc-macro/no-missing-docs.rs` in this commit because it was not clear to me that it can be changed to check-pass.
Part of #62277
|
|
proc-macros are processed early in the compiler pipeline. There is no
need to involve codegen. So change to check-pass.
I have also looked through each changed test and to me it is
sufficiently clear that codegen is not needed for the purpose of the
test.
I skipped changing tests/ui/proc-macro/no-missing-docs.rs in this commit
because it was not clear to me that it can be changed to check-pass.
|
|
|
|
This crate is a private implementation detail. We only need to insert it
into the crate graph for linking and should not expose any of its public
API.
Fixes #113533
|
|
|
|
Implement proposed API for `proc_macro_span`
As proposed in [#54725 (comment)](https://github.com/rust-lang/rust/issues/54725#issuecomment-1546918161). I have omitted the byte-level API as it's already available as [`Span::byte_range`](https://doc.rust-lang.org/nightly/proc_macro/struct.Span.html#method.byte_range).
`@rustbot` label +A-proc-macros
r? `@m-ou-se`
|
|
Make compiletest aware of targets without dynamic linking
Some parts of the compiletest internals and some tests require dynamic linking to work, which is not supported by all targets. Before this PR, this was handled by if branches matching on the target name.
This PR loads whether a target supports dynamic linking or not from the target spec, and adds a `// needs-dynamic-linking` attribute for tests that require it. Note that I was not able to replace all the old conditions based on the target name, as some targets have `dynamic_linking: true` in their spec but pretend they don't have it in compiletest.
Also, to get this to work I had to *partially* revert #111472 (cc `@djkoloski` `@tmandry` `@bjorn3).` On one hand, only the target spec contains whether a target supports dynamic linking, but on the other hand a subset of the fields can be overridden through `-C` flags (as far as I'm aware only `-C panic=$strategy`). The solution I came up with is to take the target spec as the base, and then override the panic strategy based on `--print=cfg`. Hopefully that should not break y'all again.
|
|
Suggest publicly accessible paths for items in private mod:
When encountering a path in non-import situations that are not reachable
due to privacy constraints, search for any public re-exports that the
user could use instead.
Track whether an import suggestion is offering a re-export.
When encountering a path with private segments, mention if the item at
the final path segment is not publicly accessible at all.
Add item visibility metadata to privacy errors from imports:
On unreachable imports, record the item that was being imported in order
to suggest publicly available re-exports or to be explicit that the item
is not available publicly from any path.
In order to allow this, we add a mode to `resolve_path` that will not
add new privacy errors, nor return early if it encounters one. This way
we can get the `Res` corresponding to the final item in the import,
which is used in the privacy error machinery.
|
|
|
|
|
|
|
|
Make "consider importing" consistent for macros
Fixes #112439
|
|
|
|
|
|
Suggest using integration tests for test crate using own proc-macro
cc #110247
|
|
|
|
|
