| Age | Commit message (Collapse) | Author | Lines |
|---|
|
This patch merges the `libsync` crate into `libstd`, undoing part of the
facade. This is in preparation for ultimately merging `librustrt`, as
well as the upcoming rewrite of `sync`.
Because this removes the `libsync` crate, it is a:
[breaking-change]
However, all uses of `libsync` should be able to reroute through
`std::sync` and `std::comm` instead.
|
|
Fixes #19247.
|
|
|
|
Previously, the entire runtime API surface was publicly exposed, but
that is neither necessary nor desirable. This commit hides most of the
module, using librustrt directly as needed. The arrangement will need to
be revisited when rustrt is pulled into std.
[breaking-change]
|
|
|
|
Previously, sync::mutex had to split between green and native runtime
systems and thus could not simply use the native mutex facility.
This commit rewrites sync::mutex to link directly to native mutexes; in
the future, the two will probably be coalesced into a single
module (once librustrt is pulled into libstd wholesale).
|
|
This breaks code that referred to variant names in the same namespace as
their enum. Reexport the variants in the old location or alter code to
refer to the new locations:
```
pub enum Foo {
A,
B
}
fn main() {
let a = A;
}
```
=>
```
pub use self::Foo::{A, B};
pub enum Foo {
A,
B
}
fn main() {
let a = A;
}
```
or
```
pub enum Foo {
A,
B
}
fn main() {
let a = Foo::A;
}
```
[breaking-change]
|
|
I found some occurrences of "failure" and "fails" in the documentation. I changed them to "panics" if it means a task panic. Otherwise I left it as is, or changed it to "errors" to clearly distinguish them.
Also, I made a minor fix that is breaking the layout of a module page. "Example" is shown in an irrelevant place from the following page: http://doc.rust-lang.org/std/os/index.html
|
|
|
|
Throughout the docs, "failure" was replaced with "panics" if it means a
task panic. Otherwise, it remained as is, or changed to "errors" to
clearly differentiate it from a task panic.
|
|
This makes the low-level allocation API suitable for use cases where
out-of-memory conditions need to be handled.
Closes #18292
[breaking-change]
|
|
As part of the collections reform RFC, this commit removes all collections
traits in favor of inherent methods on collections themselves. All methods
should continue to be available on all collections.
This is a breaking change with all of the collections traits being removed and
no longer being in the prelude. In order to update old code you should move the
trait implementations to inherent implementations directly on the type itself.
Note that some traits had default methods which will also need to be implemented
to maintain backwards compatibility.
[breaking-change]
cc #18424
|
|
Conflicts:
src/libcollections/vec.rs
|
|
Conflicts:
src/libcollections/slice.rs
src/libcore/failure.rs
src/libsyntax/parse/token.rs
src/test/debuginfo/basic-types-mut-globals.rs
src/test/debuginfo/simple-struct.rs
src/test/debuginfo/trait-pointers.rs
|
|
This commit enables implementations of IndexMut for a number of collections,
including Vec, RingBuf, SmallIntMap, TrieMap, TreeMap, and HashMap. At the same
time this deprecates the `get_mut` methods on vectors in favor of using the
indexing notation.
cc #18424
|
|
https://github.com/rust-lang/rfcs/pull/221
The current terminology of "task failure" often causes problems when
writing or speaking about code. You often want to talk about the
possibility of an operation that returns a Result "failing", but cannot
because of the ambiguity with task failure. Instead, you have to speak
of "the failing case" or "when the operation does not succeed" or other
circumlocutions.
Likewise, we use a "Failure" header in rustdoc to describe when
operations may fail the task, but it would often be helpful to separate
out a section describing the "Err-producing" case.
We have been steadily moving away from task failure and toward Result as
an error-handling mechanism, so we should optimize our terminology
accordingly: Result-producing functions should be easy to describe.
To update your code, rename any call to `fail!` to `panic!` instead.
Assuming you have not created your own macro named `panic!`, this
will work on UNIX based systems:
grep -lZR 'fail!' . | xargs -0 -l sed -i -e 's/fail!/panic!/g'
You can of course also do this by hand.
[breaking-change]
|
|
|
|
Spring cleaning is here! In the Fall! This commit removes quite a large amount
of deprecated functionality from the standard libraries. I tried to ensure that
only old deprecated functionality was removed.
This is removing lots and lots of deprecated features, so this is a breaking
change. Please consult the deprecation messages of the deleted code to see how
to migrate code forward if it still needs migration.
[breaking-change]
|
|
let mut value = mutex.lock();
warning: variable does not need to be mutable
|
|
compiletest: compact "linux" "macos" etc.as "unix".
liballoc: remove a superfluous "use".
libcollections: remove invocations of deprecated methods in favor of
their suggested replacements and use "_" for a loop counter.
libcoretest: remove invocations of deprecated methods; also add
"allow(deprecated)" for testing a deprecated method itself.
libglob: use "cfg_attr".
libgraphviz: add a test for one of data constructors.
libgreen: remove a superfluous "use".
libnum: "allow(type_overflow)" for type cast into u8 in a test code.
librustc: names of static variables should be in upper case.
libserialize: v[i] instead of get().
libstd/ascii: to_lowercase() instead of to_lower().
libstd/bitflags: modify AnotherSetOfFlags to use i8 as its backend.
It will serve better for testing various aspects of bitflags!.
libstd/collections: "allow(deprecated)" for testing a deprecated
method itself.
libstd/io: remove invocations of deprecated methods and superfluous "use".
Also add #[test] where it was missing.
libstd/num: introduce a helper function to effectively remove
invocations of a deprecated method.
libstd/path and rand: remove invocations of deprecated methods and
superfluous "use".
libstd/task and libsync/comm: "allow(deprecated)" for testing
a deprecated method itself.
libsync/deque: remove superfluous "unsafe".
libsync/mutex and once: names of static variables should be in upper case.
libterm: introduce a helper function to effectively remove
invocations of a deprecated method.
We still see a few warnings about using obsoleted native::task::spawn()
in the test modules for libsync. I'm not sure how I should replace them
with std::task::TaksBuilder and native::task::NativeTaskBuilder
(dependency to libstd?)
Signed-off-by: NODA, Kai <nodakai@gmail.com>
|
|
Also convert a number of `static mut` to just a plain old `static` and remove
some unsafe blocks.
|
|
This change is an implementation of [RFC 69][rfc] which adds a third kind of
global to the language, `const`. This global is most similar to what the old
`static` was, and if you're unsure about what to use then you should use a
`const`.
The semantics of these three kinds of globals are:
* A `const` does not represent a memory location, but only a value. Constants
are translated as rvalues, which means that their values are directly inlined
at usage location (similar to a #define in C/C++). Constant values are, well,
constant, and can not be modified. Any "modification" is actually a
modification to a local value on the stack rather than the actual constant
itself.
Almost all values are allowed inside constants, whether they have interior
mutability or not. There are a few minor restrictions listed in the RFC, but
they should in general not come up too often.
* A `static` now always represents a memory location (unconditionally). Any
references to the same `static` are actually a reference to the same memory
location. Only values whose types ascribe to `Sync` are allowed in a `static`.
This restriction is in place because many threads may access a `static`
concurrently. Lifting this restriction (and allowing unsafe access) is a
future extension not implemented at this time.
* A `static mut` continues to always represent a memory location. All references
to a `static mut` continue to be `unsafe`.
This is a large breaking change, and many programs will need to be updated
accordingly. A summary of the breaking changes is:
* Statics may no longer be used in patterns. Statics now always represent a
memory location, which can sometimes be modified. To fix code, repurpose the
matched-on-`static` to a `const`.
static FOO: uint = 4;
match n {
FOO => { /* ... */ }
_ => { /* ... */ }
}
change this code to:
const FOO: uint = 4;
match n {
FOO => { /* ... */ }
_ => { /* ... */ }
}
* Statics may no longer refer to other statics by value. Due to statics being
able to change at runtime, allowing them to reference one another could
possibly lead to confusing semantics. If you are in this situation, use a
constant initializer instead. Note, however, that statics may reference other
statics by address, however.
* Statics may no longer be used in constant expressions, such as array lengths.
This is due to the same restrictions as listed above. Use a `const` instead.
[breaking-change]
Closes #17718
[rfc]: https://github.com/rust-lang/rfcs/pull/246
|
|
|
|
This reverts commit 2288f332301b9e22db2890df256322650a7f3445.
|
|
|
|
|
|
Replace `#[ignore(cfg(a, b))]` with `#[cfg_attr(all(a, b), ignore)]`
|
|
|
|
As per [RFC
52](https://github.com/rust-lang/rfcs/blob/master/active/0052-ownership-variants.md),
use `_mut` suffixes to mark mutable variants, and `into_iter` for moving
iterators.
[breaking-change]
|
|
|
|
|
|
|
|
Per API meeting
https://github.com/rust-lang/meeting-minutes/blob/master/Meeting-API-review-2014-08-13.md
# Changes to `core::option`
Most of the module is marked as stable or unstable; most of the unstable items are awaiting resolution of conventions issues.
However, a few methods have been deprecated, either due to lack of use or redundancy:
* `take_unwrap`, `get_ref` and `get_mut_ref` (redundant, and we prefer for this functionality to go through an explicit .unwrap)
* `filtered` and `while`
* `mutate` and `mutate_or_set`
* `collect`: this functionality is being moved to a new `FromIterator` impl.
# Changes to `core::result`
Most of the module is marked as stable or unstable; most of the unstable items are awaiting resolution of conventions issues.
* `collect`: this functionality is being moved to a new `FromIterator` impl.
* `fold_` is deprecated due to lack of use
* Several methods found in `core::option` are added here, including `iter`, `as_slice`, and variants.
Due to deprecations, this is a:
[breaking-change]
|
|
|
|
|
|
|
|
Add a short explanation of what tx and rx mean in terms of channels.
|
|
of `use bar as foo`.
Change all uses of `use foo = bar` to `use bar as foo`.
Implements RFC #47.
Closes #16461.
[breaking-change]
|
|
declared with the same name in the same scope.
This breaks several common patterns. First are unused imports:
use foo::bar;
use baz::bar;
Change this code to the following:
use baz::bar;
Second, this patch breaks globs that import names that are shadowed by
subsequent imports. For example:
use foo::*; // including `bar`
use baz::bar;
Change this code to remove the glob:
use foo::{boo, quux};
use baz::bar;
Or qualify all uses of `bar`:
use foo::{boo, quux};
use baz;
... baz::bar ...
Finally, this patch breaks code that, at top level, explicitly imports
`std` and doesn't disable the prelude.
extern crate std;
Because the prelude imports `std` implicitly, there is no need to
explicitly import it; just remove such directives.
The old behavior can be opted into via the `import_shadowing` feature
gate. Use of this feature gate is discouraged.
This implements RFC #116.
Closes #16464.
[breaking-change]
|
|
|
|
|
|
This leaves the `Share` trait at `std::kinds` via a `#[deprecated]` `pub use`
statement, but the `NoShare` struct is no longer part of `std::kinds::marker`
due to #12660 (the build cannot bootstrap otherwise).
All code referencing the `Share` trait should now reference the `Sync` trait,
and all code referencing the `NoShare` type should now reference the `NoSync`
type. The functionality and meaning of this trait have not changed, only the
naming.
Closes #16281
[breaking-change]
|
|
This commit stabilizes the `std::sync::atomics` module, renaming it to
`std::sync::atomic` to match library precedent elsewhere, and tightening
up behavior around incorrect memory ordering annotations.
The vast majority of the module is now `stable`. However, the
`AtomicOption` type has been deprecated, since it is essentially unused
and is not truly a primitive atomic type. It will eventually be replaced
by a higher-level abstraction like MVars.
Due to deprecations, this is a:
[breaking-change]
|
|
|
|
The current spsc implementation doesn't enforce single-producer
single-consumer usage and also allows unsafe memory use through
peek & pop.
For safer usage, `spsc_queue::queue` now returns a pair of owned objects which
only allow consumer or producer behaviours through an `Arc`.
Through restricting the mutability of the receiver to `mut` the
peek and pop behaviour becomes safe again, with the compiler
complaining about usage which could lead to problems.
To fix code broken from this, update:
Queue::new(x) -> unsafe { Queue::new(x) }
[breaking-change]
|
|
This commit applies stability attributes to the contents of these modules,
summarized here:
* The `unit` and `bool` modules have become #[unstable] as they are purely meant
for documentation purposes and are candidates for removal.
* The `ty` module has been deprecated, and the inner `Unsafe` type has been
renamed to `UnsafeCell` and moved to the `cell` module. The `marker1` field
has been removed as the compiler now always infers `UnsafeCell` to be
invariant. The `new` method i stable, but the `value` field, `get` and
`unwrap` methods are all unstable.
* The `tuple` module has its name as stable, the naming of the `TupleN` traits
as stable while the methods are all #[unstable]. The other impls in the module
have appropriate stability for the corresponding trait.
* The `arc` module has received the exact same treatment as the `rc` module
previously did.
* The `any` module has its name as stable. The `Any` trait is also stable, with
a new private supertrait which now contains the `get_type_id` method. This is
to make the method a private implementation detail rather than a public-facing
detail.
The two extension traits in the module are marked #[unstable] as they will not
be necessary with DST. The `is` method is #[stable], the as_{mut,ref} methods
have been renamed to downcast_{mut,ref} and are #[unstable].
The extension trait `BoxAny` has been clarified as to why it is unstable as it
will not be necessary with DST.
This is a breaking change because the `marker1` field was removed from the
`UnsafeCell` type. To deal with this change, you can simply delete the field and
only specify the value of the `data` field in static initializers.
[breaking-change]
|
|
Semaphores are not currently designed to handle this case correctly, leading to
very strange behavior. Semaphores as written are intended to count *resources*
and it's not possible to have a negative number of resources.
This alters the behavior and documentation to note that the task will be failed
if the initial count is 0.
Closes #15758
|
|
Implement for Vec, DList, RingBuf. Add MutableSeq to the prelude.
Since the collections traits are in the prelude most consumers of
these methods will continue to work without change.
[breaking-change]
|
|
Semaphores are not currently designed to handle this case correctly, leading to
very strange behavior. Semaphores as written are intended to count *resources*
and it's not possible to have a negative number of resources.
This alters the behavior and documentation to note that the task will be failed
if the initial count is 0.
Closes #15758
|
|
This branch of try_send() just forgot to wake up any receiver waiting for data.
Closes #15761
|
