| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Signed-off-by: David Wood <david@davidtw.co>
|
|
It's a better name, and lets "active features" refer to the features
that are active in a particular program, due to being declared or
enabled by the edition.
The commit also renames `Features::enabled` as `Features::active` to
match this; I changed my mind and have decided that "active" is a little
better thatn "enabled" for this, particularly because a number of
pre-existing comments use "active" in this way.
Finally, the commit renames `Status::Stable` as `Status::Accepted`, to
match `ACCEPTED_FEATURES`.
|
|
This is the default calling convention for ARM - it is used for extern "C",
therefore it supports varargs.
|
|
As experimentation in 115242 has shown looks better than `coldcc`.
And *don't* use a different convention for cold on Windows, because that actually ends up making things worse.
cc tracking issue 97544
|
|
Similar to prior support added for the mips430, avr, and x86 targets
this change implements the rough equivalent of clang's
[`__attribute__((interrupt))`][clang-attr] for riscv targets, enabling
e.g.
```rust
static mut CNT: usize = 0;
pub extern "riscv-interrupt-m" fn isr_m() {
unsafe {
CNT += 1;
}
}
```
to produce highly effective assembly like:
```asm
pub extern "riscv-interrupt-m" fn isr_m() {
420003a0: 1141 addi sp,sp,-16
unsafe {
CNT += 1;
420003a2: c62a sw a0,12(sp)
420003a4: c42e sw a1,8(sp)
420003a6: 3fc80537 lui a0,0x3fc80
420003aa: 63c52583 lw a1,1596(a0) # 3fc8063c <_ZN12esp_riscv_rt3CNT17hcec3e3a214887d53E.0>
420003ae: 0585 addi a1,a1,1
420003b0: 62b52e23 sw a1,1596(a0)
}
}
420003b4: 4532 lw a0,12(sp)
420003b6: 45a2 lw a1,8(sp)
420003b8: 0141 addi sp,sp,16
420003ba: 30200073 mret
```
(disassembly via `riscv64-unknown-elf-objdump -C -S --disassemble ./esp32c3-hal/target/riscv32imc-unknown-none-elf/release/examples/gpio_interrupt`)
This outcome is superior to hand-coded interrupt routines which, lacking
visibility into any non-assembly body of the interrupt handler, have to
be very conservative and save the [entire CPU state to the stack
frame][full-frame-save]. By instead asking LLVM to only save the
registers that it uses, we defer the decision to the tool with the best
context: it can more accurately account for the cost of spills if it
knows that every additional register used is already at the cost of an
implicit spill.
At the LLVM level, this is apparently [implemented by] marking every
register as "[callee-save]," matching the semantics of an interrupt
handler nicely (it has to leave the CPU state just as it found it after
its `{m|s}ret`).
This approach is not suitable for every interrupt handler, as it makes
no attempt to e.g. save the state in a user-accessible stack frame. For
a full discussion of those challenges and tradeoffs, please refer to
[the interrupt calling conventions RFC][rfc].
Inside rustc, this implementation differs from prior art because LLVM
does not expose the "all-saved" function flavor as a calling convention
directly, instead preferring to use an attribute that allows for
differentiating between "machine-mode" and "superivsor-mode" interrupts.
Finally, some effort has been made to guide those who may not yet be
aware of the differences between machine-mode and supervisor-mode
interrupts as to why no `riscv-interrupt` calling convention is exposed
through rustc, and similarly for why `riscv-interrupt-u` makes no
appearance (as it would complicate future LLVM upgrades).
[clang-attr]: https://clang.llvm.org/docs/AttributeReference.html#interrupt-risc-v
[full-frame-save]: https://github.com/esp-rs/esp-riscv-rt/blob/9281af2ecffe13e40992917316f36920c26acaf3/src/lib.rs#L440-L469
[implemented by]: https://github.com/llvm/llvm-project/blob/b7fb2a3fec7c187d58a6d338ab512d9173bca987/llvm/lib/Target/RISCV/RISCVRegisterInfo.cpp#L61-L67
[callee-save]: https://github.com/llvm/llvm-project/blob/973f1fe7a8591c7af148e573491ab68cc15b6ecf/llvm/lib/Target/RISCV/RISCVCallingConv.td#L30-L37
[rfc]: https://github.com/rust-lang/rfcs/pull/3246
|
|
|
|
|
|
|
|
|
|
Tracking issue: https://github.com/rust-lang/rust/issues/65815
|
|
This patch makes it possible to use varargs for calling conventions,
which are either based on C (like efiapi) or C is based
on them (for example sysv64 and win64).
|
|
|
|
|
|
The eventual goal is to try using this for things like the internal panicking stuff, to see whether it helps.
|
|
The following *-unwind ABIs are now supported:
- "C-unwind"
- "cdecl-unwind"
- "stdcall-unwind"
- "fastcall-unwind"
- "vectorcall-unwind"
- "thiscall-unwind"
- "aapcs-unwind"
- "win64-unwind"
- "sysv64-unwind"
- "system-unwind"
|
|
|
|
It makes very little sense to maintain denylists of ABIs when, as far as
non-generic ABIs are concerned, targets usually only support a small
subset of the available ABIs.
This has historically been a cause of bugs such as us allowing use of
the platform-specific ABIs on x86 targets – these in turn would cause
LLVM errors or assertions to fire.
Fixes #57182
Sponsored by: standard.ai
|
|
This commit implements the idea of a new ABI for the WebAssembly target,
one called `"wasm"`. This ABI is entirely of my own invention
and has no current precedent, but I think that the addition of this ABI
might help solve a number of issues with the WebAssembly targets.
When `wasm32-unknown-unknown` was first added to Rust I naively
"implemented an abi" for the target. I then went to write `wasm-bindgen`
which accidentally relied on details of this ABI. Turns out the ABI
definition didn't match C, which is causing issues for C/Rust interop.
Currently the compiler has a "wasm32 bindgen compat" ABI which is the
original implementation I added, and it's purely there for, well,
`wasm-bindgen`.
Another issue with the WebAssembly target is that it's not clear to me
when and if the default C ABI will change to account for WebAssembly's
multi-value feature (a feature that allows functions to return multiple
values). Even if this does happen, though, it seems like the C ABI will
be guided based on the performance of WebAssembly code and will likely
not match even what the current wasm-bindgen-compat ABI is today. This
leaves a hole in Rust's expressivity in binding WebAssembly where given
a particular import type, Rust may not be able to import that signature
with an updated C ABI for multi-value.
To fix these issues I had the idea of a new ABI for WebAssembly, one
called `wasm`. The definition of this ABI is "what you write
maps straight to wasm". The goal here is that whatever you write down in
the parameter list or in the return values goes straight into the
function's signature in the WebAssembly file. This special ABI is for
intentionally matching the ABI of an imported function from the
environment or exporting a function with the right signature.
With the addition of a new ABI, this enables rustc to:
* Eventually remove the "wasm-bindgen compat hack". Once this
ABI is stable wasm-bindgen can switch to using it everywhere.
Afterwards the wasm32-unknown-unknown target can have its default ABI
updated to match C.
* Expose the ability to precisely match an ABI signature for a
WebAssembly function, regardless of what the C ABI that clang chooses
turns out to be.
* Continue to evolve the definition of the default C ABI to match what
clang does on all targets, since the purpose of that ABI will be
explicitly matching C rather than generating particular function
imports/exports.
Naturally this is implemented as an unstable feature initially, but it
would be nice for this to get stabilized (if it works) in the near-ish
future to remove the wasm32-unknown-unknown incompatibility with the C
ABI. Doing this, however, requires the feature to be on stable because
wasm-bindgen works with stable Rust.
|
|
### Add debug assertion to check `AbiDatas` ordering
This makes a small alteration to `Abi::index`, so that we include a
debug assertion to check that the index we are returning corresponds
with the same abi in our data array.
This will help prevent ordering bugs in the future, which can
manifest in rather strange errors.
### Using exhaustive ABI matches
This slightly modifies the changes from our previous commits,
favoring exhaustive matches in place of `_ => ...` fall-through
arms.
This should help with maintenance in the future, when additional
ABI's are added, or when existing ABI's are modified.
### List all `-unwind` ABI's in unstable book
This updates the `c-unwind` page in the unstable book to list _all_
of the other ABI strings that are introduced by this feature gate.
Now, all of the ABI's specified by RFC 2945 are shown.
Co-authored-by: Amanieu d'Antras <amanieu@gmail.com>
Co-authored-by: Niko Matsakis <niko@alum.mit.edu>
|
|
### Overview
This commit begins the implementation work for RFC 2945. For more
information, see the rendered RFC [1] and tracking issue [2].
A boolean `unwind` payload is added to the `C`, `System`, `Stdcall`,
and `Thiscall` variants, marking whether unwinding across FFI
boundaries is acceptable. The cases where each of these variants'
`unwind` member is true correspond with the `C-unwind`,
`system-unwind`, `stdcall-unwind`, and `thiscall-unwind` ABI strings
introduced in RFC 2945 [3].
### Feature Gate and Unstable Book
This commit adds a `c_unwind` feature gate for the new ABI strings.
Tests for this feature gate are included in `src/test/ui/c-unwind/`,
which ensure that this feature gate works correctly for each of the
new ABIs.
A new language features entry in the unstable book is added as well.
### Further Work To Be Done
This commit does not proceed to implement the new unwinding ABIs,
and is intentionally scoped specifically to *defining* the ABIs and
their feature flag.
### One Note on Test Churn
This will lead to some test churn, in re-blessing hash tests, as the
deleted comment in `src/librustc_target/spec/abi.rs` mentioned,
because we can no longer guarantee the ordering of the `Abi`
variants.
While this is a downside, this decision was made bearing in mind
that RFC 2945 states the following, in the "Other `unwind` Strings"
section [3]:
> More unwind variants of existing ABI strings may be introduced,
> with the same semantics, without an additional RFC.
Adding a new variant for each of these cases, rather than specifying
a payload for a given ABI, would quickly become untenable, and make
working with the `Abi` enum prone to mistakes.
This approach encodes the unwinding information *into* a given ABI,
to account for the future possibility of other `-unwind` ABI
strings.
### Ignore Directives
`ignore-*` directives are used in two of our `*-unwind` ABI test
cases.
Specifically, the `stdcall-unwind` and `thiscall-unwind` test cases
ignore architectures that do not support `stdcall` and
`thiscall`, respectively.
These directives are cribbed from
`src/test/ui/c-variadic/variadic-ffi-1.rs` for `stdcall`, and
`src/test/ui/extern/extern-thiscall.rs` for `thiscall`.
This would otherwise fail on some targets, see:
https://github.com/rust-lang-ci/rust/commit/fcf697f90206e9c87b39d494f94ab35d976bfc60
### Footnotes
[1]: https://github.com/rust-lang/rfcs/blob/master/text/2945-c-unwind-abi.md
[2]: https://github.com/rust-lang/rust/issues/74990
[3]: https://github.com/rust-lang/rfcs/blob/master/text/2945-c-unwind-abi.md#other-unwind-abi-strings
|
|
This commit adds a new ABI to be selected via `extern
"C-cmse-nonsecure-call"` on function pointers in order for the compiler to
apply the corresponding cmse_nonsecure_call callsite attribute.
For Armv8-M targets supporting TrustZone-M, this will perform a
non-secure function call by saving, clearing and calling a non-secure
function pointer using the BLXNS instruction.
See the page on the unstable book for details.
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
|
|
|
