| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Add jump to doc
I'm using the source code pages of the compiler quite a lot, but one thing missing is the possibility to jump back from the source code to the item documentation. Since I also got a few others complaining about it, I think it's fine to add it since this option is nightly only.
This PR adds a link to jump back to item's documentation on the item definition (so on `Bar` in `struct Bar {... }`, as described in the unofficial [RFC](https://github.com/GuillaumeGomez/rfcs/blob/rustdoc-jump-to-definition/text/000-rustdoc-jump-to-definition.md)).
r? ````@notriddle````
|
|
Test simd-wide-sum for codegen error
This adds the necessary test infrastructure to "build-pass" codegen tests, for the purpose of doing that for a single revision of a codegen test. When mir-opts are tested, the output may vary from the usual, and maybe for positive reasons... but we don't necessarily want to output such bad LLVMIR that LLVM starts crashing on it.
Currently when enabling MIR opts at higher levels this LLVMIR is still emitted, but it was previously disabled for getting in mir-opt's way and as this new revision without `// [mir-opt3]build-pass` would make it more likely to, I would like to not see the testing for the actual results regress again just because it was bundled with an ICE check as well.
This fixes https://github.com/rust-lang/rust/issues/98016
|
|
Implement selection for `Unsize` for better coercion behavior
In order for much of coercion to succeed, we need to be able to deal with partial ambiguity of `Unsize` traits during selection. However, I pessimistically implemented selection in the new trait solver to just bail out with ambiguity if it was a built-in impl:
https://github.com/rust-lang/rust/blob/9227ff28aff55b252314076fcf21c9a66f10ac1e/compiler/rustc_trait_selection/src/solve/eval_ctxt/select.rs#L126
This implements a proper "rematch" procedure for dealing with built-in `Unsize` goals, so that even if the goal is ambiguous, we are able to get nested obligations which are used in the coercion selection-like loop:
https://github.com/rust-lang/rust/blob/9227ff28aff55b252314076fcf21c9a66f10ac1e/compiler/rustc_hir_typeck/src/coercion.rs#L702
Second commit just moves a `resolve_vars_if_possible` call to fix a bug where we weren't detecting a trait upcasting to occur.
r? ``@lcnr``
|
|
|
|
r=oli-obk
(re-)tighten sourceinfo span of adjustments in MIR
Diagnostics rely on the spans of MIR statements being (approximately) correct in order to give suggestions relative to that span (i.e. `shrink_to_hi` and `shrink_to_lo`).
I discovered that we're *intentionally* lowering THIR exprs with their parent expr's span if they come from adjustments that are due to a parent expression. While I understand why that may be desirable to demonstrate the relationship of an adjustment and the expression that requires it, it leads to
1. very verbose borrowck output
2. incorrect spans for suggestions
Some diagnostics get around that by giving suggestions relative to other spans we've collected during MIR lowering, such as the span of the method's identifier (e.g. `name` in `.name()`), but this doesn't work too well when things come from desugaring.
I assume it also has lead to numerous tweaks and complications to diagnostics code down the road, which this PR doesn't necessarily aim to fix but may open the gates to fixing later... The last three commits are simplifications due to the fact that we can assume that the move span actually points to what is being moved (and a test).
This regressed in #89110, which was debated somewhat in #90286. cc `@Aaron1011` who originally made this change.
r? diagnostics
Fixes #113547
Fixes #111016
|
|
While let suggestion will work for closure body
Fixes #113354
|
|
various download-rustc fixes
separated out from https://github.com/rust-lang/rust/pull/112143 because it keeps getting stuck in limbo.
best reviewed commit-by-commit
|
|
Not only are they a pain to update, but they differ depending on whether `parallel-rustc` is enabled or not
|
|
|
|
|
|
Rollup of 4 pull requests
Successful merges:
- #112717 (Implement a few more rvalue translation to smir)
- #113310 (Don't suggest `impl Trait` in path position)
- #113497 (Support explicit 32-bit MIPS ABI for the synthetic object)
- #113560 (Lint against misplaced where-clauses on associated types in traits)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
r=compiler-errors
Lint against misplaced where-clauses on associated types in traits
Extends the scope of the lint `deprecated_where_clause_location` (#89122) from associated types in impls to associated types in any location (impl or trait). This is only relevant for `#![feature(associated_type_defaults)]`. Previously we didn't warn on the following code for example:
```rs
#![feature(associated_type_defaults)]
trait Trait { type Assoc where u32: Copy = (); }
```
Personally I would've preferred to emit a *hard* error here instead of a lint warning since the feature is unstable but unfortunately we are constrained by back compat as associated type defaults won't necessarily trigger the feature-gate error if they are inside of a macro call (since they use a post-expansion feature-gate due to historical reasons, see also #66004).
I've renamed and moved related preexisting tests: 1. They test AST validation passes not the parser & thus shouldn't live in `parser/` (historical reasons?). 2. One test file was named after type aliases even though it tests assoc tys.
`@rustbot` label A-lint
|
|
Don't suggest `impl Trait` in path position
Fixes #113264.
|
|
r=lcnr
Structurally resolve in pattern matching when peeling refs in new solver
Let me know if you want me to commit the minimized test:
```rust
fn test() {}
fn test2() {}
fn main() {
let tests: &[(_, fn())] = &[
("test", test),
("test2", test2),
];
for (a, b) in tests {
todo!();
}
}
```
In that test above, the match scrutinee is `<std::vec::Iter<(&'static str, fn())> as Iterator>::Item`, which we cannot peel the refs from.
We also need to structurally resolve in the loop, since structural resolve is inherently shallow. I haven't come up with a test where this matters, but I can if you care.
Also, I removed two other calls to `resolve_vars_with_obligations` in diagnostics code that I'm pretty convinced are not useful.
r? `@lcnr`
|
|
|
|
r=compiler-errors
Enable coinduction support for Safe Transmute
This patch adds the `#[rustc_coinductive]` annotation to `BikeshedIntrinsicFrom`, so that it's possible to compute transmutability for recursive types.
## Motivation
Safe Transmute currently already supports references (#110662). However, if a type is implemented recursively, it leads to an infinite loop when we try to check if transmutation is safe.
A couple simple examples that one might want to write, that are currently not possible to check transmutability for:
```rs
#[repr(C)] struct A(&'static B);
#[repr(C)] struct B(&'static A);
```
```rs
#[repr(C)]
enum IList<'a> { Nil, Cons(isize, &'a IList<'a>) }
#[repr(C)]
enum UList<'a> { Nil, Cons(usize, &'a UList<'a>) }
```
Previously, `@jswrenn` was considering writing a co-inductive solver from scratch, just for the `rustc_tranmsute` crate. Later on as I started working on Safe Transmute myself, I came across the `#[rustc_coinductive]` annotation, which is currently only being used for the `Sized` trait. Leveraging this trait actually solved the problem entirely, and it saves a lot of duplicate work that would have had to happen in `rustc_transmute`.
|
|
Uplift `clippy::fn_null_check` lint
This PR aims at uplifting the `clippy::fn_null_check` lint into rustc.
## `incorrect_fn_null_checks`
(warn-by-default)
The `incorrect_fn_null_checks` lint checks for expression that checks if a function pointer is null.
### Example
```rust
let fn_ptr: fn() = /* somehow obtained nullable function pointer */
if (fn_ptr as *const ()).is_null() { /* ... */ }
```
### Explanation
Function pointers are assumed to be non-null, checking for their nullity is incorrect.
-----
Mostly followed the instructions for uplifting a clippy lint described here: https://github.com/rust-lang/rust/pull/99696#pullrequestreview-1134072751
`@rustbot` label: +I-lang-nominated
r? compiler
|
|
|
|
|
|
|
|
|
|
|
|
Replace RPITIT current impl with new strategy that lowers as a GAT
This PR replaces the current implementation of RPITITs with the new implementation that we had under -Zlower-impl-trait-in-trait-to-assoc-ty flag that lowers the RPIT as a GAT on the trait and on the impls that implement that trait.
Opening this PR as a draft because this goes after #112682, ~#112981~ and ~#112983~.
As soon as those are merged, I can rebase and we should run perf, crater and test a lot.
r? `@compiler-errors`
|
|
|
|
r=estebank
Add filter with following segment while lookup typo for path
From the discussion: https://github.com/rust-lang/rust/pull/112917#discussion_r1239150173
Seems we can not get the assoc items for `Struct`, `Enum` in the resolving phase.
A obvious filter is avoid suggesting the same name with the following segment path.
Use `following_seg` can extend the function `smart_resolve_partial_mod_path_errors` for more scenarios, such as `std::sync_error::atomic::AtomicBool` in test case.
r? `@estebank`
|
|
Set error handler output format as soon as possible
Should fix https://github.com/rust-lang/rust/pull/112692#issuecomment-1611585904.
|
|
Re-enable some coverage tests on Linux
These tests were originally disabled (on all platforms) in #110393, because those changes had made them start failing on Linux for unclear reasons.
I tried to re-enable them unconditionally in #111179, since they worked locally on my Mac, but I found that they were still failing on Linux, so I gave up at that time.
Later while working on #112300 I was able to re-enable them on Windows and Mac, since those changes made it possible to add specific `ignore-` directives to individual tests. I noticed at the time that the tests actually seemed to be working again on Linux, but by that point I didn't want to risk more CI failures, so I left them disabled on Linux with an intention to re-enable them later.
Now I'm going back to re-enable them on Linux too, since they seem to work fine.
---
Because `run-coverage` tests are sensitive to line numbers, and `x test tidy` doesn't like leading blank lines, I've replaced the old comment/ignore with an informative comment that occupies the same number of lines.
|
|
Remove `default_free_fn` feature
Closes #73014
r? ``@Amanieu``
|
|
r=Mark-Simulacrum
Add Tests for native wasm exceptions
### Motivation
In PR #111322, I added support for native WASM exceptions. I was asked by ``@davidtwco`` to add some tests for it in a follow up PR, which seems like a very good idea.
This PR adds three tests for this feature:
* codegen: ensure the correct LLVM instructions are used
* assembly: ensure the correct WASM instructions are used
* run-make: ensure the exception handling works; the WASM code is run using a small nodejs script which demonstrates the exception handling
### Complications
There are a few changes beside adding the tests, which were necessary
* Tests for the wasm32-unknown-unknown target are (as far as I know) only run on `test-various`. Its docker image uses nodejs-15, which is very old. Experimental support for wasm-exceptions was added in nodejs16. In nodejs 18.12 (LTS), they are stable.
- --> increase nodejs to 18.12 in `test-various`
* codegen/assembly tests are not performed for the wasm32-unknown-unknown target yet
- --> add those to `test-various` as well
Due to the last point, some tests are run which have not run before (assembly+codegen tests for wasm32-unknown-unknown). I added `// ignore wasm32-bare` for those which failed
### Local testing
I run all tests locally using both `test-various` and `wasm32`. As far as I know, none of the other systems run any test for wasm32 targets.
|
|
Always name the return place.
MIR opts more and more consider `_0` as just another local, so there is no point in keeping the special case in debug-info logic.
|
|
|
|
Rollup of 6 pull requests
Successful merges:
- #113005 (Don't call `query_normalize` when reporting similar impls)
- #113064 (std: edit [T]::swap docs)
- #113138 (Add release notes for 1.71.0)
- #113217 (resolve typerelative ctors to adt)
- #113254 (Use consistent formatting in Readme)
- #113482 (Migrate GUI colors test to original CSS color format)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
Migrate GUI colors test to original CSS color format
Follow-up of https://github.com/rust-lang/rust/pull/111459.
r? ``@notriddle``
|
|
r=cjgillot
resolve typerelative ctors to adt
Associated issue: #110508
r? ``@spastorino``
|
|
Don't call `query_normalize` when reporting similar impls
Firstly, It's sketchy to be using `query_normalize` at all during HIR typeck -- it's asking for an ICE 😅. Secondly, we're normalizing an impl trait ref that potentially has parameter types in `ty::ParamEnv::empty()`, which is kinda sketchy as well.
The only UI test change from removing this normalization is that we don't evaluate anonymous constants in impls, which end up giving us really ugly suggestions:
```
error[E0277]: the trait bound `[X; 35]: Default` is not satisfied
--> /home/gh-compiler-errors/test.rs:4:5
|
4 | <[X; 35] as Default>::default();
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ the trait `Default` is not implemented for `[X; 35]`
|
= help: the following other types implement trait `Default`:
&[T]
&mut [T]
[T; 32]
[T; core::::array::{impl#30}::{constant#0}]
[T; core::::array::{impl#31}::{constant#0}]
[T; core::::array::{impl#32}::{constant#0}]
[T; core::::array::{impl#33}::{constant#0}]
[T; core::::array::{impl#34}::{constant#0}]
and 27 others
```
So just fold the impls with a `BottomUpFolder` that calls `ty::Const::eval`. This doesn't work totally correctly with generic-const-exprs, but it's fine for stable code, and this is error reporting after all.
|
|
Rollup of 7 pull requests
Successful merges:
- #112931 (Enable zlib in LLVM on aarch64-apple-darwin)
- #113158 (tests: unset `RUSTC_LOG_COLOR` in a test)
- #113173 (CI: include workflow name in concurrency group)
- #113335 (Reveal opaques in new solver)
- #113390 (CGU formation tweaks)
- #113399 (Structurally normalize again for byte string lit pat checking)
- #113412 (Add basic types to SMIR)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
Add basic types to SMIR
Still incomplete but I think this can be merged and we can keep iterating over it.
r? ``@oli-obk``
|
|
Structurally normalize again for byte string lit pat checking
We need to structurally normalize the pointee of a match scrutinee when trying to match byte string patterns -- we used[^1] to call `structurally_resolve_type`, which errors for type vars[^2], but lcnr added `try_structurally_resolve_type`[^3] in the mean time, which is the right thing to use here since it's totally opportunistic.
Fixes rust-lang/trait-system-refactor-initiative#38
[^1]: #112428
[^2]: #112993
[^3]: #113086
|
|
Reveal opaques in new solver
We were testing against the wrong reveal mode :fearful:
Also a couple of misc commits that I don't want to really put in separate prs
r? ``@lcnr``
|
|
tests: unset `RUSTC_LOG_COLOR` in a test
Setting `RUSTC_LOG_COLOR=always` is sometimes useful if tools that one pipes `RUSTC_LOG` into support coloured output, but it makes this test fail because it has a `.stderr` file with `WARN` log output.
|
|
Nilstrieb:pointer-coercions-are-not-casts-because-that-sounds-way-to-general-aaaa, r=oli-obk
Rename `adjustment::PointerCast` and variants using it to `PointerCoercion`
It makes it sounds like the `ExprKind` and `Rvalue` are supposed to represent all pointer related casts, when in reality their just used to share a little enum variants. Make it clear there these are only coercions and that people who see this and think "why are so many pointer related casts not in these variants" aren't insane.
This enum was added in #59987. I'm not sure whether the variant sharing is actually worth it, but this at least makes it less confusing.
r? oli-obk
|
|
|
|
|
|
Rollup of 8 pull requests
Successful merges:
- #113413 (Add needs-triage to all new issues)
- #113426 (Don't ICE in `resolve_bound_vars` when associated return-type bounds are in bad positions)
- #113427 (Remove `variances_of` on RPITIT GATs, remove its one use-case)
- #113441 (miri: check that assignments do not self-overlap)
- #113453 (Remove unused from_method from rustc_on_unimplemented)
- #113456 (Avoid calling report_forbidden_specialization for RPITITs)
- #113466 (Update cargo)
- #113467 (Fix comment of `fn_can_unwind`)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
Avoid calling report_forbidden_specialization for RPITITs
Fixes #113438
r? ``@compiler-errors``
|
|
Remove unused from_method from rustc_on_unimplemented
Fixes #113439
`on_unimplemented_note` was calling `item_name` for RPITITs and that produced ICEs. I've added a regression test for that but also have removed `from_method` symbol entirely because it wasn't even used and by doing that the `item_name` call was also removed.
r? ``@compiler-errors``
|
|
|
|
|
|
Signed-off-by: Yuki Okushi <jtitor@2k36.org>
|
|
bad positions
|
