about summary refs log tree commit diff
path: root/src/libstd/net
AgeCommit message (Collapse)AuthorLines
2016-07-20Auto merge of #34694 - mathphreak:master, r=alexcrichtonbors-0/+121
Add IpAddr common methods Per https://github.com/rust-lang/rfcs/pull/1668#issuecomment-230867962 no RFC is needed here. The generated documentation for these methods is being weird. It shows a deprecation message referencing #27709 for each of them even though two of the referenced methods were stabilized as part of that issue. I don't know how best to address that.
2016-07-11Mark Ipv4Addr is_unspecified as stable and provide reference.Ben Stern-0/+4
2016-07-07Add links to Ipv*Addr methods in docsMatt Horn-5/+15
per https://github.com/rust-lang/rust/pull/34694#issuecomment-231126489
2016-07-06Properly mark new methods as unstableMatt Horn-5/+8
2016-07-06Mark new methods as unstableMatt Horn-0/+5
2016-07-06Add IpAddr common methodsMatt Horn-0/+103
2016-06-29Update documentation to reflect ignoring of unknown addressesTobias Bucher-1/+7
2016-06-29Ignore unknown address types when looking up hostsTobias Bucher-8/+3
Previously, any function using a `ToSocketAddrs` input would fail if passed a hostname that resolves to an address type different from the ones recognized by Rust. This also changes the `LookupHost` iterator to only include the known address types, as a result, it doesn't have to return `Result`s any more, which are likely misinterpreted as failed name lookups.
2016-06-13Improve IP reserved address docsOliver Middleton-20/+35
- Add links to all RFCs to make it clear these are not Rust RFCs. - Correct RFC numbers to match the numbers in [RFC 6890](https://tools.ietf.org/html/rfc6890) - Clean up formatting to show addresses and ranges in parentheses like (255.255.255.255)
2016-05-26Make Ipv4Addr cmp() fasterAlexander Polyakov-1/+1
2016-05-07Rollup merge of #33439 - birkenfeld:ip-rfc-refs, r=steveklabnikSteve Klabnik-5/+5
doc: make RFC references consistent Always add a space and end sentence with a full stop.
2016-05-05doc: make RFC references consistentGeorg Brandl-5/+5
2016-05-05Fix some some duplicate words.Georg Brandl-1/+1
2016-04-26Rollup merge of #33200 - sfackler:nonblocking-docs, r=alexcrichtonManish Goregaokar-1/+1
Fix reference to TCP in UDP docs Closees #33195
2016-04-26Rollup merge of #33167 - benaryorg:master, r=alexcrichtonManish Goregaokar-0/+2
clarify documentation of TcpStream::connect() for multiple valid addresses I am not sure how the UDP part of the stdlib behaves when passing multiple valid addresses, but it should be mentioned as there are legit use cases for [`impl<'a> ToSocketAddrs for &'a [SocketAddr]`](http://doc.rust-lang.org/nightly/std/net/trait.ToSocketAddrs.html), a TCP fallback only being one. Just a little example program for anyone willing to enhance the documentation further: ```rust use std::net::SocketAddr; use std::net::ToSocketAddrs; use std::net::TcpStream; fn main() { let v: Vec<SocketAddr> = vec! [ "127.0.0.1:1338".to_socket_addrs().unwrap().next().unwrap(), "127.0.0.1:1337".to_socket_addrs().unwrap().next().unwrap(), "127.0.0.1:1339".to_socket_addrs().unwrap().next().unwrap(), ]; let stream = TcpStream::connect(&v[..]).unwrap(); } ```
2016-04-25Fix reference to TCP in UDP docsSteven Fackler-1/+1
Closees #33195
2016-04-23clarify documentation of TcpStream::connect() for multiple valid addressesbenaryorg-0/+2
Signed-off-by: benaryorg <binary@benary.org>
2016-04-20Remove IPV6_V6ONLY functionalitySteven Fackler-46/+0
These settings can only be adjusted before bind time, which doesn't make sense in the current set of functionality. These methods are stable, but haven't hit a stable release yet. Closes #33052 [breaking-change]
2016-04-11std: Stabilize APIs for the 1.9 releaseAlex Crichton-16/+32
This commit applies all stabilizations, renamings, and deprecations that the library team has decided on for the upcoming 1.9 release. All tracking issues have gone through a cycle-long "final comment period" and the specific APIs stabilized/deprecated are: Stable * `std::panic` * `std::panic::catch_unwind` (renamed from `recover`) * `std::panic::resume_unwind` (renamed from `propagate`) * `std::panic::AssertUnwindSafe` (renamed from `AssertRecoverSafe`) * `std::panic::UnwindSafe` (renamed from `RecoverSafe`) * `str::is_char_boundary` * `<*const T>::as_ref` * `<*mut T>::as_ref` * `<*mut T>::as_mut` * `AsciiExt::make_ascii_uppercase` * `AsciiExt::make_ascii_lowercase` * `char::decode_utf16` * `char::DecodeUtf16` * `char::DecodeUtf16Error` * `char::DecodeUtf16Error::unpaired_surrogate` * `BTreeSet::take` * `BTreeSet::replace` * `BTreeSet::get` * `HashSet::take` * `HashSet::replace` * `HashSet::get` * `OsString::with_capacity` * `OsString::clear` * `OsString::capacity` * `OsString::reserve` * `OsString::reserve_exact` * `OsStr::is_empty` * `OsStr::len` * `std::os::unix::thread` * `RawPthread` * `JoinHandleExt` * `JoinHandleExt::as_pthread_t` * `JoinHandleExt::into_pthread_t` * `HashSet::hasher` * `HashMap::hasher` * `CommandExt::exec` * `File::try_clone` * `SocketAddr::set_ip` * `SocketAddr::set_port` * `SocketAddrV4::set_ip` * `SocketAddrV4::set_port` * `SocketAddrV6::set_ip` * `SocketAddrV6::set_port` * `SocketAddrV6::set_flowinfo` * `SocketAddrV6::set_scope_id` * `<[T]>::copy_from_slice` * `ptr::read_volatile` * `ptr::write_volatile` * The `#[deprecated]` attribute * `OpenOptions::create_new` Deprecated * `std::raw::Slice` - use raw parts of `slice` module instead * `std::raw::Repr` - use raw parts of `slice` module instead * `str::char_range_at` - use slicing plus `chars()` plus `len_utf8` * `str::char_range_at_reverse` - use slicing plus `chars().rev()` plus `len_utf8` * `str::char_at` - use slicing plus `chars()` * `str::char_at_reverse` - use slicing plus `chars().rev()` * `str::slice_shift_char` - use `chars()` plus `Chars::as_str` * `CommandExt::session_leader` - use `before_exec` instead. Closes #27719 cc #27751 (deprecating the `Slice` bits) Closes #27754 Closes #27780 Closes #27809 Closes #27811 Closes #27830 Closes #28050 Closes #29453 Closes #29791 Closes #29935 Closes #30014 Closes #30752 Closes #31262 cc #31398 (still need to deal with `before_exec`) Closes #31405 Closes #31572 Closes #31755 Closes #31756
2016-04-01Auto merge of #32334 - tbu-:pr_ipv6_octets, r=aturonbors-21/+43
Add functions to convert IPv6 addresses from and to octets See also #32313.
2016-03-27Extend linkchecker with anchor checkingmitaa-13/+13
This adds checks to ensure that: * link anchors refer to existing id's on the target page * id's are unique within an html document * page redirects are valid
2016-03-23Auto merge of #32454 - eddyb:rollup, r=eddybbors-6/+6
Rollup of 11 pull requests - Successful merges: #32404, #32420, #32423, #32425, #32429, #32430, #32431, #32434, #32437, #32441, #32443 - Failed merges:
2016-03-22try! -> ?Jorge Aparicio-9/+9
Automated conversion using the untry tool [1] and the following command: ``` $ find -name '*.rs' -type f | xargs untry ``` at the root of the Rust repo. [1]: https://github.com/japaric/untry
2016-03-22std: Store flowinfo/scope_id in host byte orderAlex Crichton-6/+6
Apparently these aren't supposed to be stored in network byte order, so doing so ends up causing failures when it would otherwise succeed when stored in the host byte order. Closes #32424
2016-03-18Auto merge of #32050 - achanda:from-slice-v4, r=alexcrichtonbors-0/+12
Add an impl for From trait Converts a u8 slice to a Ipv4Addr More discussion on this here: https://github.com/rust-lang/rfcs/pull/1498#issuecomment-191921655
2016-03-19Add functions to convert IPv6 addresses from and to octetsTobias Bucher-21/+43
See also #32313.
2016-03-13Add is_documentation for IPv6Abhishek Chanda-19/+29
This function returns true if the given IPv6 is reserved for documentation. Also, reject this block in the is_global check
2016-03-13Auto merge of #32211 - achanda:ipv6-global, r=alexcrichtonbors-1/+3
Reject unspecified IP from global Also fixed the test
2016-03-12Reject unspecified and loopback IP from globalAbhishek Chanda-1/+3
2016-03-12std: Clean out deprecated APIsAlex Crichton-30/+0
Removes all unstable and deprecated APIs prior to the 1.8 release. All APIs that are deprecated in the 1.8 release are sticking around for the rest of this cycle. Some notable changes are: * The `dynamic_lib` module was moved into `rustc_back` as the compiler still relies on a few bits and pieces. * The `DebugTuple` formatter now special-cases an empty struct name with only one field to append a trailing comma.
2016-03-09Auto merge of #31618 - alexcrichton:no-thread-spawns, r=brsonbors-3/+2
Optimize some functions in std::process * Be sure that `read_to_end` gets directed towards `read_to_end_uninitialized` for all handles * When spawning a child that guaranteed doesn't need a stdin, don't actually create a stdin pipe for that process, instead just redirect it to /dev/null * When calling `wait_with_output`, don't spawn threads to read out the pipes of the child. Instead drain all pipes on the calling thread and *then* wait on the process. Functionally, it is intended that nothing changes as part of this PR --- Note that this was the same as #31613, and even after that it turned out that fixing Windows was easier than I thought! To copy a comment from over there: > As some rationale for this as well, it's always bothered me that we've spawned threads in the standard library for this (seems a bit overkill), and I've also been curious lately as to our why our build times for Windows are so much higher than Unix (on the buildbots we have). I have done basically 0 investigation into why, but I figured it can't help to try to optimize Command::output which I believe is called quite a few times during the test suite.
2016-03-08std: Funnel read_to_end through to one locationAlex Crichton-3/+2
This pushes the implementation detail of proxying `read_to_end` through to `read_to_end_uninitialized` all the way down to the `FileDesc` and `Handle` implementations on Unix/Windows. This way intermediate layers will also be able to take advantage of this optimized implementation. This commit also adds the optimized implementation for `ChildStdout` and `ChildStderr`.
2016-03-05Add an impl for From traitAbhishek Chanda-0/+12
Converts a u8 slice to a Ipv4Addr
2016-03-04Formatting changes to make tidy passAbhishek Chanda-3/+3
2016-03-04Reject the reserved block as not globalAbhishek Chanda-1/+4
2016-03-04Exclude 0.0.0.0 from the list of globally routable addressesAbhishek Chanda-17/+17
2016-03-02Fix comments and OSX buildSteven Fackler-2/+9
2016-02-28Fix windowsSteven Fackler-43/+0
Also back out keepalive support for TCP since the API is perhaps not actually what we want. You can't read the interval on Windows, and we should probably separate the functionality of turning keepalive on and overriding the interval.
2016-02-28Add UDP functionality from net2Steven Fackler-1/+252
2016-02-28Add TCP functionality from net2Steven Fackler-0/+231
2016-02-26Use .copy_from_slice() where applicableUlrik Sverdrup-2/+2
.copy_from_slice() does the same job of .clone_from_slice(), but the former is explicitly for Copy elements and calls `memcpy` directly, and thus is it efficient without optimization too.
2016-02-25Rollup merge of #31842 - dileepbapat:master, r=alexcrichtonManish Goregaokar-6/+4
I have made changes and built it after that. Please advise, https://github.com/rust-lang/rust/issues/31820
2016-02-23#31820 - Utilize `if..let` instead of single `match` branchdileepb-6/+4
2016-02-23Register new snapshotsAaron Turon-4/+4
2016-02-11Add SocketAddrV6::set_flowinfo and set_scope_idSimon Sapin-0/+28
2016-02-11Add `SocketAddr{,V4,V6}::set_ip`.Simon Sapin-3/+52
2016-02-11Add `SocketAddr{,V4,V6}::set_port`.Simon Sapin-10/+43
As demonstrated in the `resolve_socket_addr` change, this is less awkward than re-creating a new address from the other parts.
2016-02-09Revert deprecation of IpAddr, stabilizing for 1.7Aaron Turon-22/+8
After [considerable pushback](https://github.com/rust-lang/rfcs/issues/1451), it's clear that there is a community consensus around providing `IpAddr` in the standard library, together with other APIs using it. This commit reverts from deprecated status directly to stable. The deprecation landed in 1.6, which has already been released, so the stabilization is marked for 1.7 (currently in beta; will require a backport).
2016-02-04Implement ToSocketAddrs for &[SocketAddr]Steven Fackler-0/+11
2016-01-18Auto merge of #30973 - SimonSapin:patch-16, r=alexcrichtonbors-4/+4
I don’t understand what the "flow information" of an IPv6 address is, but it looks separate from the scope ID. This was probably a copy/paste error.
generated by cgit-pink 1.4.1-3-g733a5 (git 2.37.1) at 2026-02-26 03:34:07 +0000