| Age | Commit message (Collapse) | Author | Lines |
|---|
|
This schema is helpful for people writing custom target spec JSON. It
can provide autocomplete in the editor, and also serves as documentation
when there are documentation comments on the structs, as `schemars` will
put them in the schema.
|
|
This was done in #145740 and #145947. It is causing problems for people
using r-a on anything that uses the rustc-dev rustup package, e.g. Miri,
clippy.
This repository has lots of submodules and subtrees and various
different projects are carved out of pieces of it. It seems like
`[workspace.dependencies]` will just be more trouble than it's worth.
|
|
|
|
The Cargo style guide says to put dependencies on a single line if they
fit.
|
|
|
|
|
|
`rustc_errors` depends on numerous crates, solely to implement its
`IntoDiagArg` trait on types from those crates. Many crates depend on
`rustc_errors`, and it's on the critical path.
We can't swap things around to make all of those crates depend on
`rustc_errors` instead, because `rustc_errors` would end up in
dependency cycles.
Instead, move `IntoDiagArg` into `rustc_error_messages`, which has far
fewer dependencies, and then have most of these crates depend on
`rustc_error_messages`.
This allows `rustc_errors` to drop dependencies on several crates,
including the large `rustc_target`.
(This doesn't fully reduce dependency chains yet, as `rustc_errors`
still depends on `rustc_hir` which depends on `rustc_target`. That will
get fixed in a subsequent commit.)
|
|
The previous manual parsing of `serde_json::Value` was a lot of
complicated code and extremely error-prone. It was full of janky
behavior like sometimes ignoring type errors, sometimes erroring for
type errors, sometimes warning for type errors, and sometimes just
ICEing for type errors (the icing on the top).
Additionally, many of the error messages about allowed values were out
of date because they were in a completely different place than the
FromStr impls. Overall, the system caused confusion for users.
I also found the old deserialization code annoying to read. Whenever a
`key!` invocation was found, one had to first look for the right macro
arm, and no go to definition could help.
This PR replaces all this manual parsing with a 2-step process involving
serde.
First, the string is parsed into a `TargetSpecJson` struct. This struct
is a 1:1 representation of the spec JSON. It already parses all the
enums and is very simple to read and write.
Then, the fields from this struct are copied into the actual `Target`.
The reason for this two-step process instead of just serializing into a
`Target` is because of a few reasons
1. There are a few transformations performed between the two formats
2. The default logic is implemented this way. Otherwise all the default
field values would have to be spelled out again, which is
suboptimal. With this logic, they fall out naturally, because
everything in the json struct is an `Option`.
Overall, the mapping is pretty simple, with the vast majority of fields
just doing a 1:1 mapping that is captured by two macros. I have
deliberately avoided making the macros generic to keep them simple.
All the `FromStr` impls now have the error message right inside them,
which increases the chance of it being up to date. Some "`from_str`"
impls were turned into proper `FromStr` impls to support this.
The new code is much less involved, delegating all the JSON parsing
logic to serde, without any manual type matching.
This change introduces a few breaking changes for consumers. While it is
possible to use this format on stable, it is very much subject to
change, so breaking changes are expected. The hope is also that because
of the way stricter behavior, breaking changes are easier to deal with,
as they come with clearer error messages.
1. Invalid types now always error, everywhere. Previously, they would
sometimes error, and sometimes just be ignored (which meant the users
JSON was still broken, just silently!)
2. This now makes use of `deny_unknown_fields` instead of just warning
on unused fields, which was done previously. Serde doesn't make it
easy to get such warning behavior, which was the primary reason that
this now changed. But I think error behavior is very reasonable too.
If someone has random stale fields in their JSON, it is likely
because these fields did something at some point but no longer do,
and the user likely wants to be informed of this so they can figure
out what to do.
This is also relevant for the future. If we remove a field but
someone has it set, it probably makes sense for them to take a look
whether they need this and should look for alternatives, or whether
they can just delete it. Overall, the JSON is made more explicit.
This is the only expected breakage, but there could also be small
breakage from small mistakes. All targets roundtrip though, so it can't
be anything too major.
|
|
|
|
Revert <https://github.com/rust-lang/rust/pull/138084> to buy time to
consider options that avoids breaking downstream usages of cargo on
distributed `rustc-src` artifacts, where such cargo invocations fail due
to inability to inherit `lints` from workspace root manifest's
`workspace.lints` (this is only valid for the source rust-lang/rust
workspace, but not really the distributed `rustc-src` artifacts).
This breakage was reported in
<https://github.com/rust-lang/rust/issues/138304>.
This reverts commit 48caf81484b50dca5a5cebb614899a3df81ca898, reversing
changes made to c6662879b27f5161e95f39395e3c9513a7b97028.
|
|
By naming them in `[workspace.lints.rust]` in the top-level
`Cargo.toml`, and then making all `compiler/` crates inherit them with
`[lints] workspace = true`. (I omitted `rustc_codegen_{cranelift,gcc}`,
because they're a bit different.)
The advantages of this over the current approach:
- It uses a standard Cargo feature, rather than special handling in
bootstrap. So, easier to understand, and less likely to get
accidentally broken in the future.
- It works for proc macro crates.
It's a shame it doesn't work for rustc-specific lints, as the comments
explain.
|
|
|
|
|
|
waiting on thorin-dwp update
dedup one wasmparser
run-make-support: drop some features for wasmparser
dedupe wasm-encoder
|
|
This involves lots of breaking changes. There are two big changes that
force changes. The first is that the bitflag types now don't
automatically implement normal derive traits, so we need to derive them
manually.
Additionally, bitflags now have a hidden inner type by default, which
breaks our custom derives. The bitflags docs recommend using the impl
form in these cases, which I did.
|
|
- Sort dependencies and features sections.
- Add `tidy` markers to the sorted sections so they stay sorted.
- Remove empty `[lib`] sections.
- Remove "See more keys..." comments.
Excluded files:
- rustc_codegen_{cranelift,gcc}, because they're external.
- rustc_lexer, because it has external use.
- stable_mir, because it has external use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Since RFC 3052 soft deprecated the authors field anyway, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information, we should remove it from
crates in this repo.
|
|
|
