| Age | Commit message (Collapse) | Author | Lines |
|---|
|
|
|
Discovered in #61416 an accidental regression in libstd's backtrace
behavior is that it previously attempted to consult libbacktrace and
would then fall back to `dladdr` if libbacktrace didn't report anything.
The `backtrace` crate, however, did not do this, so that's now been
fixed!
Changes: https://github.com/rust-lang/backtrace-rs/compare/0.3.25...0.3.27
Closes #61416
|
|
Fixes #61357
|
|
This commit removes all in-tree support for generating backtraces in
favor of depending on the `backtrace` crate on crates.io. This resolves
a very longstanding piece of duplication where the standard library has
long contained the ability to generate a backtrace on panics, but the
code was later extracted and duplicated on crates.io with the
`backtrace` crate. Since that fork each implementation has seen various
improvements one way or another, but typically `backtrace`-the-crate has
lagged behind libstd in one way or another.
The goal here is to remove this duplication of a fairly critical piece
of code and ensure that there's only one source of truth for generating
backtraces between the standard library and the crate on crates.io.
Recently I've been working to bring the `backtrace` crate on crates.io
up to speed with the support in the standard library which includes:
* Support for `StackWalkEx` on MSVC to recover inline frames with
debuginfo.
* Using `libbacktrace` by default on MinGW targets.
* Supporting `libbacktrace` on OSX as an option.
* Ensuring all the requisite support in `backtrace`-the-crate compiles
with `#![no_std]`.
* Updating the `libbacktrace` implementation in `backtrace`-the-crate to
initialize the global state with the correct filename where necessary.
After reviewing the code in libstd the `backtrace` crate should be at
exact feature parity with libstd today. The backtraces generated should
have the same symbols and same number of frames in general, and there's
not known divergence from libstd currently.
Note that one major difference between libstd's backtrace support and
the `backtrace` crate is that on OSX the crates.io crate enables the
`coresymbolication` feature by default. This feature, however, uses
private internal APIs that aren't published for OSX. While they provide
more accurate backtraces this isn't appropriate for libstd distributed
as a binary, so libstd's dependency on the `backtrace` crate explicitly
disables this feature and forces OSX to use `libbacktrace` as a
symbolication strategy.
The long-term goal of this refactoring is to eventually move us towards
a world where we can drop `libbacktrace` entirely and simply use Gimli
and the surrounding crates for backtrace support. That's still aways off
but hopefully will much more easily enabled by having the source of
truth for backtraces live in crates.io!
Procedurally if we go forward with this I'd like to transfer the
`backtrace-rs` crate to the rust-lang GitHub organization as well, but I
figured I'd hold off on that until we get closer to merging.
|
|
This commit bumps the `compiler-builtins` dependency to 0.1.15 which
expects to have the source for `compiler-rt` provided externally if the
`c` feature is enabled. This then plumbs through the necessary support
in the build system to ensure that if the `llvm-project` directory is
checked out and present that we enable the `c` feature of
`compiler-builtins` and compile in all the C intrinsics.
|
|
This updates to 0.1.13 for `compiler_builtins`, published to fix a few
issues. The feature changes here are updated because `compiler_builtins`
no longer enables the `c` feature by default but we want to do so
through our build still.
Closes #60747
Closes #60782
|
|
According to the Cargo Reference:
https://doc.rust-lang.org/cargo/reference/manifest.html
> This is an SPDX 2.1 license expression for this package. Currently
> crates.io will validate the license provided against a whitelist of
> known license and exception identifiers from the SPDX license list
> 2.4. Parentheses are not currently supported.
>
> Multiple licenses can be separated with a `/`, although that usage
> is deprecated. Instead, use a license expression with AND and OR
> operators to get more explicit semantics.
|
|
Pulls in a fix for ensuring that wasm targets have code in
compiler-builtins for `ldexp` which LLVM can generate references to.
|
|
|
|
|
|
|
|
|
|
Turns out we needed to exclude a number of math functions on the
`wasm32-unknown-wasi` target, and this was fixed in 0.1.9 of
compiler-builtins and this is pulling in the fix to libstd's own build.
|
|
This avoids the dependency on host libraries such as libgcc_s which
may be undesirable in some deployment environments where these aren't
available.
|
|
This commit adds a new wasm32-based target distributed through rustup,
supported in the standard library, and implemented in the compiler. The
`wasm32-unknown-wasi` target is intended to be a WebAssembly target
which matches the [WASI proposal recently announced.][LINK]. In summary
the WASI target is an effort to define a standard set of syscalls for
WebAssembly modules, allowing WebAssembly modules to not only be
portable across architectures but also be portable across environments
implementing this standard set of system calls.
The wasi target in libstd is still somewhat bare bones. This PR does not
fill out the filesystem, networking, threads, etc. Instead it only
provides the most basic of integration with the wasi syscalls, enabling
features like:
* `Instant::now` and `SystemTime::now` work
* `env::args` is hooked up
* `env::vars` will look up environment variables
* `println!` will print to standard out
* `process::{exit, abort}` should be hooked up appropriately
None of these APIs can work natively on the `wasm32-unknown-unknown`
target, but with the assumption of the WASI set of syscalls we're able
to provide implementations of these syscalls that engines can implement.
Currently the primary engine implementing wasi is [wasmtime], but more
will surely emerge!
In terms of future development of libstd, I think this is something
we'll probably want to discuss. The purpose of the WASI target is to
provide a standardized set of syscalls, but it's *also* to provide a
standard C sysroot for compiling C/C++ programs. This means it's
intended that functions like `read` and `write` are implemented for this
target with a relatively standard definition and implementation. It's
unclear, therefore, how we want to expose file descriptors and how we'll
want to implement system primitives. For example should `std::fs::File`
have a libc-based file descriptor underneath it? The raw wasi file
descriptor? We'll see! Currently these details are all intentionally
hidden and things we can change over time.
A `WasiFd` sample struct was added to the standard library as part of
this commit, but it's not currently used. It shows how all the wasi
syscalls could be ergonomically bound in Rust, and they offer a possible
implementation of primitives like `std::fs::File` if we bind wasi file
descriptors exactly.
Apart from the standard library, there's also the matter of how this
target is integrated with respect to its C standard library. The
reference sysroot, for example, provides managment of standard unix file
descriptors and also standard APIs like `open` (as opposed to the
relative `openat` inspiration for the wasi ssycalls). Currently the
standard library relies on the C sysroot symbols for operations such as
environment management, process exit, and `read`/`write` of stdio fds.
We want these operations in Rust to be interoperable with C if they're
used in the same process. Put another way, if Rust and C are linked into
the same WebAssembly binary they should work together, but that requires
that the same C standard library is used.
We also, however, want the `wasm32-unknown-wasi` target to be
usable-by-default with the Rust compiler without requiring a separate
toolchain to get downloaded and configured. With that in mind, there's
two modes of operation for the `wasm32-unknown-wasi` target:
1. By default the C standard library is statically provided inside of
`liblibc.rlib` distributed as part of the sysroot. This means that
you can `rustc foo.wasm --target wasm32-unknown-unknown` and you're
good to go, a fully workable wasi binary pops out. This is
incompatible with linking in C code, however, which may be compiled
against a different sysroot than the Rust code was previously
compiled against. In this mode the default of `rust-lld` is used to
link binaries.
2. For linking with C code, the `-C target-feature=-crt-static` flag
needs to be passed. This takes inspiration from the musl target for
this flag, but the idea is that you're no longer using the provided
static C runtime, but rather one will be provided externally. This
flag is intended to also get coupled with an external `clang`
compiler configured with its own sysroot. Therefore you'll typically
use this flag with `-C linker=/path/to/clang-script-wrapper`. Using
this mode the Rust code will continue to reference standard C
symbols, but the definition will be pulled in by the linker configured.
Alright so that's all the current state of this PR. I suspect we'll
definitely want to discuss this before landing of course! This PR is
coupled with libc changes as well which I'll be posting shortly.
[LINK]:
[wasmtime]:
|
|
|
|
|
|
|
|
|
|
Signed-off-by: Yu Ding <dingelish@gmail.com>
|
|
This commit switches the standard library to using the `backtrace-sys`
crate from crates.io instead of duplicating the logic here in the Rust
repositor with the `backtrace-sys`'s crate's logic.
Eventually this will hopefully be a good step towards using the
`backtrace` crate directly from crates.io itself, but we're not quite
there yet! Hopefully this is a small incremental first step we can take.
|
|
|
|
No more need to duplicate the demangling routine between crates.io and
the standard library, we can use the exact same one!
|
|
Ever since we added a Cargo-based build system for the compiler the
standard library has always been a little special, it's never been able
to depend on crates.io crates for runtime dependencies. This has been a
result of various limitations, namely that Cargo doesn't understand that
crates from crates.io depend on libcore, so Cargo tries to build crates
before libcore is finished.
I had an idea this afternoon, however, which lifts the strategy
from #52919 to directly depend on crates.io crates from the standard
library. After all is said and done this removes a whopping three
submodules that we need to manage!
The basic idea here is that for any crate `std` depends on it adds an
*optional* dependency on an empty crate on crates.io, in this case named
`rustc-std-workspace-core`. This crate is overridden via `[patch]` in
this repository to point to a local crate we write, and *that* has a
`path` dependency on libcore.
Note that all `no_std` crates also depend on `compiler_builtins`, but if
we're not using submodules we can publish `compiler_builtins` to
crates.io and all crates can depend on it anyway! The basic strategy
then looks like:
* The standard library (or some transitive dep) decides to depend on a
crate `foo`.
* The standard library adds
```toml
[dependencies]
foo = { version = "0.1", features = ['rustc-dep-of-std'] }
```
* The crate `foo` has an optional dependency on `rustc-std-workspace-core`
* The crate `foo` has an optional dependency on `compiler_builtins`
* The crate `foo` has a feature `rustc-dep-of-std` which activates these
crates and any other necessary infrastructure in the crate.
A sample commit for `dlmalloc` [turns out to be quite simple][commit].
After that all `no_std` crates should largely build "as is" and still be
publishable on crates.io! Notably they should be able to continue to use
stable Rust if necessary, since the `rename-dependency` feature of Cargo
is soon stabilizing.
As a proof of concept, this commit removes the `dlmalloc`,
`libcompiler_builtins`, and `libc` submodules from this repository. Long
thorns in our side these are now gone for good and we can directly
depend on crates.io! It's hoped that in the long term we can bring in
other crates as necessary, but for now this is largely intended to
simply make it easier to manage these crates and remove submodules.
This should be a transparent non-breaking change for all users, but one
possible stickler is that this almost for sure breaks out-of-tree
`std`-building tools like `xargo` and `cargo-xbuild`. I think it should
be relatively easy to get them working, however, as all that's needed is
an entry in the `[patch]` section used to build the standard library.
Hopefully we can work with these tools to solve this problem!
[commit]: https://github.com/alexcrichton/dlmalloc-rs/commit/28ee12db813a3b650a7c25d1c36d2c17dcb88ae3
|
|
The files src/libstd/sys/sgx/*.rs are mostly copied/adapted from
the wasm target.
This also updates the dlmalloc submodule to the very latest version.
|
|
|
|
|
|
It stop asserts and panics from libstd to automatically
include string output and formatting code.
Use case: developing static executables smaller than 50 kilobytes,
where usual formatting code is excessive while keeping debuggability
in debug mode.
May resolve #54981.
|
|
This commit deletes the `alloc_system` crate from the standard
distribution. This unstable crate is no longer needed in the modern
stable global allocator world, but rather its functionality is folded
directly into the standard library. The standard library was already the
only stable location to access this crate, and as a result this should
not affect any stable code.
|
|
This commit removes all jemalloc related submodules, configuration, etc,
from the bootstrap, from the standard library, and from the compiler.
This will be followed up with a change to use jemalloc specifically as
part of rustc on blessed platforms.
|
|
This adds an implementation of thread local storage for the
`wasm32-unknown-unknown` target when the `atomics` feature is
implemented. This, however, comes with a notable caveat of that it
requires a new feature of the standard library, `wasm-bindgen-threads`,
to be enabled.
Thread local storage for wasm (when `atomics` are enabled and there's
actually more than one thread) is powered by the assumption that an
external entity can fill in some information for us. It's not currently
clear who will fill in this information nor whose responsibility it
should be long-term. In the meantime there's a strategy being gamed out
in the `wasm-bindgen` project specifically, and the hope is that we can
continue to test and iterate on the standard library without committing
to a particular strategy yet.
As to the details of `wasm-bindgen`'s strategy, LLVM doesn't currently
have the ability to emit custom `global` values (thread locals in a
`WebAssembly.Module`) so we leverage the `wasm-bindgen` CLI tool to do
it for us. To that end we have a few intrinsics, assuming two global values:
* `__wbindgen_current_id` - gets the current thread id as a 32-bit
integer. It's `wasm-bindgen`'s responsibility to initialize this
per-thread and then inform libstd of the id. Currently `wasm-bindgen`
performs this initialization as part of the `start` function.
* `__wbindgen_tcb_{get,set}` - in addition to a thread id it's assumed
that there's a global available for simply storing a pointer's worth
of information (a thread control block, which currently only contains
thread local storage). This would ideally be a native `global`
injected by LLVM, but we don't have a great way to support that right
now.
To reiterate, this is all intended to be unstable and purely intended
for testing out Rust on the web with threads. The story is very likely
to change in the future and we want to make sure that we're able to do
that!
|
|
|
|
Its former contents are now in libcore.
|
|
While we're at it update the `backtrace` crate from crates.io. It turns out that
the submodule's configure script has gotten a lot more finnicky as of late so
also switch over to using the `cc` crate manually which allows to avoid some
hacks around the configure script as well
|
|
Required moving all fulldeps tests depending on `rand` to different locations as
now there's multiple `rand` crates that can't be implicitly linked against.
|
|
|
|
This commit removes the `rand` crate from the standard library facade as
well as the `__rand` module in the standard library. Neither of these
were used in any meaningful way in the standard library itself. The only
need for randomness in libstd is to initialize the thread-local keys of
a `HashMap`, and that unconditionally used `OsRng` defined in the
standard library anyway.
The cruft of the `rand` crate and the extra `rand` support in the
standard library makes libstd slightly more difficult to port to new
platforms, namely WebAssembly which doesn't have any randomness at all
(without interfacing with JS). The purpose of this commit is to clarify
and streamline randomness in libstd, focusing on how it's only required
in one location, hashmap seeds.
Note that the `rand` crate out of tree has almost always been a drop-in
replacement for the `rand` crate in-tree, so any usage (accidental or
purposeful) of the crate in-tree should switch to the `rand` crate on
crates.io. This then also has the further benefit of avoiding
duplication (mostly) between the two crates!
|
|
Include a description field for libstd in Cargo metadata.
|
|
Include the repository info for libstd in the Cargo metadata.
|
|
Include the license of libstd in the cargo metadata
|
|
This reverts commit 6484258f1749499d3e51685df867b3d460a7f0be.
|
|
|
|
|
|
This is the name the `gcc` crate has moved to
|
|
This commit migrates the in-tree `libcompiler_builtins` to the upstream version
at https://github.com/rust-lang-nursery/compiler-builtins. The upstream version
has a number of intrinsics written in Rust and serves as an in-progress rewrite
of compiler-rt into Rust. Additionally it also contains all the existing
intrinsics defined in `libcompiler_builtins` for 128-bit integers.
It's been the intention since the beginning to make this transition but
previously it just lacked the manpower to get done. As this PR likely shows it
wasn't a trivial integration! Some highlight changes are:
* The PR rust-lang-nursery/compiler-builtins#166 contains a number of fixes
across platforms and also some refactorings to make the intrinsics easier to
read. The additional testing added there also fixed a number of integration
issues when pulling the repository into this tree.
* LTO with the compiler-builtins crate was fixed to link in the entire crate
after the LTO process as these intrinsics are excluded from LTO.
* Treatment of hidden symbols was updated as previously the
`#![compiler_builtins]` crate would mark all symbol *imports* as hidden
whereas it was only intended to mark *exports* as hidden.
|
|
|
|
Merge crate `collections` into `alloc`
This is a necessary step in order to merge #42565
|
|
|
|
|
|
Fixes #38584
|
