| Age | Commit message (Collapse) | Author | Lines |
|---|
|
|
|
I also double-checked that everything looks good on some real-world
crates.
|
|
Some cases that are currently handled incorrectly.
|
|
|
|
|
|
|
|
|
|
By allowing long names to overlap with the "Uses" field when it has
spare space. This avoids unnecessary line breaks in the output.
|
|
With a long macro name that could fit on one line, but currently isn't
formatted that way, because the name would overlap with the maximum
width of the "Uses" column. (The next commit will fix this.)
|
|
|
|
Tweak `-Zmacro-stats` measurement.
It currently reports net size, i.e. size(output) - size(input). After some use I think this is sub-optimal, and it's better to just report size(output). Because for derive macros the input size is always 1, and for attribute macros it's almost always 1.
r? ```@petrochenkov```
|
|
To make it match `-Zmacro-stats`, and work better if you have enabled it
for multiple crates.
- Print each crate's name.
- Print a `===` banner at the start and end for separation.
|
|
Currently they have the largest items at the end. I believe the
rationale is that it saves you scrolling up through terminal output
because the important stuff is at the bottom. But it's also surprising
and a bit confusing, and I think the obvious order (big things at the
top) is better.
|
|
It currently reports net size, i.e. size(output) - size(input). After
some use I think this is sub-optimal, and it's better to just report
size(output). Because for derive macros the input size is always 1, and
for attribute macros it's almost always 1.
|
|
Tracking the old name of renamed unstable library features
This PR resolves the first problem of rust-lang/rust#141617 : tracking renamed unstable features. The first commit is to add a ui test, and the second one tracks the changes. I will comment on the code for clarification.
r? `@jdonszelmann`
There have been a lot of PR's reviewed by you lately, thanks for your time!
cc `@jyn514`
|
|
Signed-off-by: xizheyin <xizheyin@smail.nju.edu.cn>
|
|
It collects data about macro expansions and prints them in a table after
expansion finishes. It's very useful for detecting macro bloat,
especially for proc macros.
Details:
- It measures code snippets by pretty-printing them and then measuring
lines and bytes. This required a bunch of additional pretty-printing
plumbing, in `rustc_ast_pretty` and `rustc_expand`.
- The measurement is done in `MacroExpander::expand_invoc`.
- The measurements are stored in `ExtCtxt::macro_stats`.
|
|
They're very little value, because they only measure the top-level
`main.rs` or `lib.rs` file. (Other `.rs` files don't get read and parsed
until expansion occurs.)
I saw an example recently where the pre-expansion AST was 3KB in size
and the post-expansion AST was 66MB.
I kept the "POST EXPANSION" in the output header, I think that's useful
information to avoid possible confusion about when the measurement
happens.
|
|
|
|
This will make future diffs to this file much easier to read.
|
|
|
|
`ast::Item` has an `ident` field.
- It's always non-empty for these item kinds: `ExternCrate`, `Static`,
`Const`, `Fn`, `Mod`, `TyAlias`, `Enum`, `Struct`, `Union`,
`Trait`, `TraitAlias`, `MacroDef`, `Delegation`.
- It's always empty for these item kinds: `Use`, `ForeignMod`,
`GlobalAsm`, `Impl`, `MacCall`, `DelegationMac`.
There is a similar story for `AssocItemKind` and `ForeignItemKind`.
Some sites that handle items check for an empty ident, some don't. This
is a very C-like way of doing things, but this is Rust, we have sum
types, we can do this properly and never forget to check for the
exceptional case and never YOLO possibly empty identifiers (or possibly
dummy spans) around and hope that things will work out.
The commit is large but it's mostly obvious plumbing work. Some notable
things.
- `ast::Item` got 8 bytes bigger. This could be avoided by boxing the
fields within some of the `ast::ItemKind` variants (specifically:
`Struct`, `Union`, `Enum`). I might do that in a follow-up; this
commit is big enough already.
- For the visitors: `FnKind` no longer needs an `ident` field because
the `Fn` within how has one.
- In the parser, the `ItemInfo` typedef is no longer needed. It was used
in various places to return an `Ident` alongside an `ItemKind`, but
now the `Ident` (if present) is within the `ItemKind`.
- In a few places I renamed identifier variables called `name` (or
`foo_name`) as `ident` (or `foo_ident`), to better match the type, and
because `name` is normally used for `Symbol`s. It's confusing to see
something like `foo_name.name`.
|
|
`hir::Lifetime::ident` currently sometimes uses `kw::Empty` for elided
lifetimes and sometimes uses `kw::UnderscoreLifetime`, and the
distinction is used when creating some error suggestions, e.g. in
`Lifetime::suggestion` and `ImplicitLifetimeFinder::visit_ty`. I found
this *really* confusing, and it took me a while to understand what was
going on.
This commit replaces all uses of `kw::Empty` in `hir::Lifetime::ident`
with `kw::UnderscoreLifetime`. It adds a new field
`hir::Lifetime::is_path_anon` that mostly replaces the old
empty/underscore distinction and makes things much clearer.
Some other notable changes:
- Adds a big comment to `Lifetime` talking about permissable field
values.
- Adds some assertions in `new_named_lifetime` about what ident values
are permissible for the different `LifetimeRes` values.
- Adds a `Lifetime::new` constructor that does some checking to make
sure the `is_elided` and `is_anonymous` states are valid.
- `add_static_impl_trait_suggestion` now looks at `Lifetime::res`
instead of the ident when creating the suggestion. This is the one
case where `is_path_anon` doesn't replace the old empty/underscore
distinction.
- A couple of minor pretty-printing improvements.
|
|
|
|
|
|
In #129533 the main hash function changed and the order of `-Z
input-stats` output changed, which showed that it is dependent on the
hash function, even though it is sorted. That's because entries with the
same cumulative size are ordered in a way that depends on the hash
function.
This commit fixes that by using the entry label as the secondary
ordering key.
|
|
Initial implementation of `#[feature(default_field_values]`, proposed in https://github.com/rust-lang/rfcs/pull/3681.
Support default fields in enum struct variant
Allow default values in an enum struct variant definition:
```rust
pub enum Bar {
Foo {
bar: S = S,
baz: i32 = 42 + 3,
}
}
```
Allow using `..` without a base on an enum struct variant
```rust
Bar::Foo { .. }
```
`#[derive(Default)]` doesn't account for these as it is still gating `#[default]` only being allowed on unit variants.
Support `#[derive(Default)]` on enum struct variants with all defaulted fields
```rust
pub enum Bar {
#[default]
Foo {
bar: S = S,
baz: i32 = 42 + 3,
}
}
```
Check for missing fields in typeck instead of mir_build.
Expand test with `const` param case (needs `generic_const_exprs` enabled).
Properly instantiate MIR const
The following works:
```rust
struct S<A> {
a: Vec<A> = Vec::new(),
}
S::<i32> { .. }
```
Add lint for default fields that will always fail const-eval
We *allow* this to happen for API writers that might want to rely on users'
getting a compile error when using the default field, different to the error
that they would get when the field isn't default. We could change this to
*always* error instead of being a lint, if we wanted.
This will *not* catch errors for partially evaluated consts, like when the
expression relies on a const parameter.
Suggestions when encountering `Foo { .. }` without `#[feature(default_field_values)]`:
- Suggest adding a base expression if there are missing fields.
- Suggest enabling the feature if all the missing fields have optional values.
- Suggest removing `..` if there are no missing fields.
|
|
|
|
Co-Authored-By: Jacob Pratt <jacob@jhpratt.dev>
|
|
|
|
|
|
|
|
Just because the code says it's OK does not mean that it actually is OK.
Nodes with the same total size were not sorted, their order relied on
hashmap iteration.
|
|
|
|
This is a very large commit since a lot needs to be changed in order to
make the tests pass. The salient changes are:
- `ConstArgKind` gets a new `Path` variant, and all const params are now
represented using it. Non-param paths still use `ConstArgKind::Anon`
to prevent this change from getting too large, but they will soon use
the `Path` variant too.
- `ConstArg` gets a distinct `hir_id` field and its own variant in
`hir::Node`. This affected many parts of the compiler that expected
the parent of an `AnonConst` to be the containing context (e.g., an
array repeat expression). They have been changed to check the
"grandparent" where necessary.
- Some `ast::AnonConst`s now have their `DefId`s created in
rustc_ast_lowering rather than `DefCollector`. This is because in some
cases they will end up becoming a `ConstArgKind::Path` instead, which
has no `DefId`. We have to solve this in a hacky way where we guess
whether the `AnonConst` could end up as a path const since we can't
know for sure until after name resolution (`N` could refer to a free
const or a nullary struct). If it has no chance as being a const
param, then we create a `DefId` in `DefCollector` -- otherwise we
decide during ast_lowering. This will have to be updated once all path
consts use `ConstArgKind::Path`.
- We explicitly use `ConstArgHasType` for array lengths, rather than
implicitly relying on anon const type feeding -- this is due to the
addition of `ConstArgKind::Path`.
- Some tests have their outputs changed, but the changes are for the
most part minor (including removing duplicate or almost-duplicate
errors). One test now ICEs, but it is for an incomplete, unstable
feature and is now tracked at #127009.
|
|
Id, attributes, inner nodes in source order if possible, tokens, span.
Also always use exhaustive matching in visiting infra, and visit some missing nodes.
|
|
Some hir cleanups
It seemed odd to not put `AnonConst` in the arena, compared with the other types that we did put into an arena. This way we can also give it a `Span` without growing a lot of other HIR data structures because of the extra field.
r? compiler
|
|
|
|
|
|
|
|
When a `Local` is fully parsed, but not followed by a `;`, keep the `:` span
arround and mention it. If the type could continue being parsed as an
expression, suggest replacing the `:` with a `=`.
```
error: expected one of `!`, `+`, `->`, `::`, `;`, or `=`, found `.`
--> file.rs:2:32
|
2 | let _: std::env::temp_dir().join("foo");
| - ^ expected one of `!`, `+`, `->`, `::`, `;`, or `=`
| |
| while parsing the type for `_`
| help: use `=` if you meant to assign
```
Fix #119665.
|
|
|
|
|
|
Use Expr instead. Use `ExprKind::Let` to represent if let guards.
|
|
from movability
|
|
|
|
|
|
Open the FileEncoder file for reading and writing
Maybe I just don't know `File` well enough, but the previous comment didn't make it clear enough to me that we can't use `File::create`. This one does.
Fixes https://github.com/rust-lang/rust/issues/116055
r? `@WaffleLapkin`
|
|
|
|
|
