| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Instead of updating global state to mark attributes as used,
we now explicitly emit a warning when an attribute is used in
an unsupported position. As a side effect, we are to emit more
detailed warning messages (instead of just a generic "unused" message).
`Session.check_name` is removed, since its only purpose was to mark
the attribute as used. All of the callers are modified to use
`Attribute.has_name`
Additionally, `AttributeType::AssumedUsed` is removed - an 'assumed
used' attribute is implemented by simply not performing any checks
in `CheckAttrVisitor` for a particular attribute.
We no longer emit unused attribute warnings for the `#[rustc_dummy]`
attribute - it's an internal attribute used for tests, so it doesn't
mark sense to treat it as 'unused'.
With this commit, a large source of global untracked state is removed.
|
|
|
|
Fixes #87877
This change interacts badly with `noop_flat_map_stmt`,
which synthesizes multiple statements with the same `NodeId`.
I'm working on a better fix that will still allow us to
remove this special case. For now, let's revert the change
to fix the ICE.
This reverts commit a4262cc9841d91d48ef994b36eab323e615a7083, reversing
changes made to 8ee962f88e1be7e29482b13c7776c26b98a93bf7.
|
|
We now let `noop_flat_map_stmt` assign `NodeId`s (via `visit_id`),
just as we do for other AST nodes.
|
|
|
|
Support negative numbers in Literal::from_str
proc_macro::Literal has allowed negative numbers in a single literal token ever since Rust 1.29, using https://doc.rust-lang.org/stable/proc_macro/struct.Literal.html#method.isize_unsuffixed and similar constructors.
```rust
let lit = proc_macro::Literal::isize_unsuffixed(-10);
```
However, the suite of constructors on Literal is not sufficient for all use cases, for example arbitrary precision floats, or custom suffixes in FFI macros.
```rust
let lit = proc_macro::Literal::f64_unsuffixed(0.101001000100001000001000000100000001); // :(
let lit = proc_macro::Literal::i???_suffixed(10ulong); // :(
```
For those, macros construct the literal using from_str instead, which preserves arbitrary precision, custom suffixes, base, and digit grouping.
```rust
let lit = "0.101001000100001000001000000100000001".parse::<Literal>().unwrap();
let lit = "10ulong".parse::<Literal>().unwrap();
let lit = "0b1000_0100_0010_0001".parse::<Literal>().unwrap();
```
However, until this PR it was not possible to construct a literal token that is **both** negative **and** preserving of arbitrary precision etc.
This PR fixes `Literal::from_str` to recognize negative integer and float literals.
|
|
more clippy::complexity fixes
(also a couple of clippy::perf fixes)
|
|
|
|
|
|
Display an extra note for trailing semicolon lint with trailing macro
Currently, we parse macros at the end of a block
(e.g. `fn foo() { my_macro!() }`) as expressions, rather than
statements. This means that a macro invoked in this position
cannot expand to items or semicolon-terminated expressions.
In the future, we might want to start parsing these kinds of macros
as statements. This would make expansion more 'token-based'
(i.e. macro expansion behaves (almost) as if you just textually
replaced the macro invocation with its output). However,
this is a breaking change (see PR #78991), so it will require
further discussion.
Since the current behavior will not be changing any time soon,
we need to address the interaction with the
`SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` lint. Since we are parsing
the result of macro expansion as an expression, we will emit a lint
if there's a trailing semicolon in the macro output. However, this
results in a somewhat confusing message for users, since it visually
looks like there should be no problem with having a semicolon
at the end of a block
(e.g. `fn foo() { my_macro!() }` => `fn foo() { produced_expr; }`)
To help reduce confusion, this commit adds a note explaining
that the macro is being interpreted as an expression. Additionally,
we suggest adding a semicolon after the macro *invocation* - this
will cause us to parse the macro call as a statement. We do *not*
use a structured suggestion for this, since the user may actually
want to remove the semicolon from the macro definition (allowing
the block to evaluate to the expression produced by the macro).
|
|
Rename `known_attrs` to `expanded_inert_attrs` and move to rustc_expand
There's no need for this to be (untracked) global state.
|
|
Currently, we parse macros at the end of a block
(e.g. `fn foo() { my_macro!() }`) as expressions, rather than
statements. This means that a macro invoked in this position
cannot expand to items or semicolon-terminated expressions.
In the future, we might want to start parsing these kinds of macros
as statements. This would make expansion more 'token-based'
(i.e. macro expansion behaves (almost) as if you just textually
replaced the macro invocation with its output). However,
this is a breaking change (see PR #78991), so it will require
further discussion.
Since the current behavior will not be changing any time soon,
we need to address the interaction with the
`SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` lint. Since we are parsing
the result of macro expansion as an expression, we will emit a lint
if there's a trailing semicolon in the macro output. However, this
results in a somewhat confusing message for users, since it visually
looks like there should be no problem with having a semicolon
at the end of a block
(e.g. `fn foo() { my_macro!() }` => `fn foo() { produced_expr; }`)
To help reduce confusion, this commit adds a note explaining
that the macro is being interpreted as an expression. Additionally,
we suggest adding a semicolon after the macro *invocation* - this
will cause us to parse the macro call as a statement. We do *not*
use a structured suggestion for this, since the user may actually
want to remove the semicolon from the macro definition (allowing
the block to evaluate to the expression produced by the macro).
|
|
There's no need for this to be (untracked) global state.
|
|
These attributes are currently discarded.
This may change in the future (see #63221), but for now,
placing inert attributes on a macro invocation does nothing,
so we should warn users about it.
Technically, it's possible for there to be attribute macro
on the same macro invocation (or at a higher scope), which
inspects the inert attribute. For example:
```rust
#[look_for_inline_attr]
#[inline]
my_macro!()
#[look_for_nested_inline]
mod foo { #[inline] my_macro!() }
```
However, this would be a very strange thing to do.
Anyone running into this can manually suppress the warning.
|
|
|
|
|
|
|
|
When we need to emit a lint at a macro invocation, we currently use the
`NodeId` of its parent definition (e.g. the enclosing function). This
means that any `#[allow]` / `#[deny]` attributes placed 'closer' to the
macro (e.g. on an enclosing block or statement) will have no effect.
This commit computes a better `lint_node_id` in `InvocationCollector`.
When we visit/flat_map an AST node, we assign it a `NodeId` (earlier
than we normally would), and store than `NodeId` in current
`ExpansionData`. When we collect a macro invocation, the current
`lint_node_id` gets cloned along with our `ExpansionData`, allowing it
to be used if we need to emit a lint later on.
This improves the handling of `#[allow]` / `#[deny]` for
`SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` and some `asm!`-related lints.
The 'legacy derive helpers' lint retains its current behavior
(I've inlined the now-removed `lint_node_id` function), since
there isn't an `ExpansionData` readily available.
|
|
|
|
expand: Support helper attributes for built-in derive macros
This is needed for https://github.com/rust-lang/rust/pull/86735 (derive macro `Default` should have a helper attribute `default`).
With this PR we can specify helper attributes for built-in derives using syntax `#[rustc_builtin_macro(MacroName, attributes(attr1, attr2, ...))]` which mirrors equivalent syntax for proc macros `#[proc_macro_derive(MacroName, attributes(attr1, attr2, ...))]`.
Otherwise expansion infra was already ready for this.
The attribute parsing code is shared between proc macro derives and built-in macros (`fn parse_macro_name_and_helper_attrs`).
|
|
Rollup of 6 pull requests
Successful merges:
- #87085 (Search result colors)
- #87090 (Make BTreeSet::split_off name elements like other set methods do)
- #87098 (Unignore some pretty printing tests)
- #87099 (Upgrade `cc` crate to 1.0.69)
- #87101 (Suggest a path separator if a stray colon is found in a match arm)
- #87102 (Add GUI test for "go to first" feature)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
Co-authored-by: Esteban Kuber <estebank@users.noreply.github.com>
|
|
|
|
|
|
- The `Rustc::expn_id` field kept redundant information
- `SyntaxContext` is no longer thrown away before `save_proc_macro_span` because it's thrown away during metadata encoding anyway
|
|
This information is already available from `ExpnData`
|
|
The flag has a vague meaning and is used for a single diagnostic change that is low benefit and appears only under `-Z macro_backtrace`.
|
|
|
|
|
|
|
|
Ref #73921
|
|
|
|
expand: Move some more derive logic to rustc_builtin_macros
And cleanup some `unwrap`s in `cfg_eval`.
Refactorings extracted from https://github.com/rust-lang/rust/pull/83354 and https://github.com/rust-lang/rust/pull/86057.
r? ``@Aaron1011``
|
|
|
|
|
|
|
|
|
|
position.
|
|
|
|
Currently, we only point at the span of the macro argument. When the
macro call is itself generated by another macro, this can make it
difficult or impossible to determine which macro is responsible for
producing the error.
|
|
|
|
Remove unused feature gates
The first commit removes a usage of a feature gate, but I don't expect it to be controversial as the feature gate was only used to workaround a limitation of rust in the past. (closures never being `Clone`)
The second commit uses `#[allow_internal_unstable]` to avoid leaking the `trusted_step` feature gate usage from inside the index newtype macro. It didn't work for the `min_specialization` feature gate though.
The third commit removes (almost) all feature gates from the compiler that weren't used anyway.
|
|
|
|
As described in issue #85708, we currently do not properly decode
`SyntaxContext::root()` and `ExpnId::root()` from foreign crates. As a
result, when we decode a span from a foreign crate with
`SyntaxContext::root()`, we end up up considering it to have the edition
of the *current* crate, instead of the foreign crate where it was
originally created.
A full fix for this issue will be a fairly significant undertaking.
Fortunately, it's possible to implement a partial fix, which gives us
the correct edition-dependent behavior for `:pat` matchers when the
macro is loaded from another crate. Since we have the edition of the
macro's defining crate available, we can 'recover' from seeing a
`SyntaxContext::root()` and use the edition of the macro's defining
crate.
Any solution to issue #85708 must reproduce the behavior of this
targeted fix - properly preserving a foreign `SyntaxContext::root()`
means (among other things) preserving its edition, which by definition
is the edition of the foreign crate itself. Therefore, this fix moves us
closer to the correct overall solution, and does not expose any new
incorrect behavior to macros.
|
|
|
|
|
|
Fix `--remap-path-prefix` not correctly remapping `rust-src` component paths and unify handling of path mapping with virtualized paths
This PR fixes #73167 ("Binaries end up containing path to the rust-src component despite `--remap-path-prefix`") by preventing real local filesystem paths from reaching compilation output if the path is supposed to be remapped.
`RealFileName::Named` introduced in #72767 is now renamed as `LocalPath`, because this variant wraps a (most likely) valid local filesystem path.
`RealFileName::Devirtualized` is renamed as `Remapped` to be used for remapped path from a real path via `--remap-path-prefix` argument, as well as real path inferred from a virtualized (during compiler bootstrapping) `/rustc/...` path. The `local_path` field is now an `Option<PathBuf>`, as it will be set to `None` before serialisation, so it never reaches any build output. Attempting to serialise a non-`None` `local_path` will cause an assertion faliure.
When a path is remapped, a `RealFileName::Remapped` variant is created. The original path is preserved in `local_path` field and the remapped path is saved in `virtual_name` field. Previously, the `local_path` is directly modified which goes against its purpose of "suitable for reading from the file system on the local host".
`rustc_span::SourceFile`'s fields `unmapped_path` (introduced by #44940) and `name_was_remapped` (introduced by #41508 when `--remap-path-prefix` feature originally added) are removed, as these two pieces of information can be inferred from the `name` field: if it's anything other than a `FileName::Real(_)`, or if it is a `FileName::Real(RealFileName::LocalPath(_))`, then clearly `name_was_remapped` would've been false and `unmapped_path` would've been `None`. If it is a `FileName::Real(RealFileName::Remapped{local_path, virtual_name})`, then `name_was_remapped` would've been true and `unmapped_path` would've been `Some(local_path)`.
cc `@eddyb` who implemented `/rustc/...` path devirtualisation
|
|
This PR implements span quoting, allowing proc-macros to produce spans
pointing *into their own crate*. This is used by the unstable
`proc_macro::quote!` macro, allowing us to get error messages like this:
```
error[E0412]: cannot find type `MissingType` in this scope
--> $DIR/auxiliary/span-from-proc-macro.rs:37:20
|
LL | pub fn error_from_attribute(_args: TokenStream, _input: TokenStream) -> TokenStream {
| ----------------------------------------------------------------------------------- in this expansion of procedural macro `#[error_from_attribute]`
...
LL | field: MissingType
| ^^^^^^^^^^^ not found in this scope
|
::: $DIR/span-from-proc-macro.rs:8:1
|
LL | #[error_from_attribute]
| ----------------------- in this macro invocation
```
Here, `MissingType` occurs inside the implementation of the proc-macro
`#[error_from_attribute]`. Previosuly, this would always result in a
span pointing at `#[error_from_attribute]`
This will make many proc-macro-related error message much more useful -
when a proc-macro generates code containing an error, users will get an
error message pointing directly at that code (within the macro
definition), instead of always getting a span pointing at the macro
invocation site.
This is implemented as follows:
* When a proc-macro crate is being *compiled*, it causes the `quote!`
macro to get run. This saves all of the sapns in the input to `quote!`
into the metadata of *the proc-macro-crate* (which we are currently
compiling). The `quote!` macro then expands to a call to
`proc_macro::Span::recover_proc_macro_span(id)`, where `id` is an
opaque identifier for the span in the crate metadata.
* When the same proc-macro crate is *run* (e.g. it is loaded from disk
and invoked by some consumer crate), the call to
`proc_macro::Span::recover_proc_macro_span` causes us to load the span
from the proc-macro crate's metadata. The proc-macro then produces a
`TokenStream` containing a `Span` pointing into the proc-macro crate
itself.
The recursive nature of 'quote!' can be difficult to understand at
first. The file `src/test/ui/proc-macro/quote-debug.stdout` shows
the output of the `quote!` macro, which should make this eaier to
understand.
This PR also supports custom quoting spans in custom quote macros (e.g.
the `quote` crate). All span quoting goes through the
`proc_macro::quote_span` method, which can be called by a custom quote
macro to perform span quoting. An example of this usage is provided in
`src/test/ui/proc-macro/auxiliary/custom-quote.rs`
Custom quoting currently has a few limitations:
In order to quote a span, we need to generate a call to
`proc_macro::Span::recover_proc_macro_span`. However, proc-macros
support renaming the `proc_macro` crate, so we can't simply hardcode
this path. Previously, the `quote_span` method used the path
`crate::Span` - however, this only works when it is called by the
builtin `quote!` macro in the same crate. To support being called from
arbitrary crates, we need access to the name of the `proc_macro` crate
to generate a path. This PR adds an additional argument to `quote_span`
to specify the name of the `proc_macro` crate. Howver, this feels kind
of hacky, and we may want to change this before stabilizing anything
quote-related.
Additionally, using `quote_span` currently requires enabling the
`proc_macro_internals` feature. The builtin `quote!` macro
has an `#[allow_internal_unstable]` attribute, but this won't work for
custom quote implementations. This will likely require some additional
tricks to apply `allow_internal_unstable` to the span of
`proc_macro::Span::recover_proc_macro_span`.
|
|
Unify rustc and rustdoc parsing of `cfg()`
This extracts a new `parse_cfg` function that's used between both.
- Treat `#[doc(cfg(x), cfg(y))]` the same as `#[doc(cfg(x)]
#[doc(cfg(y))]`. Previously it would be completely ignored.
- Treat `#[doc(inline, cfg(x))]` the same as `#[doc(inline)]
#[doc(cfg(x))]`. Previously, the cfg would be ignored.
- Pass the cfg predicate through to rustc_expand to be validated
Technically this is a breaking change, but doc_cfg is still nightly so I don't think it matters.
Fixes https://github.com/rust-lang/rust/issues/84437.
r? `````````@petrochenkov`````````
|
|
|
