| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Fix backtraces with `-C panic=abort` on linux; emit unwind tables by default
The linux backtrace unwinder relies on unwind tables to work properly, and generating and printing a backtrace is done by for example the default panic hook.
Begin emitting unwind tables by default again with `-C panic=abort` (see history below) so that backtraces work.
Closes https://github.com/rust-lang/rust/issues/81902 which is **regression-from-stable-to-stable**
Closes https://github.com/rust-lang/rust/issues/94815
### History
Backtraces with `-C panic=abort` used to work in Rust 1.22 but broke in Rust 1.23, because in 1.23 we stopped emitting unwind tables with `-C panic=abort` (see https://github.com/rust-lang/rust/pull/45031 and https://github.com/rust-lang/rust/issues/81902#issuecomment-3046487084).
In 1.45 a workaround in the form of `-C force-unwind-tables=yes` was added (see https://github.com/rust-lang/rust/pull/69984).
`-C panic=abort` was added in [Rust 1.10](https://blog.rust-lang.org/2016/07/07/Rust-1.10/#what-s-in-1-10-stable) and the motivation was binary size and compile time. But given how confusing that behavior has turned out to be, it is better to make binary size optimization opt-in with `-C force-unwind-tables=no` rather than default since the current default breaks backtraces.
Besides, if binary size is a primary concern, there are many other tricks that can be used that has a higher impact.
# Release Note Entry Draft:
## Compatibility Notes
* [Fix backtraces with `-C panic=abort` on Linux by generating unwind tables by default](https://github.com/rust-lang/rust/pull/143613). Build with `-C force-unwind-tables=no` to keep omitting unwind tables.
try-job: aarch64-apple
try-job: armhf-gnu
try-job: aarch64-msvc-1
|
|
The linux backtrace unwinder relies on unwind tables to work properly,
and generating and printing a backtrace is done by for example the
default panic hook.
Begin emitting unwind tables by default again with `-C panic=abort` (see
history below) so that backtraces work.
History
=======
Backtraces with `-C panic=abort` used to work in Rust 1.22 but broke in
Rust 1.23, because in 1.23 we stopped emitting unwind tables with `-C
panic=abort` (see 24cc38e3b00).
In 1.45 (see cda994633ee) a workaround in the form
of `-C force-unwind-tables=yes` was added.
`-C panic=abort` was added in [Rust
1.10](https://blog.rust-lang.org/2016/07/07/Rust-1.10/#what-s-in-1-10-stable)
and the motivation was binary size and compile time. But given how
confusing that behavior has turned out to be, it is better to make
binary size optimization opt-in with `-C force-unwind-tables=no` rather
than default since the current default breaks backtraces.
Besides, if binary size is a primary concern, there are many other
tricks that can be used that has a higher impact.
|
|
|
|
To reduce risk of regressing on generating debuginfo e.g. in the form of
ICE:s. This will also ensure that future ui tests support different
debuginfo levels.
When I looked at run time for different CI jobs, **x86_64-gnu-debug**
was far from the bottle neck, so it should be fine to make it perform
more work.
|
|
`panic!` does not print any identifying information for threads that are
unnamed. However, in many cases, the thread ID can be determined.
This changes the panic message from something like this:
thread '<unnamed>' panicked at src/main.rs:3:5:
explicit panic
To something like this:
thread '<unnamed>' (0xff9bf) panicked at src/main.rs:3:5:
explicit panic
Stack overflow messages are updated as well.
This change applies to both named and unnamed threads. The ID printed is
the OS integer thread ID rather than the Rust thread ID, which should
also be what debuggers print.
|
|
And introduce two new directives for ui tests:
* `run-crash`
* `run-fail-or-crash`
Normally a `run-fail` ui test like tests that panic shall not be
terminated by a signal like `SIGABRT`. So begin having that as a hard
requirement.
Some of our current tests do terminate by a signal/crash however.
Introduce and use `run-crash` for those tests. Note that Windows crashes
are not handled by signals but by certain high bits set on the process
exit code. Example exit code for crash on Windows: `0xc000001d`.
Because of this, we define "crash" on all platforms as "not exit with
success and not exit with a regular failure code in the range 1..=127".
Some tests behave differently on different targets:
* Targets without unwind support will abort (crash) instead of exit with
failure code 101 after panicking. As a special case, allow crashes for
`run-fail` tests for such targets.
* Different sanitizer implementations handle detected memory problems
differently. Some abort (crash) the process while others exit with
failure code 1. Introduce and use `run-fail-or-crash` for such tests.
|
|
Only run the panic=unwind tests on platforms that support unwinding.
|
|
tests: Add `RUST_BACKTRACE` and `-Cpanic` revisions to `panic-main.rs` test
This is a regression test for rust-lang/rust#123733 (**P-high** and **regression-from-stable-to-stable**) which was [fixed by accident without a regression test](https://github.com/rust-lang/rust/issues/123733#issuecomment-2929091266).
Edit 2025-06-23:
Closes https://github.com/rust-lang/rust/issues/123733
|
|
`tests/ui`: A New Order [28/28] FINAL PART
> [!NOTE]
>
> Intermediate commits are intended to help review, but will be squashed prior to merge.
Some `tests/ui/` housekeeping, to trim down number of tests directly under `tests/ui/`. Part of rust-lang/rust#133895.
r? ``@tgross35``
|
|
|
|
`tests/ui`: A New Order [23/N]
> [!NOTE]
>
> Intermediate commits are intended to help review, but will be squashed prior to merge.
Some `tests/ui/` housekeeping, to trim down number of tests directly under `tests/ui/`. Part of rust-lang/rust#133895.
r? ``@tgross35``
|
|
|
|
|
|
opeq.rs was removed as duplicating test logic in other tests
|
|
|
|
|
|
|
|
location-detail-unwrap-multiline.rs
|
|
|
|
|
|
This especially improves the developer experience for long chains
of function calls that span multiple lines, which is common with
builder patterns, chains of iterator/future combinators, etc.
|
|
and migrate most of remaining `error-pattern`s to it.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Signed-off-by: peicuiping <ezc5@sina.cn>
|
|
|
|
Add more `begin_panic` normalizations to panic backtrace tests
Since #123244, these tests have started failing locally on some systems (#133997) due to minor variations in how `begin_panic` is printed in the backtrace.
The variation appears to occur on macOS when `rust.debuginfo-level = "line-tables-only"` is set, which is the default in `config.compiler.toml`. It does not occur when the debuginfo level is set to 1.
The variation doesn't seem relevant to these tests, so this PR simply adds another custom normalization rule to account for the variation.
---
Will conflict with #134759.
|
|
|
|
when running `tests/ui/panics/default-backtrace-ice.rs locally it gave this error:
```
failures:
---- [ui] tests/ui/panics/default-backtrace-ice.rs stdout ----
Saved the actual stderr to "/home/jyn/src/rust3/build/x86_64-unknown-linux-gnu/test/ui/panics/default-backtrace-ice/default-backtrace-ice.stderr"
diff of stderr:
7
8 aborting due to `-Z treat-err-as-bug=1`
9 stack backtrace:
- (end_short_backtrace)
- (begin_short_backtrace)
- (end_short_backtrace)
- (begin_short_backtrace)
+ [... omitted 22 frames ...]
+
```
this is a regression from setting RUST_BACKTRACE=1 by default. we need to turn off the new behavior when running UI tests so that they reflect our dist compiler. normally that's done by checking `sess.unstable_opts.ui_testing`, but this happens extremely early in the compiler before we've expanded arg files. do an extremely simple hack that doesn't work in all cases - we don't need it to work in all cases, only when running UI tests.
|
|
|
|
This reduces code sizes and better respects programmer intent when
marking inline(never). Previously such a marking was essentially ignored
for generic functions, as we'd still inline them in remote crates.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Test wasm32-wasip1 in CI, not wasm32-unknown-unknown
This commit changes CI to no longer test the `wasm32-unknown-unknown` target and instead test the `wasm32-wasip1` target. There was some discussion of this in a [Zulip thread], and the motivations for this PR are:
* Runtime failures on `wasm32-unknown-unknown` print nothing, meaning all you get is "something failed". In contrast `wasm32-wasip1` can print to stdout/stderr.
* The unknown-unknown target is missing lots of pieces of libstd, and while `wasm32-wasip1` is also missing some pieces (e.g. threads) it's missing fewer pieces. This means that many more tests can be run.
Overall my hope is to improve the debuggability of wasm failures on CI and ideally be a bit less of a maintenance burden.
This commit specifically removes the testing of `wasm32-unknown-unknown` and replaces it with testing of `wasm32-wasip1`. Along the way there were a number of other archiectural changes made as well, including:
* A new `target.*.runtool` option can now be specified in `config.toml` which is passed as `--runtool` to `compiletest`. This is used to reimplement execution of WebAssembly in a less-wasm-specific fashion.
* The default value for `runtool` is an ambiently located WebAssembly runtime found on the system, if any. I've implemented logic for Wasmtime.
* Existing testing support for `wasm32-unknown-unknown` and Emscripten has been removed. I'm not aware of Emscripten testing being run any time recently and otherwise `wasm32-wasip1` is in theory the focus now.
* I've added a new `//@ needs-threads` directive for `compiletest` and classified a bunch of wasm-ignored tests as needing threads. In theory these tests can run on `wasm32-wasi-preview1-threads`, for example.
* I've tried to audit all existing tests that are either `ignore-emscripten` or `ignore-wasm*`. Many now run on `wasm32-wasip1` due to being able to emit error messages, for example. Many are updated with comments as to why they can't run as well.
* The `compiletest` output matching for `wasm32-wasip1` automatically uses "match a subset" mode implemented in `compiletest`. This is because WebAssembly runtimes often add extra information on failure, such as the `unreachable` instruction in `panic!`, which isn't able to be matched against the golden output from native platforms.
* I've ported most existing `run-make` tests that use custom Node.js wrapper scripts to the new run-make-based-in-Rust infrastructure. To do this I added `wasmparser` as a dependency of `run-make-support` for the various wasm tests to use that parse wasm files. The one test that executed WebAssembly now uses `wasmtime`-the-CLI to execute the test instead. I have not ported over an exception-handling test as Wasmtime doesn't implement this yet.
* I've updated the `test` crate to print out timing information for WASI targets as it can do that (gets a previously ignored test now passing).
* The `test-various` image now builds a WASI sysroot for the WASI target and additionally downloads a fixed release of Wasmtime, currently the latest one at 18.0.2, and uses that for testing.
[Zulip thread]: https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Have.20wasm.20tests.20ever.20caused.20problems.20on.20CI.3F/near/424317944
|
|
* The WASI targets deal with the `main` symbol a bit differently than
native so some `codegen` and `assembly` tests have been ignored.
* All `ignore-emscripten` directives have been updated to
`ignore-wasm32` to be more clear that all wasm targets are ignored and
it's not just Emscripten.
* Most `ignore-wasm32-bare` directives are now gone.
* Some ignore directives for wasm were switched to `needs-unwind`
instead.
* Many `ignore-wasm32*` directives are removed as the tests work with
WASI as opposed to `wasm32-unknown-unknown`.
|
|
|
|
Remove `feed_local_def_id`
best reviewed commit by commit
Basically I returned `TyCtxtFeed` from `create_def` and then preserved that in the local caches
based on https://github.com/rust-lang/rust/pull/121084
r? ````@petrochenkov````
|
|
This commit is extracted from #122036 and adds a new directive to the
`compiletest` test runner, `//@ needs-threads`. This is intended to
capture the need that a target must implement threading to execute a
specific test, typically one that uses `std::thread`. This is primarily
done for WebAssembly targets which currently do not have threads by
default. This enables transitioning a lot of `//@ ignore-wasm*`-style
ignores into a more self-documenting `//@ needs-threads` directive.
Additionally the `wasm32-wasi-preview1-threads` target, for example,
does actually have threads, but isn't tested in CI at this time. This
change enables running these tests for that target, but not other wasm
targets.
|
|
|
|
|
|
Errors in `DiagCtxtInner::emit_diagnostic` are never set to
`Level::Bug`, because the condition never succeeds, because
`self.treat_err_as_bug()` is called *before* the error counts are
incremented.
This commit switches to `self.treat_next_err_as_bug()`, fixing the
problem. This changes the error message output to actually say "internal
compiler error".
|
