| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Both GCC and Clang write by default a `.comment` section with compiler
information:
```txt
$ gcc -c -xc /dev/null && readelf -p '.comment' null.o
String dump of section '.comment':
[ 1] GCC: (GNU) 11.2.0
$ clang -c -xc /dev/null && readelf -p '.comment' null.o
String dump of section '.comment':
[ 1] clang version 14.0.1 (https://github.com/llvm/llvm-project.git c62053979489ccb002efe411c3af059addcb5d7d)
```
They also implement the `-Qn` flag to avoid doing so:
```txt
$ gcc -Qn -c -xc /dev/null && readelf -p '.comment' null.o
readelf: Warning: Section '.comment' was not dumped because it does not exist!
$ clang -Qn -c -xc /dev/null && readelf -p '.comment' null.o
readelf: Warning: Section '.comment' was not dumped because it does not exist!
```
So far, `rustc` only does it for WebAssembly targets and only
when debug info is enabled:
```txt
$ echo 'fn main(){}' | rustc --target=wasm32-unknown-unknown --emit=llvm-ir -Cdebuginfo=2 - && grep llvm.ident rust_out.ll
!llvm.ident = !{!27}
```
In the RFC part of this PR it was decided to always add
the information, which gets us closer to other popular compilers.
An opt-out flag like GCC and Clang may be added later on if deemed
necessary.
Implementation-wise, this covers both `ModuleLlvm::new()` and
`ModuleLlvm::new_metadata()` cases by moving the addition to
`context::create_module` and adds a few test cases.
ThinLTO also sees the `llvm.ident` named metadata duplicated (in
temporary outputs), so this deduplicates it like it is done for
`wasm.custom_sections`. The tests also check this duplication does
not take place.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
`assume`s
|
|
Turn copy into moves during DSE.
Dead store elimination computes whether removing a direct store to an unborrowed place is allowed.
Where removing a store is allowed, writing `uninit` is too.
This means that we can use this pass to transform `copy` operands into `move` operands. This is only interesting in call terminators, so we only handle those.
Special care is taken for the `use_both(_1, _1)` case:
- moving the second argument is ok, as `_1` is not live after the call;
- moving the first argument is not, as the second argument reads `_1`.
Fixes #75993
Fixes https://github.com/rust-lang/rust/issues/108068
r? `@RalfJung`
cc `@JakobDegen`
|
|
|
|
|
|
|
|
at the crate level.
When `no_builtins` is applied at the crate level, we should add the
`no-builtins` attribute to each function to ensure it takes effect in LTO.
|
|
Resurrect: rustc_target: Add alignment to indirectly-passed by-value types, correcting the alignment of byval on x86 in the process.
Same as #111551, which I [accidentally closed](https://github.com/rust-lang/rust/pull/111551#issuecomment-1571222612) :/
---
This resurrects PR #103830, which has sat idle for a while.
Beyond #103830, this also:
- fixes byval alignment for types containing vectors on Darwin (see `tests/codegen/align-byval-vector.rs`)
- fixes byval alignment for overaligned types on x86 Windows (see `tests/codegen/align-byval.rs`)
- fixes ABI for types with 128bit requested alignment on ARM64 Linux (see `tests/codegen/aarch64-struct-align-128.rs`)
r? `@nikic`
---
`@pcwalton's` original PR description is reproduced below:
Commit 88e4d2c from five years ago removed
support for alignment on indirectly-passed arguments because of problems with
the `i686-pc-windows-msvc` target. Unfortunately, the `memcpy` optimizations I
recently added to LLVM 16 depend on this to forward `memcpy`s. This commit
attempts to fix the problems with `byval` parameters on that target and now
correctly adds the `align` attribute.
The problem is summarized in [this comment] by `@eddyb.` Briefly, 32-bit x86 has
special alignment rules for `byval` parameters: for the most part, their
alignment is forced to 4. This is not well-documented anywhere but in the Clang
source. I looked at the logic in Clang `TargetInfo.cpp` and tried to replicate
it here. The relevant methods in that file are
`X86_32ABIInfo::getIndirectResult()` and
`X86_32ABIInfo::getTypeStackAlignInBytes()`. The `align` parameter attribute
for `byval` parameters in LLVM must match the platform ABI, or miscompilations
will occur. Note that this doesn't use the approach suggested by eddyb, because
I felt it was overkill to store the alignment in `on_stack` when special
handling is really only needed for 32-bit x86.
As a side effect, this should fix #80127, because it will make the `align`
parameter attribute for `byval` parameters match the platform ABI on LLVM
x86-64.
[this comment]: #80822 (comment)
|
|
|
|
Enable MIR reference propagation by default
|
|
|
|
|
|
|
|
|
|
|
|
repr(transparent)
|
|
|
|
|
|
|
|
x86 Windows also should not use byval since the struct is
overaligned, see https://reviews.llvm.org/D72114
|
|
|
|
|
|
|
|
|
|
alignment of `byval` on x86 in the process.
Commit 88e4d2c2918428d55e34cd57c11279ea839c8822 from five years ago removed
support for alignment on indirectly-passed arguments because of problems with
the `i686-pc-windows-msvc` target. Unfortunately, the `memcpy` optimizations I
recently added to LLVM 16 depend on this to forward `memcpy`s. This commit
attempts to fix the problems with `byval` parameters on that target and now
correctly adds the `align` attribute.
The problem is summarized in [this comment] by @eddyb. Briefly, 32-bit x86 has
special alignment rules for `byval` parameters: for the most part, their
alignment is forced to 4. This is not well-documented anywhere but in the Clang
source. I looked at the logic in Clang `TargetInfo.cpp` and tried to replicate
it here. The relevant methods in that file are
`X86_32ABIInfo::getIndirectResult()` and
`X86_32ABIInfo::getTypeStackAlignInBytes()`. The `align` parameter attribute
for `byval` parameters in LLVM must match the platform ABI, or miscompilations
will occur. Note that this doesn't use the approach suggested by eddyb, because
I felt it was overkill to store the alignment in `on_stack` when special
handling is really only needed for 32-bit x86.
As a side effect, this should fix #80127, because it will make the `align`
parameter attribute for `byval` parameters match the platform ABI on LLVM
x86-64.
[this comment]: https://github.com/rust-lang/rust/pull/80822#issuecomment-829985417
|
|
|
|
|
|
r=Mark-Simulacrum
Add Tests for native wasm exceptions
### Motivation
In PR #111322, I added support for native WASM exceptions. I was asked by ``@davidtwco`` to add some tests for it in a follow up PR, which seems like a very good idea.
This PR adds three tests for this feature:
* codegen: ensure the correct LLVM instructions are used
* assembly: ensure the correct WASM instructions are used
* run-make: ensure the exception handling works; the WASM code is run using a small nodejs script which demonstrates the exception handling
### Complications
There are a few changes beside adding the tests, which were necessary
* Tests for the wasm32-unknown-unknown target are (as far as I know) only run on `test-various`. Its docker image uses nodejs-15, which is very old. Experimental support for wasm-exceptions was added in nodejs16. In nodejs 18.12 (LTS), they are stable.
- --> increase nodejs to 18.12 in `test-various`
* codegen/assembly tests are not performed for the wasm32-unknown-unknown target yet
- --> add those to `test-various` as well
Due to the last point, some tests are run which have not run before (assembly+codegen tests for wasm32-unknown-unknown). I added `// ignore wasm32-bare` for those which failed
### Local testing
I run all tests locally using both `test-various` and `wasm32`. As far as I know, none of the other systems run any test for wasm32 targets.
|
|
|
|
|
|
|
|
cg_llvm: use index-based loop in write_operand_repeatedly
This should be easier for LLVM to analyze.
Fixes #111603
This needs a perf run.
[cc](https://github.com/rust-lang/rust/issues/111603#issuecomment-1567531178) `@caojoshua`
|
|
r=compiler-errors
Various impl trait in assoc tys cleanups
r? `@compiler-errors`
All commits except for the last are pure refactorings. 274dab5bd658c97886a8987340bf50ae57900c39 allows struct fields to participate in deciding whether a function has an opaque in its signature.
best reviewed commit by commit
|
|
Rollup of 8 pull requests
Successful merges:
- #112616 (Improve tests on targets without unwinding)
- #112643 (Always register sized obligation for argument)
- #112740 (Add link to rustdoc book search chapter in help popover)
- #112810 (Don't ICE on unnormalized struct tail in layout computation)
- #112870 (Migrate `item_bounds` to `ty::Clause`)
- #112925 (Stop hiding const eval limit in external macros)
- #112960 ([tests/rustdoc] Add `@files` command)
- #112962 (Fix rustdoc gui tester)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
Improve tests on targets without unwinding
This PR makes more miscellaneous changes to tests, to make it work on targets without unwinding support.
|
|
|
|
|
|
|
|
[libs] Simplify `unchecked_{shl,shr}`
There's no need for the `const_eval_select` dance here. And while I originally wrote the `.try_into().unwrap_unchecked()` implementation here, it's kinda a mess in MIR -- this new one is substantially simpler, as shown by the old one being above the inlining threshold but the new one being below it in the `mir-opt/inline/unchecked_shifts` tests.
We don't need `u32::checked_shl` doing a dance through both `Result` *and* `Option` 🙃
|
|
There's no need for the `const_eval_select` dance here. And while I originally wrote the `.try_into().unwrap_unchecked()` implementation here, it's kinda a mess in MIR -- this new one is substantially simpler, as shown by the old one being above the inlining threshold but the new one being below it.
|
|
Support 128-bit enum variant in debuginfo codegen
fixes #111600
|
|
this seems to produce less IR
|
|
|
|
|
|
This is easier for LLVM to analyze.
|
|
|
|
|
|
|
|
To confirm we're not just helping `mem::swap`
|
|
Fix codegen test suite for bare-metal-like targets
For Ferrocene I needed to run the test suite for custom target with no unwinding and static relocation. Running the tests uncovered ~20 failures due to the test suite not accounting for these options. This PR fixes them by:
* Fixing `CHECK`s to account for functions having extra LLVM IR attributes (in this case `nounwind`).
* Fixing `CHECK`s to account for the `dso_local` LLVM IR modifier, which is [added to every item when relocation is static](https://github.com/rust-lang/rust/blob/f3d597b31c0f101a02c230798afa31a36bdacbc6/compiler/rustc_codegen_llvm/src/mono_item.rs#L139-L142).
* Fixing `CHECK`s to account for missing `uwtables` attributes.
* Added the `needs-unwind` attributes for tests that are designed to check unwinding.
There is no part of Rust CI that checks this unfortunately, and testing whether the PR works locally is kinda hard because you need a target with std enabled but no unwinding and static relocations. Still, this works in my local testing, and if future PRs accidentally break this Ferrocene will take care of sending followup PRs.
|
