| Age | Commit message (Collapse) | Author | Lines |
|---|
|
try_question_mark_nop: update test for LLVM 20
llvm/llvm-project@dd116369f646d023a2e7e5c145a1bed5dcf9a45c changes the IR of this test in a way that I don't think is bad, but needs adjusting.
r? `@nikic`
`@rustbot` label: +llvm-main
|
|
pointee_info_at: fix logic for recursing into enums
Fixes https://github.com/rust-lang/rust/issues/131834
The logic in `pointee_info_at` was likely written at a time when the null pointer optimization was the *only* enum layout optimization -- and as `Variant::Multiple` kept getting expanded, nobody noticed that the logic is now unsound.
The job of this function is to figure out whether there is a dereferenceable-or-null and aligned pointer at a given offset inside a type. So when we recurse into a multi-variant enum, we better make sure that all the other enum variants must be null! This is the part that was forgotten, and this PR adds it.
The reason this didn't explode in many ways so far is that our references only have 1 niche value (null), so it's not possible on stable to have a multi-variant enum with a dereferenceable pointer and other enum variants that are not null. But with `rustc_layout_scalar_valid_range` attributes one can force such a layout, and if `@the8472's` work on alignment niches ever lands, that will make this possible on stable.
|
|
Add v9, v8plus, and leoncasa target feature to sparc and use v8plus in create_object_file
This adds the following three unstable target features:
- `v9`: SPARC-V9 instructions ([LLVM definition][sparc-v9])
- Relevant to https://github.com/rust-lang/rust/pull/131222#issuecomment-2453310963
- Relevant to https://github.com/rust-lang/rust/pull/132472#discussion_r1832606081
- This is also needed to implement https://github.com/taiki-e/atomic-maybe-uninit/pull/31 (depends on inline assembly support) more robustly.
- `v8plus`: SPARC-V8+ ABI ([LLVM definition][sparc-v8plus])
- This is added in LLVM 20. In LLVM 19 and older, it is emulated to work the same way as LLVM in each LLVM version.
- See https://github.com/rust-lang/rust/issues/132585#issuecomment-2453926257 for more.
- `leoncasa`: CASA instruction[^1] of LEON3 and LEON4 processors ([LLVM definition][sparc-leoncasa], LLVM feature name: `hasleoncasa`)
- This is needed to implement https://github.com/taiki-e/atomic-maybe-uninit/pull/31 (depends on inline assembly support) more robustly.
[^1]: Atomic CAS instruction
[sparc-v9]: https://github.com/llvm/llvm-project/blob/f5e4ffaa49254706ad6fa209de8aec28e20f0041/llvm/lib/Target/Sparc/Sparc.td#L37-L39
[sparc-v8plus]: https://github.com/llvm/llvm-project/blob/f5e4ffaa49254706ad6fa209de8aec28e20f0041/llvm/lib/Target/Sparc/Sparc.td#L37-L39
[sparc-leoncasa]: https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/Sparc/LeonFeatures.td#L32-L37
|
|
use verbose for path separator suggestion
A single `-` of suggestion underlining that is adjacent to a much more significant `^^^` underlying of the LHS path component is hard to distinguish. IMO this presents much more cleanly when it's verbose, especially because it's a *replacment* suggestion.
r? estebank
|
|
Don't suggest `.into_iter()` on iterators
This makes the the suggestion to call `.into_iter()` only consider unsatisfied `Iterator` bounds for the receiver type itself. That way, it ignores predicates generated by trying to auto-ref the receiver (the result of which usually won't implement `Iterator`).
Fixes #127511
Unfortunately, the error in that case is still confusing: it labels `Iterator` as an unsatisfied bound because `&impl Iterator: Iterator` can't be satisfied, despite that not being required or helpful. I'd like to handle that in a separate PR. ~~I'm hoping fixing #124802 will fix it too.~~ It doesn't look connected to that issue. Still, I think it'd be clearest to visually distinguish unsatisfied predicates from different attempts at `pick_method`; I'll make a PR for that soon.
|
|
Get rid of `check_opaque_type_well_formed`
Instead, replicate it by improving the span of the opaque in `check_opaque_meets_bounds`.
This has two consequences:
1. We now prefer "concrete type differs" errors, since we'll hit those first before we check the opaque is WF.
2. Spans have gotten slightly worse.
Specifically, (2.) could be improved by adding a new obligation cause that explains that the definition's environment has stronger assumptions than the declaration.
r? lcnr
|
|
|
|
|
|
|
|
|
|
llvm/llvm-project@dd116369f646d023a2e7e5c145a1bed5dcf9a45c changes the
IR of this test in a way that I don't think is bad, but needs adjusting.
r? @nikic
@rustbot label: +llvm-main
|
|
remove support for rustc_safe_intrinsic attribute; use rustc_intrinsic functions instead
This brings us one step closer towards removing support for `extern "rust-intrinsic"` blocks, in favor of `#[rustc_intrinsic]` functions.
Also move `#[rustc_intrinsic]` under the `intrinsics` feature gate, to match the `extern "rust-intrinsic"` style.
|
|
functions instead
|
|
Initialize channel `Block`s directly on the heap
The channel's `Block::new` was causing a stack overflow because it held
32 item slots, instantiated on the stack before moving to `Box::new`.
The 32x multiplier made modestly-large item sizes untenable.
That block is now initialized directly on the heap.
Fixes #102246
try-job: test-various
|
|
[StableMIR] A few fixes to pretty printing
Improve identation, and a few other rvalue printing
try-job: x86_64-msvc
try-job: test-various
|
|
|
|
|
|
|
|
Rollup of 10 pull requests
Successful merges:
- #130586 (Set "symbol name" in raw-dylib import libraries to the decorated name)
- #131913 (Add `{ignore,needs}-{rustc,std}-debug-assertions` directive support)
- #132095 (Fix #131977 parens mangled in shared mut static lint suggestion)
- #132131 ([StableMIR] API to retrieve definitions from crates)
- #132639 (core: move intrinsics.rs into intrinsics folder)
- #132696 (Compile `test_num_f128` conditionally on `reliable_f128_math` config)
- #132737 (bootstrap: Print better message if lock pid isn't available)
- #132739 (Fix `librustdoc/scrape_examples.rs` formatting)
- #132740 (Update test for LLVM 20's new vector splat syntax)
- #132741 (Update mips64 data layout to match LLVM 20 change)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
Update test for LLVM 20's new vector splat syntax
that was introduced in https://github.com/llvm/llvm-project/pull/112548
|
|
core: move intrinsics.rs into intrinsics folder
This makes the rustbot notification we have set up for this folder in `triagebot.toml` actually work. Also IMO it makes more sense to have it all in one folder.
|
|
[StableMIR] API to retrieve definitions from crates
Add functions to retrieve function definitions and static items from all crates (local and external).
For external crates, we're still missing items from trait implementation and primitives.
r? ````@compiler-errors:```` Do you know what is the best way to retrieve the associated items for primitives and trait implementations for external crates? Thanks!
|
|
Fix #131977 parens mangled in shared mut static lint suggestion
Resolves #131977 for static mut references after discussion with
Esteban & Jieyou on [t-compiler/help](https://rust-lang.zulipchat.com/#narrow/channel/182449-t-compiler.2Fhelp/topic/linting.20with.20parens.20in.20the.20HIR).
This doesn't do anything to change the underlying issue if there are other expressions that generate lint suggestions which need to be applied within parentheses.
|
|
Add `{ignore,needs}-{rustc,std}-debug-assertions` directive support
Add `{ignore,needs}-{rustc,std}-debug-assertions` compiletest directives and retire the old `{ignore,only}-debug` directives. The old `{ignore,only}-debug` directives were ambiguous because you could have std built with debug assertions but rustc not built with debug assertions or vice versa. If we want to support the use case of controlling test run based on if rustc was built with debug assertions, then having `{ignore,only}-debug` will be very confusing.
cc ````@matthiaskrgr````
Closes #123987.
r? bootstrap (or compiler tbh)
|
|
|
|
Tweak detection of multiple crate versions to be more encompassing
Previously, we only emitted the additional context if the type was in the same crate as the trait that appeared multiple times in the dependency tree. Now, we look at all traits looking for two with the same name in different crates with the same crate number, and we are more flexible looking for the types involved. This will work even if the type that implements the wrong trait version is from a different crate entirely.
```
error[E0277]: the trait bound `CustomErrorHandler: ErrorHandler` is not satisfied because the trait comes from a different crate version
--> src/main.rs:5:17
|
5 | cnb_runtime(CustomErrorHandler {});
| ^^^^^^^^^^^^^^^^^^^^^ the trait `ErrorHandler` is not implemented for `CustomErrorHandler`
|
note: there are multiple different versions of crate `c` in the dependency graph
--> /home/gh-estebank/testcase-rustc-crate-version-mismatch/c-v0.2/src/lib.rs:1:1
|
1 | pub trait ErrorHandler {}
| ^^^^^^^^^^^^^^^^^^^^^^ this is the required trait
|
::: src/main.rs:1:5
|
1 | use b::CustomErrorHandler;
| - one version of crate `c` is used here, as a dependency of crate `b`
2 | use c::cnb_runtime;
| - one version of crate `c` is used here, as a direct dependency of the current crate
|
::: /home/gh-estebank/testcase-rustc-crate-version-mismatch/b/src/lib.rs:1:1
|
1 | pub struct CustomErrorHandler {}
| ----------------------------- this type doesn't implement the required trait
|
::: /home/gh-estebank/testcase-rustc-crate-version-mismatch/c-v0.1/src/lib.rs:1:1
|
1 | pub trait ErrorHandler {}
| ---------------------- this is the found trait
= note: two types coming from two different versions of the same crate are different types even if they look the same
= help: you can use `cargo tree` to explore your dependency tree
```
Fix #89143.
|
|
Improve identation, and a few other rvalue printing
|
|
Add functions to retrieve function definitions and static items from
all crates (local and external).
For external crates, add a query to retrieve the number of defs in a
foreign crate.
|
|
Basic inline assembly support for SPARC and SPARC64
This implements asm_experimental_arch (tracking issue https://github.com/rust-lang/rust/issues/93335) for SPARC and SPARC64.
This PR includes:
- General-purpose registers `r[0-31]` (`reg` register class, LLVM/GCC constraint `r`)
Supported types: i8, i16, i32, i64 (SPARC64-only)
Aliases: `g[0-7]` (`r[0-7]`), `o[0-7]` (`r[8-15]`), `l[0-7]` (`r[16-23]`), `i[0-7]` (`r[24-31]`)
- `y` register (clobber-only, needed for clobber_abi)
- preserves_flags: Integer condition codes (`icc`, `xcc`) and floating-point condition codes (`fcc*`)
The following are *not* included:
- 64-bit integer support on SPARC-V8+'s global or out registers (`g[0-7]`, `o[0-7]`): GCC's `h` constraint (it seems that there is no corresponding constraint in LLVM?)
- Floating-point registers (LLVM/GCC constraint `e`/`f`):
I initially tried to implement this, but postponed it for now because there seemed to be several parts in LLVM that behaved differently than in the LangRef's description.
- clobber_abi: Support for floating-point registers is needed.
Refs:
- LLVM
- Reserved registers https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/Sparc/SparcRegisterInfo.cpp#L52
- Register definitions https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/Sparc/SparcRegisterInfo.td
- Supported constraints https://llvm.org/docs/LangRef.html#supported-constraint-code-list
- GCC
- Reserved registers https://github.com/gcc-mirror/gcc/blob/63b6967b06b5387821c4e5f2c113da6aaeeae2b7/gcc/config/sparc/sparc.h#L633-L658
- Supported constraints https://gcc.gnu.org/onlinedocs/gcc/Machine-Constraints.html
- SPARC ISA/ABI
- (64-bit ISA) The SPARC Architecture Manual, Version 9
(32-bit ISA) The SPARC Architecture Manual, Version 8
(64-bit ABI) System V Application Binary Interface SPARC Version 9 Processor Supplement, Rev 1.35
(32-bit ABI) System V Application Binary Interface SPARC Processor Supplement, Third Edition
The above docs can be downloaded from https://sparc.org/technical-documents
- (32-bit V8+ ABI) The V8+ Technical Specification
https://temlib.org/pub/SparcStation/Standards/V8plus.pdf
cc `@thejpster` (sparc-unknown-none-elf target maintainer)
(AFAIK, other sparc/sprac64 targets don't have target maintainers)
r? `@Amanieu`
`@rustbot` label +O-SPARC +A-inline-assembly
|
|
|
|
```
error[E0277]: the trait bound `dep_2_reexport::Type: Trait` is not satisfied because the trait comes from a different crate version
--> multiple-dep-versions.rs:7:18
|
7 | do_something(Type);
| ^^^^ the trait `Trait` is not implemented for `dep_2_reexport::Type`
|
note: there are multiple different versions of crate `dependency` in the dependency graph
--> /home/gh-estebank/rust/build/x86_64-unknown-linux-gnu/test/run-make/crate-loading/rmake_out/multiple-dep-versions-1.rs:4:1
|
3 | pub struct Type(pub i32);
| --------------- this type implements the required trait
4 | pub trait Trait {
| ^^^^^^^^^^^^^^^ this is the required trait
|
::: multiple-dep-versions.rs:1:1
|
1 | extern crate dep_2_reexport;
| ---------------------------- one version of crate `dependency` is used here, as a dependency of crate `foo`
2 | extern crate dependency;
| ------------------------ one version of crate `dependency` is used here, as a direct dependency of the current crate
|
::: /home/gh-estebank/rust/build/x86_64-unknown-linux-gnu/test/run-make/crate-loading/rmake_out/multiple-dep-versions-2.rs:3:1
|
3 | pub struct Type;
| --------------- this type doesn't implement the required trait
4 | pub trait Trait {
| --------------- this is the found trait
= note: two types coming from two different versions of the same crate are different types even if they look the same
= help: you can use `cargo tree` to explore your dependency tree
```
The approach to accomplish this is a HACK, and we'd want a better way to do this. I believe that moving E0277 to be a structured diagnostic would help in that regard.
|
|
```
error[E0277]: the trait bound `dep_2_reexport::Type: Trait` is not satisfied because the trait comes from a different crate version
--> multiple-dep-versions.rs:7:18
|
7 | do_something(Type);
| ^^^^ the trait `Trait` is not implemented for `dep_2_reexport::Type`
|
note: there are multiple different versions of crate `dependency` in the dependency graph
--> /home/gh-estebank/rust/build/x86_64-unknown-linux-gnu/test/run-make/crate-loading/rmake_out/multiple-dep-versions-1.rs:4:1
|
3 | pub struct Type(pub i32);
| --------------- this type implements the required trait
4 | pub trait Trait {
| ^^^^^^^^^^^^^^^ this is the required trait
|
::: multiple-dep-versions.rs:1:1
|
1 | extern crate dep_2_reexport;
| ---------------------------- one version of crate `dependency` is used here, as a dependency of crate `foo`
2 | extern crate dependency;
| ------------------------ one version of crate `dependency` is used here, as a direct dependency of the current crate
|
::: /home/gh-estebank/rust/build/x86_64-unknown-linux-gnu/test/run-make/crate-loading/rmake_out/multiple-dep-versions-2.rs:3:1
|
3 | pub struct Type;
| --------------- this type doesn't implement the required trait
4 | pub trait Trait {
| --------------- this is the found trait
= note: two types coming from two different versions of the same crate are different types even if they look the same
= help: you can use `cargo tree` to explore your dependency tree
note: required by a bound in `do_something`
--> /home/gh-estebank/rust/build/x86_64-unknown-linux-gnu/test/run-make/crate-loading/rmake_out/multiple-dep-versions-1.rs:12:24
|
12 | pub fn do_something<X: Trait>(_: X) {}
| ^^^^^ required by this bound in `do_something`
```
|
|
Previously, we only emitted the additional context if the type was in the same crate as the trait that appeared multiple times in the dependency tree. Now, we look at all traits looking for two with the same name in different crates with the same crate number, and we are more flexible looking for the types involved. This will work even if the type that implements the wrong trait version is from a different crate entirely.
```
error[E0277]: the trait bound `CustomErrorHandler: ErrorHandler` is not satisfied
--> src/main.rs:5:17
|
5 | cnb_runtime(CustomErrorHandler {});
| ----------- ^^^^^^^^^^^^^^^^^^^^^ the trait `ErrorHandler` is not implemented for `CustomErrorHandler`
| |
| required by a bound introduced by this call
|
help: you have multiple different versions of crate `c` in your dependency graph
--> src/main.rs:1:5
|
1 | use b::CustomErrorHandler;
| ^ one version of crate `c` is used here, as a dependency of crate `b`
2 | use c::cnb_runtime;
| ^ one version of crate `c` is used here, as a direct dependency of the current crate
note: two types coming from two different versions of the same crate are different types even if they look the same
--> /home/gh-estebank/testcase-rustc-crate-version-mismatch/c-v0.2/src/lib.rs:1:1
|
1 | pub trait ErrorHandler {}
| ^^^^^^^^^^^^^^^^^^^^^^ this is the required trait
|
::: /home/gh-estebank/testcase-rustc-crate-version-mismatch/b/src/lib.rs:1:1
|
1 | pub struct CustomErrorHandler {}
| ----------------------------- this type doesn't implement the required trait
|
::: /home/gh-estebank/testcase-rustc-crate-version-mismatch/c-v0.1/src/lib.rs:1:1
|
1 | pub trait ErrorHandler {}
| ---------------------- this is the found trait
= help: you can use `cargo tree` to explore your dependency tree
note: required by a bound in `cnb_runtime`
--> /home/gh-estebank/testcase-rustc-crate-version-mismatch/c-v0.2/src/lib.rs:3:41
|
3 | pub fn cnb_runtime(_error_handler: impl ErrorHandler) {}
| ^^^^^^^^^^^^ required by this bound in `cnb_runtime`
```
Fix #89143.
|
|
that was introduced in https://github.com/llvm/llvm-project/pull/112548
|
|
The channel's `Block::new` was causing a stack overflow because it held
32 item slots, instantiated on the stack before moving to `Box::new`.
The 32x multiplier made modestly-large item sizes untenable.
That block is now initialized directly on the heap.
Fixes #102246
|
|
|
|
|
|
Add --diagnostic-width to some tests failing after 1a0c5021838
Otherwise the tests would fail depending on the execution environment.
|
|
more crash tests
r? `@jieyouxu`
|
|
|
|
Otherwise the tests would fail depending on the execution environment.
|
|
Rollup of 3 pull requests
Successful merges:
- #132617 (Fix an extra newline in rendered std doc)
- #132698 (Remove unneeded fields in `scrape_examples::FindCalls`)
- #132700 (add note not to re-report crashes from `crashes` tests)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
add note not to re-report crashes from `crashes` tests
for reasons... :sweat_smile:
r? `@fmease`
|
|
|
|
|
|
Suggest swapping LHS and RHS when RHS impls `PartialEq<lhs_ty>`
Closes: #130495
r? `@fee1-dead`
|
|
Tweak E0320 overflow error wording
Surround type with backticks as we should in every error.
|
|
Rollup of 5 pull requests
Successful merges:
- #131261 (Stabilize `UnsafeCell::from_mut`)
- #131405 (bootstrap/codegen_ssa: ship llvm-strip and use it for -Cstrip)
- #132077 (Add a new `wide-arithmetic` feature for WebAssembly)
- #132562 (Remove the `wasm32-wasi` target from rustc)
- #132660 (Remove unused errs.rs file)
Failed merges:
- #131721 (Add new unstable feature `const_eq_ignore_ascii_case`)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
Remove the `wasm32-wasi` target from rustc
This commit is the final step in the journey of renaming the historical `wasm32-wasi` target in the Rust compiler to `wasm32-wasip1`. Various steps in this journey so far have been:
* 2023-04-03: rust-lang/compiler-team#607 - initial proposal for this rename
* 2024-11-27: rust-lang/compiler-team#695 - amended schedule/procedure for rename
* 2024-01-29: rust-lang/rust#120468 - initial introduction of `wasm32-wasip1`
* 2024-06-18: rust-lang/rust#126662 - warn on usage of `wasm32-wasi`
* 2024-11-08: this PR - remove the `wasm32-wasi` target
The full transition schedule is in [this comment][comment] and is summarized with:
* 2024-05-02: Rust 1.78 released with `wasm32-wasip1` target
* 2024-09-05: Rust 1.81 released warning on usage of `wasm32-wasi`
* 2025-01-09: Rust 1.84 to be released without the `wasm32-wasi` target
This means that support on stable for the replacement target of `wasm32-wasip1` has currently been available for 6 months. Users have already seen warnings on stable for 2 months about usage of `wasm32-wasi` and stable users have another 2 months of warnings before the target is removed from stable.
This commit is intended to be the final step in this transition so the source tree should no longer mention `wasm32-wasi` except in historical reference to the older name of the `wasm32-wasip1` target.
[comment]: https://github.com/rust-lang/rust/pull/120468#issuecomment-1977878747
|
|
Add a new `wide-arithmetic` feature for WebAssembly
This commit adds a new rustc target feature named `wide-arithmetic` for WebAssembly targets. This corresponds to the [wide-arithmetic] proposal for WebAssembly which adds new instructions catered towards accelerating integer arithmetic larger than 64-bits. This proposal to WebAssembly is not standard yet so this new feature is flagged as an unstable target feature. Additionally Rust's LLVM version doesn't support this new feature yet since support will first be added in LLVM 20, so the feature filtering logic for LLVM is updated to handle this.
I'll also note that I'm not currently planning to add wasm-specific intrinsics to `std::arch::wasm32` at this time. The currently proposed instructions are all accessible through `i128` or `u128`-based operations which Rust already supports, so intrinsic shouldn't be necessary to get access to these new instructions.
[wide-arithmetic]: https://github.com/WebAssembly/wide-arithmetic
|
